M.Corp RA-1 Recurve is a multirole radar component of the Repulse air defense system, mounted on the M.Corp Titan high mobility chassis.

Design:

RA-1 Recurve is an all-weather, all-altitude Active Electronically Scanned Array capable of and tracking up to 160 targets at the range of up to 300km. Its functions include IFF (Identification Friend or Foe), ranging, tracking, identification of target type and, in engagement mode, guidance of multiple missiles. It is operated by a crew of three in the compartment behind the radar. It can maintain communication with a command post or launchers up to 60km away, allowing the battery to be very spaced out. It can also act as the command post for the battery.

Operating modes include:

• Fan scan - radar pointed in one direction, scanning ±40° horizontally and vertically;
• High altitude scan - radar rotates at 30rpm, scanning +20° to +40° in elevation, 360° in azymuth;
• Low altitude scan - radar rotates at 30rpm, scanning -3° to +5° in elevation, 360° in azymuth;
• Engagement mode - radar pointed in one direction, tracking up to 160 targets in the ±40° vertical and horizontal cone, providing guidance information for semi-active or passive radar guided missile for up to 40 target simultaneously. Only mode available on the build.

Features:

- Perhaps the first quality radar system on SP;
- Sturdy off-road chassis;
- Details;
- Lots of moving parts.

Instructions:

• G = struts/lights off;
• 1 = erect the radar;
• 2 = extend the antenna;
• 8 = unlock the radar traverse;
• Yaw = traverse the radar;
• Pitch + Roll = drive.

Enjoy.