depending on if the traffic is routed through the existing router or not, and if the router is specifically set to keep the port closed or has some sort of port lock that keeps all ports closed excepting the one you have specifically open.
your traffic should have no problem if your existing router has no locking program. SOME HAVE THEM AUTOMATICALLY INSTALLED FACTORY so make sure that you have a router that doesnt. easiest way to test is to hook it up and try.
@RedstoneAeroAviation build a slow car first with minimal engine power, and slowly raise the engine power until it needs modification and continue raising the power until it is a good fast vehicle.
@BirdOfSteel IK but there is always the chance of crashing or whatnot, and with an actual character, you could take better screenshots. maybe there should be a way you could get out of the cockpit and walk. idk just a suggestion
i have heard that there were supposed to be a crossbow upper using the lower reciever of an AR or M series rifle that would actually auto reload the string by firing a low powered blank, might a be a cool project
@panckakebro9 lol, 0:51 or 0:50 depending on the flight. But I have one that does 0:39 about 50% finish rate, I just can't seem to get the reliability to stick at faster speeds
Does anyone actually have a racer that constantly makes better than 45? I'm having problems with consistency of rings, they always seem to go wildly around one or more rings
@PlanesOfOld really sorry to be the bearer of bad news, but I seem to have found that it is actually impossible to make your logo, I was able to angle each corner/triangle piece, but it seems that there is no actual way that they can connect to another piece, I have tried manual code and nudging and neither of them worked, unless you can find a PC user that can somehow glitch your parts together, it is impossible to do.... Sorry mate, I did everything I could... :(
depending on if the traffic is routed through the existing router or not, and if the router is specifically set to keep the port closed or has some sort of port lock that keeps all ports closed excepting the one you have specifically open.
your traffic should have no problem if your existing router has no locking program. SOME HAVE THEM AUTOMATICALLY INSTALLED FACTORY so make sure that you have a router that doesnt. easiest way to test is to hook it up and try.
that would be awesome!
whats your turn radius?
P.S. i moved it off the other page, the mods get mad at people chatting in the tourny page
does ANYONE know what its actually for?
@BirdOfSteel mhm. thats kinda what i was saying, then you could take screenshots of your vehicle without looking at the cockpit
@RedstoneAeroAviation build a slow car first with minimal engine power, and slowly raise the engine power until it needs modification and continue raising the power until it is a good fast vehicle.
@BirdOfSteel IK but there is always the chance of crashing or whatnot, and with an actual character, you could take better screenshots. maybe there should be a way you could get out of the cockpit and walk. idk just a suggestion
i have heard that there were supposed to be a crossbow upper using the lower reciever of an AR or M series rifle that would actually auto reload the string by firing a low powered blank, might a be a cool project
there needs to be a walk around mode for simpleplanes so that we could really enjoy the maps a bit better
with some detail, this would probably look fantastic
VN
looks fake
looks fake
looks fake
looks fake
@AudioDud3 give me a few minutes, I'm trying to upload stuff
Oh...
ive seen the revenge of the red, walrus army, and a few others, but i dont think there are really that many that are up and running...
bruh, is there even some list somewhere that denotes the factions? fr real...
very nioce!
FINALLY A CONTROL CUBE!!!!!
@LianW thx mate!
@AudioDud3 lol
@AudioDud3 if I had uploaded just slightly faster I would've made it to the next, the plane that beat min went 0:50 and mine 0:51...
@panckakebro9 lol, 0:51 or 0:50 depending on the flight. But I have one that does 0:39 about 50% finish rate, I just can't seem to get the reliability to stick at faster speeds
those tracks though... nice work
its so huge
Does anyone actually have a racer that constantly makes better than 45? I'm having problems with consistency of rings, they always seem to go wildly around one or more rings
@AudioDud3 fr real though... XD
3 days work finally down solid at 0:50
crying deeply inside
I have no chance XD
my current 2.1 model finished with a 0:51 sec minimum, sometimes it finishes as low as 0:49
@AudioDud3 wait but what's your time?
I've got all the way down to 0:43 but its 50-50 win loss
@CALVIN232 nudged up front behind the first or second fuselage piece
@AudioDud3 beat that mate. XD
@dragunove29 thx
@audiodud3 down to 0:54 finish and 100% rings
I think you build planes better than I ever will mate... XD
Probably one of the most inventive planes I have yet seen!
@AudioDud3 and thx mate
@RedstoneKrone well, thank you!
Looks awesome!
Why didn't you make a forum post? I know there are a few players out there who aren't happy about announcements via uploads...
Its adorable!! XD
so many props given. such wow.
@Nuteboy100 you probably need ES file explorer and move it into the filepath Android/Data/com.jundroo.simpleplanes/Files/Mods from your download file
@Nuteboy100 did you move it to the mods file?
@PlanesOfOld really sorry to be the bearer of bad news, but I seem to have found that it is actually impossible to make your logo, I was able to angle each corner/triangle piece, but it seems that there is no actual way that they can connect to another piece, I have tried manual code and nudging and neither of them worked, unless you can find a PC user that can somehow glitch your parts together, it is impossible to do.... Sorry mate, I did everything I could... :(
@PlanesOfOld alright, I see if I can't get it done soon, hopefully within a few hours
You will need to get back to me within the next hour or so BC I don't have steady internet...so I may not be back on for a few days possibly.