No Tags
Just please fix this reward is 5 upvote or more...
Specifications
Spotlights
- V 7.2 years ago
General Characteristics
- Successors 1 airplane(s) +27 bonus
- Created On iOS
- Wingspan 19.0ft (5.8m)
- Length 24.5ft (7.5m)
- Height 10.3ft (3.1m)
- Empty Weight 4,921lbs (2,232kg)
- Loaded Weight 7,182lbs (3,257kg)
Performance
- Power/Weight Ratio 1.877
- Wing Loading 135.1lbs/ft2 (659.8kg/m2)
- Wing Area 53.1ft2 (4.9m2)
- Drag Points 2661
Parts
- Number of Parts 75
- Control Surfaces 0
- Performance Cost 288
@Milo1628xa thx I will follow you so I can find you
thnx for the upvotes @loopy200. if theres any other creations u have trouble with i can help u out.
@Milo1628xa you been awarded 5 upvotes
@Milo1628xa don't worry I see where I got wrong.
@Milo1628xa thanks bro you will get 5 upvotes after I go to school ok.
https://www.simpleplanes.com/a/Lr15B4/Loopy200-creation-Fixed
the two rotors are supposted to rotate in opposite directions to counterbalance the turning effect caused by the rotors themselfs. the center of mass is suppost to be underneath the rotors for proper vertical takeoff. the gyroscopic stability was too high for such a lightweight helicopter and the pitch and roll ranges should be reduced for better flight performances. also due to the fact that you connected the turn of the vtol nozzles to the throttle you can't use full throttle or the rotors won't spin properly. if your plane had only 1 rotor a second rotor could be placed at the back to counterbalance the spin (the settings of that back rotor need to be as low as possible, but the throttle can be set to yaw if the rotation isn't too much (meaning the rotor isn't really needed)). else u can still experiment with ur creation but do keep in mind the things said above.
Uh, what's wrong?