Profile image

I need some tips on how to make my plane more stable

34.5k Hayhayjam664  6.5 years ago

I had it flying well 10 mins ago until i added the inlets in the wings the wings are set to flat bottom and there is a slight weight in the rear and i cant figure it out any tips?

General Characteristics

  • Successors 1 airplane(s)
  • Created On iOS
  • Wingspan 30.5ft (9.3m)
  • Length 27.8ft (8.5m)
  • Height 11.8ft (3.6m)
  • Empty Weight 6,393lbs (2,900kg)
  • Loaded Weight 8,221lbs (3,729kg)

Performance

  • Power/Weight Ratio 2.05
  • Horse Power/Weight Ratio 0.243
  • Wing Loading 32.0lbs/ft2 (156.4kg/m2)
  • Wing Area 256.7ft2 (23.9m2)
  • Drag Points 5282

Parts

  • Number of Parts 86
  • Control Surfaces 6
  • Performance Cost 396
  • Log in to leave a comment
  • Profile image
    1,326 THEOKPILOT

    I need help with my plane too. I am making a TBD Devastator and it has poor directional stabilty at speeds lower than 110 mph. This has never happened on any of my other builds. Also the virtical stavilizer is bigger than most.

    2 months ago
  • Profile image
    215 miloeid14

    Dont use jet Engine and prop at The same time

    8 months ago
  • Profile image
    34.5k Hayhayjam664

    Thank you! :D @CarsonG1017 @FGW2014 @Chancey21 @ZHUAREVONI

    Also I have it fly much better now here

    +1 6.5 years ago
  • Profile image
    31.2k SlimSimpy

    @Chancey21 yes, when built to a huge size and scaled down, it acts the same

    6.5 years ago
  • Profile image
    31.6k VenusLancer

    add wing parts into the fuselage (without fuel if goes in the tail)

    6.5 years ago
  • Profile image
    69.4k Chancey21

    Does a wing with less size act the same?@FGW2014

    6.5 years ago
  • Profile image
    69.4k Chancey21

    I always triple up my vertical stabilizers to make my planes more maneuverable and move the COM further back to make it a more well balanced aircraft rather than shoving a bunch of dead weight in the front

    6.5 years ago
  • Profile image
    31.2k SlimSimpy

    First, i use the mod Fine Tuner, it allows you to size blocks, you can make the wings really big, by scaling them normally, then open the fine tuner icon at the bottom of your screen, uncheck the box at says scale mass, then just scale them by half in all sections, it will make the wings look small when in reality they are big, giving more stability and lift at the same time. See if that will work.

    6.5 years ago
  • Profile image
    9,673 CarsonG1017

    You can make it more stable by making it less wobbly.

    +1 6.5 years ago
  • Profile image
    34.5k Hayhayjam664

    Thank you all for the tips! :D @AnOlympicWalnut @MrDoolittle @Vuki11

    Here

    6.5 years ago
  • Profile image

    My suggestions are to add more rudders, move the COL further to the back, and maybe add some more power. Remember that the centers (COL, COW, and COT) are key to an aircraft.

    +2 6.5 years ago
  • Profile image
    8,340 MrDoolittle

    Lose the weight in the rear

    6.5 years ago
  • Profile image
    6,320 Vuki11

    Put more stabilizers inside the plane and it will be more stable

    +2 6.5 years ago