The Wiki:
The Scottish Aviation Bulldog is a British two-seat side-by-side (with optional third seat) training aircraft designed by Beagle Aircraft as the B.125 Bulldog.
The prototype Bulldog flew on 19 May 1969 at Shoreham Airport. The first order for the type was for 78 from the Swedish Air Board. Before any production aircraft were built, Beagle Aircraft ceased trading and the production rights for the aircraft, with the Swedish order, were taken over by Scottish Aviation (Bulldog) Limited. All subsequent aircraft were built at Prestwick Airport by Scottish Aviation, and later by British Aerospace.
Controls and Features:
Controls:
-Ag1: Open Canopy
-Ag2: Landing Light
-Ag3: Navigation Lights
-VTOL: Flaps
Takeoff:
50% flaps, full throttle. Rotate @ 100 mph. Reduce flaps, adjust trim for level flight. Should cruise around 125 mph.
Landing:
Full flaps, trim to 0 reduce throttle for level flight Keep speed above 75mph til touchdown.
Features:
-Custom Control Surfaces
-Custom Interior
-Custom Paint
As Always:
A unique and fun little trainer plane for all your learning o fly needs. Ill be honest, this request came from a co-worker of mine who is currently refurbishing one of these. She is currently waiting to finish the paint while it is getting the electronics worked over. She also told me that they opted for a 3 blade prop on their plane because they liked the look, so I have put one here to better reflect her plane. As always, please let me know if you have suggestions for improvement or if there is a vehicle you would like to see recreated. Thank you so much for stopping by, and enjoy your flight!!
Specifications
Spotlights
- Chancey21 6.2 years ago
General Characteristics
- Created On Windows
- Wingspan 31.4ft (9.6m)
- Length 27.7ft (8.5m)
- Height 8.2ft (2.5m)
- Empty Weight 3,029lbs (1,373kg)
- Loaded Weight 4,236lbs (1,921kg)
Performance
- Horse Power/Weight Ratio 0.236
- Wing Loading 17.2lbs/ft2 (83.9kg/m2)
- Wing Area 246.4ft2 (22.9m2)
- Drag Points 6406
Parts
- Number of Parts 305
- Control Surfaces 7
- Performance Cost 1,097
@jamesPLANESii Ill have to try it
I game transform tool. @Sgtk
@jamesPLANESii Is that the XML editor mod or the ingame transform tool?
If you use the transform part tool to rotate the part, the attachment points don’t change. @Sgtk
@vmf144 Thank you!!
@jamesPLANESii I'll have to try it. usually when I do that everything the rotator is attached to will latch onto some other stationary part and no longer move.
All you need is the transform part tool and you only need to rotate the rotator lol. @Sgtk
@DestinyAviation
@getorge
Thank you!!
@jamesPLANESii Thank you. I didnt notice the opposite ailerons. As for the rudder, ive always had a hard time doing the multi edit order correctly to get everything to move after making adjustments. Im usually pretty satisfied when I can get it to function.
It looks nice though, so I’ll give you that.
Ailerons go in the wrong direction, hinge for the rudder not rotated so it goes in line with the hinge.
Np comrade! @Sgtk
@Hyattorama Thank you!!
This is a really awesome little plane! Great work man, I love it!
@Strikefighter04
@DemonSniper8
@RCBOSS
Thank you all do much!!
@Chancey21 Thank you so much!!
Looks very good, i LOVE this plane
@Sgtk Np!
@SaturnV Thank you!!
No problem! : )@Sgtk
Thank you @ JettStorm!!
@Sgtk no problem!
Thanks @Hayhayjam664!!
@MrSilverWolf
@Mr63711
Thank you so much!!
@RamboJutter
@FGW2014
Thank you both!!