Profile image

P51/Mustang (NA-91)

50.7k ChaMikey  8.7 years ago

The P51 Mustang or better known as Mustang MK I A in the RAF, was a WWII fighter and the first of the mustang family. It was first based on the A-36 Apache attacker/fighter until an agreement with the RAF to name it Mustang. It is equipped with 4x 20mm Hispano cannons, 2 on each wing with 125 RPG.

credits to @Thealban for his Roundel

vtol up for front landing gear and G for the rear landing gear.

to take off, push throttle full until the nose pitches and immediately pitch up to prevent the nose pitching downwards.

to land, you are to decrease speed to 100mph below for an easy landing and keep the nose up while doing so.

i hope you all enjoy it as i did finishing it!

Spotlights

  • This craft has been featured

General Characteristics

  • Created On Mac
  • Wingspan 41.8ft (12.8m)
  • Length 39.1ft (11.9m)
  • Height 17.0ft (5.2m)
  • Empty Weight 15,922lbs (7,222kg)
  • Loaded Weight 21,045lbs (9,546kg)

Performance

  • Horse Power/Weight Ratio 0.142
  • Wing Loading 36.1lbs/ft2 (176.0kg/m2)
  • Wing Area 583.7ft2 (54.2m2)
  • Drag Points 7158

Parts

  • Number of Parts 167
  • Control Surfaces 8
  • Performance Cost 619
  • Log in to leave a comment
  • Profile image
    50.7k ChaMikey

    @SimpleName11 thank you!!

    8.7 years ago
  • Profile image

    Awesome Detailed Plane!!

    8.7 years ago
  • Profile image

    :) @ChaMikey

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @Hadesrocksz thanks! :D best monday ever!

    8.7 years ago
  • Profile image

    Congratulations on the feature!

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    can't believe this is actually featured :') thank you all!

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @DeezDucks whoa! can't wait to see it!

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @FrogmasterAereonautics i don't think this needs to be lol, just another creation :P thanks anyways!

    8.7 years ago
  • Profile image
    Mod DeezDucks

    This compares to the one I'm making right now!

    8.7 years ago
  • Profile image

    I personally think that these models need a feature.. @AndrewGarrison @KevinMurphy we need your judgement!

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @VernalTie513 thank you!

    8.7 years ago
  • Profile image
    20.4k VernalTie513

    Amazing :O

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @MaleticAirplanes i'll try doing that soon. yeah i didn't use the nose fuselage because i thought it looked better :p and thank you! i hope i will!

    8.7 years ago
  • Profile image

    @ChaMikey try making it shorter and tilting it forward. That has to work. It worked on all of my planes with a tailweel. And you could add fusulage nose section to the wingtips to round them up. You have a lot of potential, I want to see you reaching gold soon.

    8.7 years ago
  • Profile image
    17.2k TemDesBur

    @ChaMikey np! its a great model

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @MaleticAirplanes yeah i made it short before deciding to increase the length, if it was shorter the nose would instantly dive to the runway. Thank you for the feedback!

    8.7 years ago
  • Profile image

    Your main landing gear is, I believe, a bit too long. That's why it pitches down on the runway. Besides that, a beautiful model.

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @TempestAviation @MaleticAirplanes thanks guys!

    8.7 years ago
  • Profile image
    50.7k ChaMikey

    @MrSilverWolf that was fast, Thank you!

    8.7 years ago