Always a great pleasure to get a comment like that from you @AndrewGarrison . It takes a far bit of patience when using a mobile device, and a good app for editing XML with, I use the paid version of Turbo Editor and it works a treat. Also finding the parts I want to edit is easy if I just use the default pink in the custom paint to locate parts with material="13" in my code.
Thanks @WalrusAircraft glad Walrus Jr enjoyed it, I will see the B-52 fly again soon I hope, just don't cross the border in my airspace, I have a twitchy trigger finger!
I'll have a look at your rockets @Rohan, I'm looking for small but powered, but I might have to either wait for smaller rockets or use the VTOL thrusters and a VTOL engine that activates to keep them flying, then adding in surfaces and removing all regular surfaces from the main plane should be easy.
This is fun. I broke the wheel on the airport but that was probably my fault for not putting high physics on. I love the shape, looks like a wheeler from Return to Oz.
@WalrusAircraft Yeah, that's good. I better hold off posting it until the next update, each engine is approximately 11000hp right now, if there is a fix for the structural panels then I might end up with an A400M that goes 2000 mph and loops. Not long now though.
@WalrusAircraft It's ready, I'm worried if I releas it the props will be changed and make it unflyable. I'm also having some difficulty understanding the drag affects with structural panels, they really slow the plane down and I have to boost the prop hp to compensate.
@nickasaurusrex I don't like the big blue flame, the mods were smart to make sure they didn't look good modded. I have another idea to get more power without the flame though so will show case it on my next jet.
@Stingray I haven't found a picture of one extended yet. Can you describe to me what it looks like? I assume the piece behind the radome is the arm? Question is does the radome stay level like it is now or in line with the arm?
@Farscyt That would be my dream. I've never seen one of these in real life and probably never will. They must be beautiful to behold even just for their sheer size alone.
@JMicah4 Three long fuselage sections, the middle one is raised on the bottom to create the bomb section. The gap covered with wings connected to detachers. The new fuselage part really helps to shape the bird.
@AlphaOneIndustries Looks like you need one of those floppy up covers on your activator switches to stop accidentally knocking..."hmm, I wonder what this big red button does!"
@IMDABEST This is more really a proof of concept as I've been waiting to try the new prop has heli rotors for a while since hearing about their adjustability. It doesn't fly well but I think it's the right direction for any new helicopters to be built.
@WalrusAircraft I can image it would also be possible to make a hollow aircraft using fuselage blocks to shape the walls, I will be testing that later to possibly replace on my A400M.
@WalrusAircraft The problem with the fuselage parts is ultimately they are still blocks, they have set edges but they're still cuboid. Making a large fuselage round can be done but need to be done with several addition fuselage sections. One main one down the middle and several on the side to shape it and make it seem more round. That said, my solution for a bomb bay is to have three main fuselage sections side by side and to cave out a section in the bottom of the main section which I can later cover with doors like so: http://imgur.com/MYD5usi
@JShay Cheers mate
Thanks @nickasaurusrex
Thanks @Geebers
Always a great pleasure to get a comment like that from you @AndrewGarrison . It takes a far bit of patience when using a mobile device, and a good app for editing XML with, I use the paid version of Turbo Editor and it works a treat. Also finding the parts I want to edit is easy if I just use the default pink in the custom paint to locate parts with material="13" in my code.
Thanks @JacobHardy64
Thanks @WalrusAircraft glad Walrus Jr enjoyed it, I will see the B-52 fly again soon I hope, just don't cross the border in my airspace, I have a twitchy trigger finger!
I'll have a look at your rockets @Rohan, I'm looking for small but powered, but I might have to either wait for smaller rockets or use the VTOL thrusters and a VTOL engine that activates to keep them flying, then adding in surfaces and removing all regular surfaces from the main plane should be easy.
Thanks @LukeDaDuke , glad you like it
Thanks for the vote @Johawks1976 , some feedback on the off'ness would be appreciated so I can look into it
Thanks @Jmicah4
Cheers @jimbojet , love your builds by the way, really fun, I need to rate more of them
Thanks @Allstarship
Some homework for you then @WeeBabySeamus
Thanks @ramjet
Great idea, will the SLAVE 1 count?! :)
That looks awesome.
Looks good.
This is fun. I broke the wheel on the airport but that was probably my fault for not putting high physics on. I love the shape, looks like a wheeler from Return to Oz.
@WalrusAircraft Yeah, that's good. I better hold off posting it until the next update, each engine is approximately 11000hp right now, if there is a fix for the structural panels then I might end up with an A400M that goes 2000 mph and loops. Not long now though.
@WalrusAircraft It's ready, I'm worried if I releas it the props will be changed and make it unflyable. I'm also having some difficulty understanding the drag affects with structural panels, they really slow the plane down and I have to boost the prop hp to compensate.
It's not an easy plane to replicate, especially the angle of the wing. This looks spot in to me.
@jheffernan No problem at all.
Absolutely amazing mate, fantastic build. Supper accurate, enjoyable to fly and the bomb bay is perfect.
Really cool, I like it
Bloody superb.
Looks and flights great.
Brill
@Kevpilot @WeeBabySeamus made an amazing F-15, I don't think I could better it.
@nickasaurusrex I don't like the big blue flame, the mods were smart to make sure they didn't look good modded. I have another idea to get more power without the flame though so will show case it on my next jet.
Nice
Nice work
@Stingray I haven't found a picture of one extended yet. Can you describe to me what it looks like? I assume the piece behind the radome is the arm? Question is does the radome stay level like it is now or in line with the arm?
Looking good
@AndrewGarrison lmfao
Nice work
Very colourful and very big. Great work. Sorry, can't fly it yet though as it;s too big for mobile and I don't have beta on my Mac.
Great plane, I especially loved the story. Near death experience.
@Farscyt That would be my dream. I've never seen one of these in real life and probably never will. They must be beautiful to behold even just for their sheer size alone.
@JMicah4 Three long fuselage sections, the middle one is raised on the bottom to create the bomb section. The gap covered with wings connected to detachers. The new fuselage part really helps to shape the bird.
@Kevpilot @Griffith Andrew and the team are working really hard on getting the love version out before the end of the month, it won't be long.
@AlphaOneIndustries Looks like you need one of those floppy up covers on your activator switches to stop accidentally knocking..."hmm, I wonder what this big red button does!"
Awesome
@IMDABEST This is more really a proof of concept as I've been waiting to try the new prop has heli rotors for a while since hearing about their adjustability. It doesn't fly well but I think it's the right direction for any new helicopters to be built.
Bombs away!
Excellent plane, the profiles are perfect and it flies good too.
@WalrusAircraft I can image it would also be possible to make a hollow aircraft using fuselage blocks to shape the walls, I will be testing that later to possibly replace on my A400M.
@WalrusAircraft The problem with the fuselage parts is ultimately they are still blocks, they have set edges but they're still cuboid. Making a large fuselage round can be done but need to be done with several addition fuselage sections. One main one down the middle and several on the side to shape it and make it seem more round. That said, my solution for a bomb bay is to have three main fuselage sections side by side and to cave out a section in the bottom of the main section which I can later cover with doors like so: http://imgur.com/MYD5usi
Cool
Perfect shape, just needs some windows now.
@IMDABEST What beta version are you using? @AndrewGarrison Problems downloading a beta plane on a beta release?