I've always wondered why Calvin cars don't have common names like Havoc or Lombardi...
By the way, I would name it "Bergspass" (which means "pass" in Swedish).
@Marulk I see... well... there are people like that.
Personally, I wanted to tell them that I wanted our relationship to be just within SimplePlanes, so I guess I'll hold off on Twitter...
It's not that it's sensitive or anything like that (I turned 19 in June this year so that's okay), but it's hard to rephrase, but it just means "don't make other people feel bad."
There isn't much written on my Twitter account...
@MyBelovedHoshimachi Look before you block
I was happy to support them.
But I can't teach Twitter.
Because we've only known each other for a short time.
If you can promise not to cause trouble to others,
It's okay to follow me if you'll protect me.
If you promise me this, I will tell you.
In my opinion, this is the third best Lamborghini Gallardo ever made.
Also, I have a request. Could you make a potato version of the 2005 Soldat Crinale that I uploaded?
@MasterPlanes101 I made this car the same coloring as your thumbnail image, so I would like to upload it and give it to you as a thank you for each donation. Is that okay?
@A380lover800 I might be different from Vtubers.
I have created this avatar using VRoid, but I have no intention of making it speak on YouTube at the moment.
I have a feeling that I would like to try it in the future,
I'm still learning about the copyrights of games, etc., so I won't distribute it until I'm sure everything is perfect.
It may be too wide than the previous car...
In terms of appearance, I think it would be better balanced if it were the width including the over fender, rather than the width of the entire body.
@dussts We were able to reduce the final width to 2.1m, but if we reduced it any further, it would roll over.
https://www.simpleplanes.com/a/n4ftRg/2023-Sakura-Eternity
Here is the latest version.
@dussts With my technology, I simply cannot suppress the base car's width of over 2m. But I think at least Eternity V3 '23 has better balance than the initial Eternity.
The setting is that ``Eternity, which was released in 1984, was fully restored and redesign by an individual in 2023,'' so MasterPlanes101's version of Eternity is the original individual.
By the way, the original cars for Eternity are the Ferrari Testarossa and the Ferrari 512BB.
I've always wondered why Calvin cars don't have common names like Havoc or Lombardi...
By the way, I would name it "Bergspass" (which means "pass" in Swedish).
@Marulk I see... well... there are people like that.
Personally, I wanted to tell them that I wanted our relationship to be just within SimplePlanes, so I guess I'll hold off on Twitter...
It's not that it's sensitive or anything like that (I turned 19 in June this year so that's okay), but it's hard to rephrase, but it just means "don't make other people feel bad."
There isn't much written on my Twitter account...
@MyBelovedHoshimachi Look before you block
I was happy to support them.
But I can't teach Twitter.
Because we've only known each other for a short time.
If you can promise not to cause trouble to others,
It's okay to follow me if you'll protect me.
If you promise me this, I will tell you.
@MasterPlanes101 Upload complete.
https://www.simpleplanes.com/a/3fLJ8d/2024-Sakura-MIKO
In my opinion, this is the third best Lamborghini Gallardo ever made.
Also, I have a request. Could you make a potato version of the 2005 Soldat Crinale that I uploaded?
@SILVERPANZER I see...Thank you for the alert.
@Pan I don't feel offended; in fact, I'm glad that I was complimented.
@Pan I don't know why it happened, but please don't tell anyone to leave too often.
@MasterPlanes101 It's completed, so please take a look.
https://www.simpleplanes.com/a/M4J7QN/2024-Calvin-GX33-Oscurita
@MasterPlanes101 May I upload an improved version of this car?
Please reply if you like…
@MasterPlanes101 You've gotten good at making roofs...
I think it would look even cooler if I could just shorten the overall width...
@AircraftExperimental
it is complete.
Tagging correction
@ConvoyPerson
@DatFiat126Fan19 Sorry... I didn't know that...
@DatFiat126Fan19
@FlatterGuy Is it okay if I add the aero and drift systems to this car and upload it?
Please reply if you like...
@dussts Okay. go ahead and use it.
@MasterPlanes101 I've uploaded it, so please come and see it if you'd like...
@MasterPlanes101 I made this car the same coloring as your thumbnail image, so I would like to upload it and give it to you as a thank you for each donation. Is that okay?
@AicE Sorry to trouble you, but please check it yourself.
@dussts I created the Ridge Racer "Crinale" based on this car. Would it be okay if I upload it?
Please reply if you like…
@dussts Is it okay if I make the Ridge Racer duel car "Angelus" based on this car?
Please reply if you like...
@MasterPlanes101 The remake version of Cyclops has been completed, so please take a look if you like.
@A380lover800 I'm not a VTuber at the moment, but I would like to become one someday.
In short, I am "not a VTuber yet."
@A380lover800 I might be different from Vtubers.
I have created this avatar using VRoid, but I have no intention of making it speak on YouTube at the moment.
I have a feeling that I would like to try it in the future,
I'm still learning about the copyrights of games, etc., so I won't distribute it until I'm sure everything is perfect.
@MasterPlanes101
It has now been released, so please take a look if you like.
Is it okay if I upload this manufacturer's new car "REUNION"?
Please reply if you like...
Is it okay if I modified this car?
Please reply if you like...
@Ownedpilot
Congratulations on getting platinum.
Actually, my goal is the quality of the work you create.
…and I support you in the henceforth !
It may be too wide than the previous car...
In terms of appearance, I think it would be better balanced if it were the width including the over fender, rather than the width of the entire body.
@dussts It's completed, so please take a look…
@dussts I'll try as much as I can
@KBS24, could you make this car into an Ai racer…?
@dussts I actually wanted to upload this last year for Ridge Racer's 35th anniversary, but I forgot about it, so I decided to upload it now.
@Ownedpilot I rebuilt the Aquila CR1 Crinale Edition as per your advice.
Please take a look if you like.
@dussts We were able to reduce the final width to 2.1m, but if we reduced it any further, it would roll over.
https://www.simpleplanes.com/a/n4ftRg/2023-Sakura-Eternity
Here is the latest version.
The 2005 Crinale is also 4,995mm long, 2160mm wide, and 1124mm high, so we would like to aim for those numbers.
@dussts With my technology, I simply cannot suppress the base car's width of over 2m. But I think at least Eternity V3 '23 has better balance than the initial Eternity.
@LowtusF139 If you ask me, it looks exactly like the HighSpeed Étoile machine lol
It feels like a villain character is riding it.
Is it okay if I remake this car?
Please reply if you like...
Improvements include displaying the number of gears and changing the shape of the roof.
As a thank you gift, I will give @MasterPlanes101 a car called All-American Fantasia.
Could you please make "Soldat Crinale 2013" into an AI racer?
I thought about Calvin's new car "Attirare", but I couldn't make it private so I just uploaded it. I'm also looking forward to the remake.
@MasterPlanes101 Please wait, I will upload it now...
@MasterPlanes101 I privately uploaded the 2023 version of Eternity, so I would like you to remake it...
Is it okay to remake this car?
Please reply if you like...
@MasterPlanes101 The complete version of Zodiac II has been completed, so please take a look if you like...
The setting is that ``Eternity, which was released in 1984, was fully restored and redesign by an individual in 2023,'' so MasterPlanes101's version of Eternity is the original individual.
By the way, the original cars for Eternity are the Ferrari Testarossa and the Ferrari 512BB.
I have uploaded Vengence's circuit specification "Vengence EVO", so please take a look if you like...