Profile image

how to remove autoroll while pitching????

3,225 JeskoGoesVROOM  2.3 years ago

i've made it somewhat unstable now but when i pitch in any way it starts rolling to the right like crazy
ik there's a billion posts about this but pls help
and i don't want it just nullified, i want it gone completely
make it so gone that it gets sent to alpha centauri and can never come back
i'm seriously desperate to get this damn plane working as you can see

  • Log in to leave a comment
  • Profile image
    95.9k ReinMcDeer

    @Alisuchanka this, 100%

    2.3 years ago
  • Profile image

    you're stalling the main wings, and your ailerons, try to keep a safe AoA by reducing your elevator's deflection degree, or use Flat Bottom wings, They can be operated at higher AoAs than symmetric and semi-symmetric before stalling

    +2 2.3 years ago
  • Profile image

    You're stalling the control surfaces and thus leaving the realm of controlled flight. This happens on the F-5 when you pull too hard at low speeds. If you're intending the aircraft to be unstable a fly-by-wire system could be helpful, or you could just do what F-5 pilots were told to do and be careful with the stick at low speed

    +1 2.3 years ago
  • Profile image
    11.6k JesusChrist

    Moving the center of mass forward a lot (making it stable) should fix the problem.

    If you don't want to do that, you could also open the wings in overload, add liftScale and set it to a number higher than 1.

    +2 2.3 years ago
  • Profile image
    2,221 AEGIS

    Do you have all wings mirrored to the other side? I had this problem and the wings probably didn't mirror correctly

    +1 2.3 years ago