@Hyattorama First off you need overload, When I made my STOL plane I used overload to change the weight of the fuselage blocks. Next what you want to do is choose the fuselagr blocks with the biggest weight preferrably the body and you go into over load and where is says mass scale you change it from 1 to anything lower than one It can even be zero, But always make sure to watch the center of mass. I'd do it for you but I'm working on a build rn. Looks nice man.
@PhantomBladeCorp I'm glad you understand what I'm getting at and thanks for the advice about shadows, as I don't have any proffesional drawing tools right now all I have been able to use are an average mechanical pencil, a pretty good drawing pen and my my fingers for shading/shadow effects, but that handkerchief might come in handy (and take a whole lot of strain off of my thumbs).
@Rawhide Ik that sir but I'm talking about like an accurate time stamp on the website, for example this plane was uploaded on July 17th 2018 at 11:30 pm etc.
@F104Deathtrap That's fine but if you ever do have a change in heart please give it a read. Ik it's overly long but I had to get everything out without spamming the forums.
@Rodrigo110 Ik what you said and I agree all I'm saying is that some things may not have been necessary and to choose your words a bit more carefully to avoid conflict, nor did I state anything that was untrue I was just giving my perspective on this. I have nothing more to say on this matter. It's up to you if you want to listen to what I said.
@MrDoolittle They said alot more than you can't draw but that was just the general message, I just preferred not to repeat what that person said in it's entirety. It was not very pretty at all.
@RailfanEthan Well I don't have too many followers so that probably wouldn't help much, and the said plane I talked about earlier just so happened to be spotlighted, and I believe that is the only reason I got so much attention for it and the feedback really helped me, I just wish I could get more of that because It helps me to improve my skills as a builder
@Blue0Bull Like I said I was adding perspective and wasn't here to argue, I also agreed with both of you but gave Rodrigo some advice to avoid such conflicts in the first place, thats not what this website was meant for, If I have upset or bothered you in anyway then I appologize, I'm just tired of seeing this in the comments sections of so many wonderful builds. I've seen so many amazing builders dissapear because of similar issues so I'm saying somthing in hopes that both of you listen and take something from what I'm saying and I don't care if it may sound offensive because it's the truth.
@QingyuZhou I get his point too, however saying that it cannot be Feasibly used on a build os a little too much. This was not meant to put on a build as a part THIS IS THE BUILD AS THE AUTHOR HAD MENTIONED IN YOUR ARGUMENT. He also mentioned it was also a way to test the limit of his pc, so it's quite normal for it to have over 3000 parts. This build was not made specifically for you, It was meant for people to look at and enjoy so commenting on it's functionality with a build was completely pointless and that is where I agree with @Blue0Bull. @Rodrigo110 choose your words a little more carefully next time buddy and read the tags, I don't see parts listed in there anywhere, and I'm not here to argue just providing some perspective.
@50Airworks Jesus they look a really close to each other there is just a few differences something similar happened when I entered a plane for a tournament. My ridgeracer looked almost identical to hopotumon's Icarus unlimited III
@50Airworks I actually did the hull myself after A lot of research and now I'm seeing that my design looks eerily similar to yours. I based it off of Eternal Darkness' design but it looks a lot like yours. They look almost Identical 😂 You may think I'm lying but I always give credit when I use something from someone else
@Hyattorama Unfortunately mods do not work on Ios, which means you will either need to do it on an android or computer.
@Hyattorama First off you need overload, When I made my STOL plane I used overload to change the weight of the fuselage blocks. Next what you want to do is choose the fuselagr blocks with the biggest weight preferrably the body and you go into over load and where is says mass scale you change it from 1 to anything lower than one It can even be zero, But always make sure to watch the center of mass. I'd do it for you but I'm working on a build rn. Looks nice man.
@EternalDarkness @BogdanX
Is this better?
@EternalDarkness @BogdanX Now that you mentioned that it does look weird. I'll fix that.
@BogdanX Well you can fix it if you'd like as I'm not too keen on these things as I only build fictional aeroplanes. Thx for the feedback though
@AstleyIndustries Thx M8!
@PhantomBladeCorp I'm glad you understand what I'm getting at and thanks for the advice about shadows, as I don't have any proffesional drawing tools right now all I have been able to use are an average mechanical pencil, a pretty good drawing pen and my my fingers for shading/shadow effects, but that handkerchief might come in handy (and take a whole lot of strain off of my thumbs).
@NovaTopaz Well one can only hope... Thx for the support M8.
@Rawhide Ik that sir but I'm talking about like an accurate time stamp on the website, for example this plane was uploaded on July 17th 2018 at 11:30 pm etc.
@F104Deathtrap Glad someone understands what I'm getting at :b
@Awsomur Exactly everyone has their own style, that's what makes an artist unique
@CRJ900Pilot So based off of what everyone said I will shift my time window to 11am through 2 pm eastern time.
@F104Deathtrap That's fine but if you ever do have a change in heart please give it a read. Ik it's overly long but I had to get everything out without spamming the forums.
@Rodrigo110 Ik what you said and I agree all I'm saying is that some things may not have been necessary and to choose your words a bit more carefully to avoid conflict, nor did I state anything that was untrue I was just giving my perspective on this. I have nothing more to say on this matter. It's up to you if you want to listen to what I said.
@MrDoolittle They said alot more than you can't draw but that was just the general message, I just preferred not to repeat what that person said in it's entirety. It was not very pretty at all.
@jamesPLANESii Lol sorry I was slightly triggered when I wrote this.
@aircraftarsenal123 True, true but I still felt the need to get this off my chest and share it in hopes that others would understand
@Chancey21 Well I had get people to read it somehow XD
@RamboJutter Thank you.
@RailfanEthan Well I don't have too many followers so that probably wouldn't help much, and the said plane I talked about earlier just so happened to be spotlighted, and I believe that is the only reason I got so much attention for it and the feedback really helped me, I just wish I could get more of that because It helps me to improve my skills as a builder
@jamesPLANESii Thanks I'll try it m8!
@DerekSP When would that be?
@Blue0Bull Like I said I was adding perspective and wasn't here to argue, I also agreed with both of you but gave Rodrigo some advice to avoid such conflicts in the first place, thats not what this website was meant for, If I have upset or bothered you in anyway then I appologize, I'm just tired of seeing this in the comments sections of so many wonderful builds. I've seen so many amazing builders dissapear because of similar issues so I'm saying somthing in hopes that both of you listen and take something from what I'm saying and I don't care if it may sound offensive because it's the truth.
Amazing build btw @TakeYourLife3000 , Love all of your creations.
@QingyuZhou I get his point too, however saying that it cannot be Feasibly used on a build os a little too much. This was not meant to put on a build as a part THIS IS THE BUILD AS THE AUTHOR HAD MENTIONED IN YOUR ARGUMENT. He also mentioned it was also a way to test the limit of his pc, so it's quite normal for it to have over 3000 parts. This build was not made specifically for you, It was meant for people to look at and enjoy so commenting on it's functionality with a build was completely pointless and that is where I agree with @Blue0Bull. @Rodrigo110 choose your words a little more carefully next time buddy and read the tags, I don't see parts listed in there anywhere, and I'm not here to argue just providing some perspective.
N I C E. D U D.
@Jonathanperin Thx M8😊
@50Airworks Jesus they look a really close to each other there is just a few differences something similar happened when I entered a plane for a tournament. My ridgeracer looked almost identical to hopotumon's Icarus unlimited III
@50Airworks I actually did the hull myself after A lot of research and now I'm seeing that my design looks eerily similar to yours. I based it off of Eternal Darkness' design but it looks a lot like yours. They look almost Identical 😂 You may think I'm lying but I always give credit when I use something from someone else
2 or 3 plzzzz
Nice Boat!
@jamesPLANESii It's fine I torture myself all the time
@jamesPLANESii I stayed up till 7 in the morning trying to finish tgis so I think it's safe to say I was feeling a little lazy😂
@Franticmatty
L O L .
This is insane for a bronze player, I was shit when I was a Bronze player... AMAZING Job man, this deserves more credit.
@Datom Thx bruh I spent more time on the cockpit than the rest of the plane 😂
@Franticmatty
@KSPFSXandSP oh ok thanks for the tip!
thanks! @Mumpsy
Thanks! @Treadmill103 @KSPFSXandSP @ShatSlanger @Seeras @Mijmaj @yoshicraze @Strikefighter04 @Ephwurd @mikoyanster @TakicraftCorporation @Gestour @SSSvaSSa @Franticmatty @FlyingThings @Ichko Lol I have noe lif
Thanks! @Kevinairlines
Thanks! @rubbishcraft @Sled Driver @Razor3278
@Falken You got it dud!
thx! @Falken
@Franticmatty
@DROP Yea I just did thx
@DROP And once again thanks
@DROP Nope I never saw that option I'm gonna check for that.
@DROP Really? Last time I tried it like messed it up and parts began overlapping thats why I asked for help