Throttle on to spin paddles
VTOL for up/down
Yaw/Pitch/Roll for Yaw/Pitch/Roll
Thought I would try making a cyclogyro. The swash plate system works properly but the paddles don't produce enough lift on their own so I attatched VTOL jets on the tips, I also used a blasto jet on the inside to lighten the aircraft a little for added responsiveness. I used funky trees on a gyro to keep the nose in the wind above 15 kts. Group 8 activates another gyro for stability, but it flies alright without it if you have a sready thumb. hope you enjoy!
Specifications
Spotlights
- SemedianIndustries 4.8 years ago
- BuiltBionixInd10 4.8 years ago
General Characteristics
- Created On iOS
- Wingspan 25.9ft (7.9m)
- Length 33.1ft (10.1m)
- Height 17.9ft (5.5m)
- Empty Weight N/A
- Loaded Weight 3,833lbs (1,738kg)
Performance
- Power/Weight Ratio 7.914
- Wing Loading 5.1lbs/ft2 (25.1kg/m2)
- Wing Area 746.7ft2 (69.4m2)
- Drag Points 1514
Parts
- Number of Parts 204
- Control Surfaces 0
- Performance Cost 1,256
@Thorne Roger
One more thing I should mention lol, I would also recommend keeping it light because I would like to try and get the wings to produce the lift so that’s it’s a little more of a true cyclogyro @SemedianIndustries
@Thorne it's a plan then
If it’s an airliner, we could both post our own with our own fictional airline paint job at the same time @SemedianIndustries
An airliner would be cool, anything would be cool actually lol @SemedianIndustries
@Thorne Roger that
Just leave cylinders where you want me to put the paddles too! @SemedianIndustries
@Thorne airliner?
No problem! Just tag me in a private upload when you’re done! We can sort out the finer details as we go, I’m busy with school as well @SemedianIndustries
@Thorne might take a while, as I'm at the academy for the week
@Thorne
YES
@SemedianIndustries Want to collaborate on the first attack-cyclogyro? You could design a body, and I could do the mechanism and cockpit after you finish
What the magic is soo cool
I ran into it online and couldn’t resist lol @SemedianIndustries
and here I thought making an ornithopter was the craziest thing
@Thorne thank you for taking it nicely
lol, I see that too now that you mention it @Rickyjasper2
It's like the petersripol chicken bucket plane