Profile image

AMX lecrerc

23.4k marcox43  8.3 years ago
29 downloads

my new entry for the tournament, now its 100% reliable on ring 6 and has an average time of 1:15-1:17 on both sides. features moving turret and gun and a nice suspension.

General Characteristics

  • Created On Windows
  • Wingspan 30.9ft (9.4m)
  • Length 31.9ft (9.7m)
  • Height 11.2ft (3.4m)
  • Empty Weight 7,356lbs (3,336kg)
  • Loaded Weight 7,621lbs (3,457kg)

Performance

  • Wing Loading 19.6lbs/ft2 (95.5kg/m2)
  • Wing Area 389.7ft2 (36.2m2)
  • Drag Points 5827

Parts

  • Number of Parts 149
  • Control Surfaces 0
  • Performance Cost 1,050
  • Log in to leave a comment
  • Profile image
    23.4k marcox43

    @brucethemoose nice, that 0:55 beast by casualty, how many times crashed onto my tank?

    8.3 years ago
  • Profile image

    Doesn't always get that 1:15 time (usually 1:25 for me), but this thing really is as tough as a tank. One of my cards fliped it twice, and it just got up and finished every time.

    Reliability + the good time may very well win you the race.

    8.3 years ago
  • Profile image

    @marcox43 Well with the new wings I got off this... the limits I'm pushing are becoming insane. I just had to create a 4 (and 5 becuase I wanted too) part re-enforced suspension part.

    8.3 years ago
  • Profile image
    23.4k marcox43

    @Typhlosion130 feel free to grab whatever you want from this tank, i got the idea from the tank because i heard someone else was entering a tank, and also by having so much wheels, it doesnt need a complex suspension.

    8.3 years ago
  • Profile image

    @marcox43 which I understand that said all vehicles in this tournament need down force. i'm juast asking if you mind if I use a modified version of the wing on this thing. and a driect rip of the wing on your last tank :P

    8.3 years ago
  • Profile image
    23.4k marcox43

    @Typhlosion130 no problem xdd, it will be funny to see how my tank rams someone elses car and pushes him till ring 6

    8.3 years ago
  • Profile image
    23.4k marcox43

    @Typhlosion130 since a real tanks weights about 40 tons and this thing only has 3.6 tons, i needed downforce to keep it on the groung and make it steerable, i tried with more weight, but was a total fail, so it only relies on downforce and 14 wheels(4 steerable)

    8.3 years ago
  • Profile image

    @marcox43 Honestly at this point. I want to just let you have this design. I want to kinda keep my own design. I am using parts of the rear wings on this and your previous tank on my next vehicle however if you don't mind but I am really looking forwards to seeing this tank potentally win this tournament

    8.3 years ago
  • Profile image
    23.4k marcox43

    @Typhlosion130 try dissassembling mine to see how i built it, the side panels are wings, so it can turn at high speeds, the chassis its just a chassis with some wings nudged on the top, the front upper plate is the chassis and a rotated wing to create downforce, at the sisdes there are 2 little wing for more downforce, the back aleiron its that wide to not roll while flying, also it is rotated to 30° to compensate the front aleiron, the turret is purely esthetical, but is usefull when someone blocks your way and you move him with the gun barrel, the suspension its pretty simple to build, i limited the engine power to 475hp each one because it was hard to handle such power on spawn 2(it only has 2 engines) the wheels are a salad of traction combinations xdd, i hope to have helped you

    8.3 years ago
  • Profile image

    I tried making my own tank but after 5 proto types. none of them were even remotly stable so I'm ginvg up on that.

    8.3 years ago
  • Profile image

    Ok... I am in lteral shock at how good this thing performs.... like holy crap...

    8.3 years ago
  • Profile image

    now you have me thinking... going to build some prototypes. see what I can do. ;)

    8.3 years ago