@LotusEngineering Time trial. Also, I've gotten a little bit further on the technical specs, move the team stuff to it's own handbook, stuff like that. so you might want to check that one forum where I posted everything.
@LotusEngineering For now, an open cockpit. I'm thinking about supplying a required cockpit assembly with a "driver" who needs the survive impacts and incidents, requiring a sturdy, well designed roll structure.
@LotusEngineering You might want to wait on designing a car before the full technical regulations are completed. i.e. the only permitted tires will be pre-made by me, with three different tire sets released as a build.
@LotusEngineering I think you misunderstand me. I don't know how else to define wing decks right now, so I'll just say that the AndyCar Mk.VI has three.
@marcox43 They can be scaled, but only up to 1.25, and down to 0.25 (mass scaled accordingly). As for tightness/damper, anything between 0-300% is allowed at this time, however I may change those values.
@LotusEngineering Not yet . im doing the sleepysleeps rn so i cant really work on the document, but i have all day tomorrow. as for other teams, make sure you have some previous experience with car design in SP.
@LotusEngineering @marcox43 Y'all might wanna wait until i finish the specs (just the first part, should finish it by tomorrow night or tuesday), and the first race will be mid-june, so no rush
@LotusEngineering Ah. I haven't finished typing that up yet. It means that the front wing has a main part on the bottom, and then progressively smaller wings above each other, separated by a small gap.
@AircroftDesigin @marcox43 Or something like Sebring. I was also thinking of an actual oval track, as well, because the Oval Office is way too small and banked.
@LotusEngineering Just getting to it now :)
+1@jamesPLANESii
@Delphinos
Check my bio for the rules and applications (not finished yet)
@LotusEngineering @jamesPLANESii @marcox43
+1Check my bio for the rules and applications (not finished yet)
@TakicraftCorporation @Spikerya @Supermini555
+1Check my bio for the rules and applications
@LotusEngineering Yap
+1@LotusEngineering Time trial. Also, I've gotten a little bit further on the technical specs, move the team stuff to it's own handbook, stuff like that. so you might want to check that one forum where I posted everything.
@LotusEngineering For now, an open cockpit. I'm thinking about supplying a required cockpit assembly with a "driver" who needs the survive impacts and incidents, requiring a sturdy, well designed roll structure.
+1@LotusEngineering Yeppers!
+1@LotusEngineering If not by tonight (Central time) then definitely by tomorrow afternoon.
@LotusEngineering This is permitted, as long as it doesn't extend left- or right-ward beyond the outer edge of the tire.
+1@TakicraftCorporation Yep. Working on it now.
@LotusEngineering You might want to wait on designing a car before the full technical regulations are completed. i.e. the only permitted tires will be pre-made by me, with three different tire sets released as a build.
+1@LotusEngineering I think you misunderstand me. I don't know how else to define wing decks right now, so I'll just say that the AndyCar Mk.VI has three.
+1@LotusEngineering OH SH!T ACTUALLY!? I'm proud of my babby. Also the FSGK formula will be similar to that of the Mk.VI, so keep that in mind
+1@LotusEngineering Yes, you're right about the wing scaling. If you need to you can just take a wing piece off of the AndyCar Mk.VI.
As for the angles, those are just an example of how to evenly distribute the angles across multiple decks.
+1@marcox43 They can be scaled, but only up to 1.25, and down to 0.25 (mass scaled accordingly). As for tightness/damper, anything between 0-300% is allowed at this time, however I may change those values.
@TakicraftCorporation I'm writing up the suspension rules now.
@LotusEngineering Not yet . im doing the sleepysleeps rn so i cant really work on the document, but i have all day tomorrow. as for other teams, make sure you have some previous experience with car design in SP.
+1@Aljon050705 loli named it Formula SGK
@marcox43 The suspension is allowed only one spring part per wheel. As for scaled rotators, they are fine, so long as their mass is scaled accordingly
@LotusEngineering
Length: Max 25ft, Min 20ft
Width: Max 9.5 feet, min 8.5ft
height: under 5.75 feet
@LotusEngineering @marcox43 Y'all might wanna wait until i finish the specs (just the first part, should finish it by tomorrow night or tuesday), and the first race will be mid-june, so no rush
+1@LotusEngineering Also scale and massScale are both XML values of all parts.
+1@LotusEngineering Ah. I haven't finished typing that up yet. It means that the front wing has a main part on the bottom, and then progressively smaller wings above each other, separated by a small gap.
+1@LotusEngineering Where does it say you can only have 6?
@RailfanEthan @DemonSniper8
@LotusEngineering @marcox43 @jamesPLANESii
@TheCreatorandDestroyer99 Noice
@Delphinos Yep! and it's gonna get better!
+1@LotusEngineering Multiple people on a team (at least two), a driver for each team, and a license for the team to participate in these events.
Also I am writing up a public PDF for anyone to view at any time.
+1@LotusEngineering Same! I'll be releasing the construction regulations shortly. Then yall can start workin!
@jamesPLANESii Lel. When you speak of it out loud, it has to be in a screaming voice XD
+1@LotusEngineering @marcox43 I'm writing up the regulations right now. Meanwhile, expect the formula to be similar to the AndyCar Mk.VI.
+1@RailfanEthan uh
@TheCreatorandDestroyer99 The car was appreciated too, right?
@Minecraftpoweer I wish it was like that for me, however the folder on macOS must be somewhere else. thanks for being so willing to help though!
@Tully2001 Where would that be on macOS? I've done extensive searching but I still can't find it
@Tully2001 I have the macOS version. However the folder containing AircraftDesigns, Mod folder, etc is there, but the ModTools folder is absent.
@TheCreatorandDestroyer99 This is exactly what I meant! Awesome idea!
+1@smaug aye...?
@Tully2001 uh no soory
@Tully2001
@ChristianBoer Thank you! Glad to see my hard work made something people enjoy!
@Jetpackturtle aw shucks, dude
@EliteArsenals24 Thank you!
@Strikefighter04 YEEEEEEEEEEEE
HOORAY FOR THIS FELLOW HERE!! @ZeDaru57
@greasytortle @FastDan OMIGOUSH HEBRBRBRBRBEBR RBRBEBEE BEBE E EBR
+2@AircroftDesigin @marcox43 Or something like Sebring. I was also thinking of an actual oval track, as well, because the Oval Office is way too small and banked.
+1