Profile image

Custom Knife

26.7k MakotoIto  5.0 years ago
26 downloads

Notes to fix

  • Create some kind of tang?
  • Input better locking mechanism

    - Consider a longer handle?

General Characteristics

  • Created On iOS
  • Wingspan 5.3ft (1.6m)
  • Length 18.9ft (5.8m)
  • Height 19.8ft (6.0m)
  • Empty Weight 1,301lbs (590kg)
  • Loaded Weight 1,301lbs (590kg)

Performance

  • Wing Loading 439,839.3lbs/ft2 (2,147,483.6kg/m2)
  • Wing Area 0.0ft2 (0.0m2)
  • Drag Points 989

Parts

  • Number of Parts 46
  • Control Surfaces 0
  • Performance Cost 123
  • Log in to leave a comment
  • Profile image

    @Flash0of0green none. Two use lockback system, one uses frame lock and needed some thightening of the very poorly made axle (it's held by a screw). I didn't do the kind of chopping guys in YouTube videos do though. These are two 8cm pocket knives and a 20cm large folder. I did some playing with the big one, though not a lot, while the smaller ones are my everyday carry knives. My current one, lockback with wood and brass handle, is quite dirable and well fitted. Its steel is a bit soft, or so it seemed when I was remaking the blade, but I only paid some $5 for it and for that price range, it is incredible.

    5.0 years ago
  • Profile image

    @EternalDarkness How much blade rattle and blade play did your knifes have when you tried chopping? Because i guarantee that you had at least a little.

    5.0 years ago
  • Profile image

    @Flash0of0green my folders never had any problem with some light chopping. They're chinese made cheap knives, though I redid blade geometry with some grinding and polishing. regardless, you need at least 85mm of handle (optimally at least 100) for a comfortable grip, and a blade for useable pocket knife doesn't need to be longer than 85mm. A knife with your mechanism would be a nice novelty, but it wouldn't surpass simpler designs in practicality.

    +1 5.0 years ago
  • Profile image

    @Enderhawk frame lockers have problems but you probably knew that already.

    5.0 years ago
  • Profile image

    @EternalDarkness couldent do any real cooping with it do to the fact that if you were to try the blade would snap off. i know i have dune this.

    5.0 years ago
  • Profile image
    26.7k MakotoIto

    I‘m thinking it will be a frame locker, with a lock to lock the extended handle to the open blade position @Flash0of0green

    5.0 years ago
  • Profile image
    26.7k MakotoIto

    I‘ll definitely see what i can do with improving the design, see if i can optimize it more for practical use sometime

    5.0 years ago
  • Profile image

    @Flash0of0green extra length allow you to grip it further from the center of mass, allowing you to chop with it.

    5.0 years ago
  • Profile image

    @EternalDarkness doesn't have a tang so the extra length kinda pointless.

    5.0 years ago
  • Profile image

    @Enderhawk frame locker or locking blade?

    5.0 years ago
  • Profile image

    Interesting design, but the blade is very poorly made. I also don't see benefits of this design. Longer handle provides better and more versatile grip when the blade is unfolded, while it is only annoying when the blade is folded and you're trying to pack the knife into the pocket.

    5.0 years ago