That’s really cool, I made a Blackhawk that flew at similar speeds, I didn’t know custom made rotors with vtol nozzles on the tips could even make it move that fast. Now, about your problem, I don’t technically know the answer but I’ll just say this. Gyros are the real deal, but they do come with downsides. It’s been a long time since I created a helicopter, I only edit my stuff now.
I flew on this beautiful plane to Orlando last year, only mine was a 757-300, such little difference though. This is my personal favorite plane, the 757 gets you where you need to be. Problem was I told my mom to let them put our bags in the bottom of the plane but she said it would be less time consuming when we arrived in Orlando. Guess what happened, I had to squeeze my suitcase through the tiny cramped aisle of the plane, it was unforgiving I’ll say that lol.
By the way, I figured out the flaps make the back end of end of the plane lift into the air, but the front will not nose up, it’s like it can’t be controlled in anyway. @DeveloperKorzalerke
Not sure how tagging works but I can tell you the name of the plane, it’s called luxury private jet, I don’t know when I’ll post it but I will probably have to make another forum before I do so. @DeveloperKorzalerke @DeveloperKorzalerke
It worked! I wanna give you a big hug right now, as I said before it took me about two years to figure this out, I know this sounds cliché but if there’s anything I can do for you just name it. @hpgbproductions
What would it be like for the engine, I’m trying the engine now, would it be the same or different? I kind of just abandoned the rotator after coming to terms that it probably would generate any lift. @hpgbproductions
I watched your video but I didn’t type anything down because there were so much that I didn’t understand. But I’m not necessarily looking to keep my thing idle, would you like to take a look at what I am talking about so you have a better understanding? @PlaneFlightX
Okay, I think I’m catching on here, this is what I have typed down, is this somewhat correct, because my other attempts were fallers @hpgbproductions @hpgbproductions
I’m a little intimidated by that video and all the functions and variables and what not, is there a way you can put this simply or is that not possible, you are actually my go to guy whenever I’m in a pickle. I do however know that overload thing where you can make the engine sound start slowly and than accelerate, but that’s as far as I know. @PlaneFlightX
Well, nothing is wrong, aside from it veering to one side when the blades tilt from the rotator, but that’s not my concern right now, I just wanted to know if there was a way to make the rotator that is underneath the main rotor to start spinning slowly but than gain speed like an actual helicopter. Or the vtol engine or nozzles to do what I just said as well, I just wanted to take realism to the next level. @DeveloperKorzalerke
Anything at this point, probably like a basic thing because I’m not a rocket scientist if you know what I mean lol, maybe something along the lines of activations, like “activate6” something like that @ReinMcDeer
I don’t know if you figured this out, my homeland security helicopter, using rotor blades that have vtol nozzles attached to them, and the rotors tilt by rotators, yet It wants to fly to the right, everything is symmetrical, I have to fly to the left to fly straight I’m looking all over for help.
I don’t want to get rid of the rotor blades because I have more control over the chopper and it’s more realistic.
Thanks a lot @KDnotSpy
That’s really cool, I made a Blackhawk that flew at similar speeds, I didn’t know custom made rotors with vtol nozzles on the tips could even make it move that fast. Now, about your problem, I don’t technically know the answer but I’ll just say this. Gyros are the real deal, but they do come with downsides. It’s been a long time since I created a helicopter, I only edit my stuff now.
I flew on this beautiful plane to Orlando last year, only mine was a 757-300, such little difference though. This is my personal favorite plane, the 757 gets you where you need to be. Problem was I told my mom to let them put our bags in the bottom of the plane but she said it would be less time consuming when we arrived in Orlando. Guess what happened, I had to squeeze my suitcase through the tiny cramped aisle of the plane, it was unforgiving I’ll say that lol.
Yeah, I’ve used fine tuner before and it messed w lot of stuff up, but it’s worth a shot. @jamesPLANESii
Gotcha thanks! @Timplanes
I have mobile and I’m not sure I’ve ever seen XML on my device, there wouldn’t be a way to do it in overload would there? @Timplanes
Oh @IceCraftGaming
Would it be mass scale? @IceCraftGaming
Thanks! @NobleMobileUser
Damn @T8flight
By the way, I figured out the flaps make the back end of end of the plane lift into the air, but the front will not nose up, it’s like it can’t be controlled in anyway. @DeveloperKorzalerke
Not sure how tagging works but I can tell you the name of the plane, it’s called luxury private jet, I don’t know when I’ll post it but I will probably have to make another forum before I do so. @DeveloperKorzalerke @DeveloperKorzalerke
205, 344 lbs, I’m not sure if that’s what you wanted, I don’t play this as often as I used to. @MrShenanigansSP
Alright thanks I’ll check it out later, I’m working on something else at the moment. @ReinMcDeer
I don’t know, it says false @ReinMcDeer
Okay, I’ll try that @MrShenanigansSP
Lol, very funny! @DeveloperKorzalerke
Darn it, well, thanks for taking your time to look at this, but to be honest I would have fixed that long ago. @DeveloperKorzalerke
Well it perfect, fyi, there a thing you can do with the letters that allow you to make them curve and wrap around the plane exterior @LanpureAirlines
It worked! I wanna give you a big hug right now, as I said before it took me about two years to figure this out, I know this sounds cliché but if there’s anything I can do for you just name it. @hpgbproductions
So I understand that I must put that in overload, in which section would that be in, engine? Input controller? @hpgbproductions
What would it be like for the engine, I’m trying the engine now, would it be the same or different? I kind of just abandoned the rotator after coming to terms that it probably would generate any lift. @hpgbproductions
I watched your video but I didn’t type anything down because there were so much that I didn’t understand. But I’m not necessarily looking to keep my thing idle, would you like to take a look at what I am talking about so you have a better understanding? @PlaneFlightX
Okay, I think I’m catching on here, this is what I have typed down, is this somewhat correct, because my other attempts were fallers @hpgbproductions @hpgbproductions
sum( smooth 0.1 (throttle, ACCEL) )
I’m a little intimidated by that video and all the functions and variables and what not, is there a way you can put this simply or is that not possible, you are actually my go to guy whenever I’m in a pickle. I do however know that overload thing where you can make the engine sound start slowly and than accelerate, but that’s as far as I know. @PlaneFlightX
So if I am getting this correctly, correct me if I’m wrong, I put whatever number where “Input” is, correct? @hpgbproductions
I’ll try to @DeveloperKorzalerke
Well, nothing is wrong, aside from it veering to one side when the blades tilt from the rotator, but that’s not my concern right now, I just wanted to know if there was a way to make the rotator that is underneath the main rotor to start spinning slowly but than gain speed like an actual helicopter. Or the vtol engine or nozzles to do what I just said as well, I just wanted to take realism to the next level. @DeveloperKorzalerke
Just go to my profile, it’s already there, it’s called the S-40 Skylander @DeveloperKorzalerke
Hey pal, I’m making another forum that I might need you help on, something that has stumped me for two years. @PlaneFlightX
Cool idea, thanks
I wouldn’t recommend this for VR because I tried it with a similar variant and it was difficult as hell. @NoobCantBuildAirPlanes
I understand that, it took me at least a few months to even get one of my helicopters to work right. @Walvis
Thanks I’ll try that. @PlaneFlightX
Sigh no, I clicked 6 @PlaneFlightX
Thank you, with help from planeflightx I got it to work @ReinMcDeer
It works, thanks for your help @PlaneFlightX
I never said 7, I said 6, anyways, I’ll try that, perhaps that’s what I was missing. @PlaneFlightX
I’m also using mobile so yeeeahhhhh. @ReinMcDeer
Problem, it won’t rotate, I’m clicking seven and nothing is happening unfortunately, @ReinMcDeer
Anything at this point, probably like a basic thing because I’m not a rocket scientist if you know what I mean lol, maybe something along the lines of activations, like “activate6” something like that @ReinMcDeer
Is that a request? @Beifenglenglong
lol, didn’t realize you also made this one, I thought I was asking someone else. @Ryusuki
Oh, okay, I must have been thinking about something else @PlaneFlightX
Interesting, thank you for this information, I think I’ve solved the problem but of course it comes with new problems. @Milo1628xa
Also, the reason why I made the main rotor tilt was because it gave the helicopter incredible cruising speed even when leveled out. @Milo1628xa
Thank you for the help, I’ll keep experimenting with it until I find e problem @Milo1628xa
Thanks I’ll check that right now @Milo1628xa
I don’t know if you figured this out, my homeland security helicopter, using rotor blades that have vtol nozzles attached to them, and the rotors tilt by rotators, yet It wants to fly to the right, everything is symmetrical, I have to fly to the left to fly straight I’m looking all over for help.
I don’t want to get rid of the rotor blades because I have more control over the chopper and it’s more realistic.
To be honest, we need that and I want that desert map so I can take some awesome screenshots. @HornetRaptor