Profile image

MOJO-2Stroke_PistonGLider

2,911 mojoyup  6.0 years ago

Took a break on the C-20 and did something with piston power again(I'm hooked!) lol. Anyhow, behold the PistonPlane! The piston layout is based on a real 4cyl DOHC configuration for a single stroke. It works flawless in game! I made a full 4cyl but it started getting GPU hungry :P. So I made this! Use the engine however you want, and if you want to credit I thank you :) Play around with the plane construction also, as it is very sensitive to movement due to the use of very light materials - even though it is still over 3 tons haha!

CONTROLS:
Pistons: Throttle up
Standard WSAD flight and Yaw

Pitch controls the angle of the blades, but if the plane starts backwards, hit b and throttle again, etc. Itll pick up quick, mainly due to the fact that wingspan is longer than the length of 4 standard size ranch homes! Its a biggy :)

Can glide-land at the right altitudes, and speed maxes at a whopping 30+mph lol. Its relaxing though :)

Questions, comments welcome!

P.S. blowups have occured. Try reducing prop length below 6 and/or removing the middle bar so you can turn without them hitting each other lol. It was an overnight experiment so its not perfect..yet...muahahaha!

General Characteristics

  • Created On Windows
  • Wingspan 172.4ft (52.5m)
  • Length 125.0ft (38.1m)
  • Height 39.0ft (11.9m)
  • Empty Weight 6,264lbs (2,841kg)
  • Loaded Weight 6,264lbs (2,841kg)

Performance

  • Wing Loading 1.0lbs/ft2 (4.7kg/m2)
  • Wing Area 6,511.8ft2 (605.0m2)
  • Drag Points 50430

Parts

  • Number of Parts 102
  • Control Surfaces 5
  • Performance Cost 730
  • Log in to leave a comment
  • Profile image
    2,911 mojoyup

    @parakeetaeronautics Did you change the props length or middle section and get it in the air still? Hope all is well!

    6.0 years ago
  • Profile image
    2,911 mojoyup

    @marcox43 Very possible :)

    6.0 years ago
  • Profile image
    23.4k marcox43

    I think I saw this thing flying on the MP yesterday...

    +1 6.0 years ago
  • Profile image
    2,911 mojoyup

    @parakeetaeronautics lol Yeah its something of a mistery :P Id likely believe it is how close the props are to to the middle support/themselves. They are currently set at 6 I believe, but making them a bit shorter I do not believe will cause it not to fly so try that out :) Just wanted to test how long I could make them :P Oh, or removing the middle bar would prob work too, and its likely mainly when its turning due to the size versus weight. Hope that helps!

    6.0 years ago
  • Profile image

    It sometimes randomly blows up when I’m flying it

    6.0 years ago