READ CAREFULLY! If you read the description I made with my creation called Aircraft, I mentioned that I had trouble with one of my creations. That creation happened to be this one right here, but instead of it being malfuncfional, it accually works. It’s an helicopter made for the transportation of people and goods if needed. It has an accuall cabin for 4 seats, even though they aren’t very comfy and overhead baggagecompartments. It also has a seat in the cockpit, as it should have, and a very special feature. The feature being that it is able to turn around 90 and 180 degrees around a different way than just with the standard Jaw function. Here’s how to do it: Take-off and retract landing gear, climb to a decent hight (at least 2000 feet just to be sure), put VTOL up, deactivate AG8 and put VTOL back up again. Make sure you fly a bit backwards. For the 90 degree turn keep the rotor on, for the 180 degree turn cut the throttle. When the rotor has slown down enough so you can see each rotorblade individually (with the 90 degree turn this isn’t the case), activate AG1 and a second later AG2, after the turn is done, turn on the rotor if needed and fly forwards (for the 180 degree turn wait a bit untill you’ve lessened your descend). I hope the instructions aren’t too complicated for you and enjoy!