Mi-26
Lifting the world's most serial Mi-26 on technical and economic parameters has no equal. Helicopters of this type are unique in their transportation capacity and are used for transferring airborne mobile units, including large-size equipment. Mi-26 is designed to perform a variety of tasks -. Transportation, evacuation, fire fighting, etc. The Mi-26 can carry up to 82 paratroopers with a full complement of weapons, or up to 20 tons of cargo inside the fuselage or on external sling.
Control:
1 AG - activates the control of the helicopter, namely the change step (VTOL up for a comfortable flight to raise enough to 1.5 points), the roll control (Roll) / pitch (Pitch) / trip ticket direction (Yaw), tilt rotor (Throttle ) and engine start (Throttle).
2 AG - responsible for opening the hatch (VTOL up to the stop).
To take off you need to:
Activate the first group
Squeeze Throttle 60% (so the screw will be parallel to the ground)
Raise Vtol 1.5 division
For taxiing on the ground need to:
Activate the first group
Squeeze Throttle 100%
Raise Vtol 0.5 division
To go to the high-speed mode (. 70mph .___) need:
After take-off squeeze Throttle up to 100% (the maximum forward tilt screw)
Raise until it stops Vtol
Keep the pitch 15 degrees
To land the helicopter should be:
Lower Throttle up to 60%
Lower Vtol to 1 division
Keep pitch +4.5 degrees
The screw can cut the tail boom, if you pull the joystick on the zero step and the minimum slope of the screw.
The helicopter can carry cargo weighing up to 44,000 lbs (20 tons) .If installation of cargo in the cargo compartment is important rasspolozhena his center of gravity, otherwise it will roll in one of the sides.
I want to say thank IntexAF for help in solving a problem due to which the release of the Mi-26 was deposited for two months.