[ ! ] Required mod: NathanMikeska - Smoke Trails. If you want to download but do not have mods, download normally, then undo, and finally redo.

SCALE 1:~6 (LxBxH // 1.8x1.2x0.7 ft)
MASS SCALE 1:~300 (~22lbs // ~10kg)

Probably the first of its kind... let me know if anyone did it before me

Note: the "true front" is the side with the interface, the "in-game front" is where the canister is located.

LES (division of Llama/LHI) now has a new smoke / fog machine design. It produces a dense vapor-based fog via 'heated' methods and releases it with the primary fan on the top. This means that there is no need for a propellant.

The system uses a water-glycol mixture. The canister is stored to the right of the vapor system, where it is held in place by clamps and fed into the vapor system. The canister used is a specific size that only works with this series of machines.

The user interface is simple to use. It comprises of:
- 3 main status lights - power, fan, smoke
- air outlet OK light
- canister connection OK light
- digital screen*
- interface buttons* - up, down, yes, no/back
- power button*
The machine can also be computer controlled. This requires a cable to be connected to the port above the screen. The port is covered to be protected by default, but the cover piece can be removed.

It is powered by an external power source. A cable that works with the machine's power port is provided with purchase.

Set now available for under $1,000! This comes with ONE filled specialized canister for this machine.

Oh, and apparently the SP release is powered by M A G I C

--- USER MANUAL ---

CONTROLS:
AG8+Throttle - Smoke Density
AG8 - Power
SYSTEM WORKS WITH AI

PRO TIPS:
- adjust the piston speed to modify smoke density
- adjust the smoke pod settings for a different feel
The current settings provide a good density and do not end up in a glowing mass.

XML MODDING EXAMPLE: the use of the 'zeroOnDeactivate' parameter under 'inputController' on the engines allows for them to stop when AG8 is turned off.

XML MODDING EXAMPLE: the engines have been set to a max input of 0.1, meaning they only reach up to 10% throttle and thus produce much less sound.

The part count can probably be reduced by over 20. This is because of multi-part placement to mark separate sections of the machine, as well as to overcome part snap issues.

--- End USER MANUAL ---