AT-12 Wolverine
* AT-12 Wolverine*
* In active service*
AG5: (Nav lights) AG7:(Fire ATGM's)
The plane is balanced quite well with take off loadout and has a realistic speed and flight profile. There is Trim if any is required after using ordnance.
This upload brings me back full circle as it is a rebuild/remaster of the first plane I ever built which was done before I even knew how to nudge a part. In the end I ended up with a plane I was happy with but with the help of finetuner/overload I wanted to revisit it. The result is the AT-12 Wolverine.
Its real world inspiration comes from the A-29 Super Tucano and AT-6 Wolverine. I wanted my advanced trainers to be combat capable light attack planes as well that would do well in low intensity/COIN type operations sparing my higher cost per flight hour jets for more dangerous duties.
The AT-12 Wolverine is a turboprop light attack / Trainer aircraft designed for COIN, close air support, and Aerial reconnaissance missions in low threat environments. Designed to operate in extreme temperature and terrain, the Wolverine is highly manueverable, has a low heat signature, and incorporates fourth gen. avionics and weapon systems to deliver precision guided munitions.
Specifications
General Characteristics
- Predecessor LS A-12 Anvil II
- Created On Windows
- Wingspan 48.8ft (14.9m)
- Length 41.8ft (12.8m)
- Height 15.8ft (4.8m)
- Empty Weight 7,343lbs (3,331kg)
- Loaded Weight 13,100lbs (5,942kg)
Performance
- Horse Power/Weight Ratio 0.467
- Wing Loading 22.5lbs/ft2 (109.7kg/m2)
- Wing Area 582.9ft2 (54.2m2)
- Drag Points 10512
Parts
- Number of Parts 491
- Control Surfaces 8
- Performance Cost 1,465
@XjayIndustrys Thanks!
Beautiful!
@KidKromosone Thanks!
Very well done!
@BogdanX Thanks!