I need help with this car. It, for some unexplained reason, likes to go to the left for no reason. Ive tried everything from adding dead weight to the right side, to adding jets to keep the car on the ground. Id apreciate some help.
if you can fix this ill give you a shoutout on this car's post, 10 upvotes and a spotlight if possible.
Thanks in advance!
Controls: Throttle to acclerate.
Roll to steer.
AG1 for rain lights.
AG2 for jet engines made for ground effect simulation.
Specifications
General Characteristics
- Successors 3 airplane(s) +52 bonus
- Created On Android
- Wingspan 8.5ft (2.6m)
- Length 15.2ft (4.6m)
- Height 4.6ft (1.4m)
- Empty Weight N/A
- Loaded Weight 2,587lbs (1,173kg)
Performance
- Power/Weight Ratio 5.21
- Wing Loading 274.8lbs/ft2 (1,341.5kg/m2)
- Wing Area 9.4ft2 (0.9m2)
- Drag Points 651
Parts
- Number of Parts 63
- Control Surfaces 0
- Performance Cost 304
@EternalDarkness ok, my bad
@Mobius1Cyka you have been issued a strike for inappropriate and curse-filled comment on Planebuilder1010's post. If you have a problem with a post, tag a moderator and explain your problem.
@Amazjul ok ill se if i can do that before i post it. Also, i have upvoted all your posts like i said on the description. Again, thanks a lot!
Uploaded a mostly fixed version. I don’t have access to the correct parts as I’m on mobile however I would just replace the 2 blocks on the front wheels with one complete axle so they’re perfectly aligned.
I think the issue is because of the taper on the front nose cone, one side will always be 1/2 a square unaligned with the other side. As I said, a complete axle would cure that.
@Amazjul wow thanks! If you havent posted it already, please post it, i dont care if it looks rubish and i so only have mobile. Thanks again!
Ok so I was able to find a few things.
1. When I clicked mirror R side to L side, both wheels on the L side detached. I’m not sure if that is anything related, but it happened.
I was able to get the car to drive straight. I did several things that didn’t help first, like change wheel sizes, traction amounts, engine/wheel directions, horsepower, a number of things. Nothing.
The way I cured it (and unfortunately I only have mobile so it looks rubbish, that’s why I don’t want to upload it) was to remove the rear shocks and attachments and use one square block on the body and connected the wheels to that. It worked straight away. I don’t know why, but that cured the issue 100% even with a 600hp motor.
@ErickvCamilo i have checked that stuff on the wheels, the camber/tilt is the same in every side (-2.5 degrees in the front and -0.5 in the back). Also tried increasing the jets power output and lowered the ride height, it did not work.
@ErickvCamilo i think i did that, but i night not have saved. Ill check it out.
The wheels when mirrored do not change tilt
You have to change the tilt of the wheels on the other side whenever you mirror
I'll try to fix