Full video here.

The TBV 100 (Thruster-Based VTOL, 100,000 lbs) is the flight module from my TIE Fighter, with some improvements.

• VTOL capability.
• Trimmed for level flight at full throttle, but can fly level all the way down to about 420 mph with full up-trim.
• Superb maneuverability.
• Excellent yaw response with zero yaw-induced roll.
• Handling precise enough to fly through the Maywar temple complex at over 1000 mph.

Controls

• Custom camera 1 for cockpit view.
• AG1 for afterburner.
• AG2 enables VTOL mode.
• In VTOL mode, push the VTOL slider up to rise; down to descend.
• Brake to decelerate.
• Other flight controls are normal.

Requirements for using in your own builds

• Make sure the build is made entirely out of zero-mass parts (the total mass of the build must be zero).
• The build must not have any wings or functional engines (cosmetic engines with powerMultiplier="0" are ok).
• The total drag of your build will determine the acceleration and top speed. Keep it close to the drag of the flight module for best results.
• The build must be large enough to contain the module (duh).

How to install

• Remove the crosshair subassembly by detaching the stubby cylinder at the front.
• Detach the flight module from the cockpit by dragging away the matte-silver cylinder, and create a subassembly from it. The matte-silver cylinder is the central part of the flight module to which all other parts are attached, so it's the only part you must use to handle the module.
• Attach the subassembly to your build via the silver cylinder and nudge it inside.

Making your build a successor is not required. Gentlemen will give credit.