Activation groups 1-4: (De)Activates engines 1-4
Activation group 5: Control dampener. Only use when in flight.
Activation group 7: (De)Activates) flaps
VTOL slider to control propeller pitch
Trim slider to control flaps and trim
Takeoff instructions: VTOL slider 1/2 up. 100% power. Trim at whatever you want except for up. Pull up at 150 mph.
Cruise instructions: VTOL slider 1/2 up. 70% power at 30,000 feet. Activation group 5 if you don't want to keep messing with the controls.
Final approach. Just keep the VTOL slider at 1/2 and the speed at 200 mph.
Landing: Flaps down. VTOL slider at 1/2 up. Pitch up to 5 degrees and descend at around 3 m/s until you hit the runway. Brake if you feel like it. if not, just set the VTOL slider to 1/2 down and the throttle to 40% until you stop.
AND DON'T HOLD THE BRAKES OR YOU'LL GO TO GULAG.
Just tap on it lightly.
if not, the plane will bounce. And so will you to the gulag.
Also fitting "mom" into the aircraft registration was too hard
And trust me, that was the tamest registration that I could think of.
Specifications
Spotlights
- mikoyanster 6.4 years ago
General Characteristics
- Predecessor QC-12.1 Swing tail freighter
- Successors 1 airplane(s)
- Created On Windows
- Wingspan 143.8ft (43.8m)
- Length 138.7ft (42.3m)
- Height 36.4ft (11.1m)
- Empty Weight 121,786lbs (55,241kg)
- Loaded Weight 179,732lbs (81,525kg)
Performance
- Horse Power/Weight Ratio 0.089
- Wing Loading 29.0lbs/ft2 (141.7kg/m2)
- Wing Area 6,190.9ft2 (575.2m2)
- Drag Points 13952
Parts
- Number of Parts 542
- Control Surfaces 0
- Performance Cost 2,670
Required Mods
-
_Instrumentation
by Gestour
Version 1.0 (2/7/2018 2:03:32 PM)
View Mod Page -
_Mechanical_Instrumentation
by Gestour
Version 1.1 (7/1/2018 3:21:27 AM)
View Mod Page
“Ur-Gay” lol
no u
No u
no u
Could u make one without mods
@KerlonceauxIndustries Yes. This also applies my other airliners, since most of them use this cockpit as well.
Your screenshots are bad. You’ve cut the nose and wing off your first screenshot, and it is wonky, and it’s faded. and you’ve cut the end of the wing off in your second screenshot, and it is wonky and faded again. Your 3rd one is ok though. You really should just stick to taking the pictures of your planes in the designer, rather than adding pictures to the designer using unity, and using them. It looks a lot cleaner, and if you use the right designer, you can get lots more upvotes.
No u
Ur-gay
The plane looks beautiful! , and those screen shots... I don’t know how you took them with the props spinning, but thay are just beautiful 🙃
Tamest, Not that Tame
Lol
slicc
This is very nice! Good job!
Ur gay
@BrianAircraftsNew There would have been a "mom" in the middle. But since there was no space, it now looks like an aircraft registered in Ukraine.
This looks epic man, I'll take it for a spin later.