@Mobius1Cyka I know. This is a "replica" of old Churchill 1(base) & Churchill gun carrier +300mm cannon. This is my vision of what could be if in the 1940s they would put such a gun on a tank. I did not set myself the task of creating a modern MBT
Good chassis, but I do not make replicas... Try to create a body from simple fuselage blocks. On top of the chassis. Then transfer this body to the chassis
Make another lift engine. And bind it to Trim or another key. To takeoff a little above the surface. this function is needed when hover meets a high obstacle(mountain)
little remark: In real models of the suspension, sometimes, there is a "drive unit" from the engine to the wheel. In this case, the spring interferes with this process. It must be displaced or removed outside the suspension arm
@Shnippy Thanks!
I originally wanted to put there 150mm cannon. And he almost did a backflip =D But it was too tough... counterbalance the rear with a counterweight - he was drowning. I had to put a small but armor-penetration cannon
@SkippyTheEngineer Ok i will try to create something body for rally... But I can’t promise that I will be able to create something "very great" ¯_ (ツ) _/¯
@samecnikita41
Work a little with the sound. The voice is heard weakly. But the noise in the background is clearly audible
@samecnikita41 Cool!
Are you a blogger?
@TheResistancedude thanks!
@Biscool he has a successor
https://www.simpleplanes.com/a/s1y85n/tank-T-12A
@Biscool thanks! :)
@TheResistancedude "mission complete"(^_^)
@TheResistancedude To what extent can I change airplane?
@TheResistancedude well, i will try to do something
excellent minimalism
a small instruction on how to make vertical aiming for this tank
https://www.simpleplanes.com/a/1R9H14/Tank-2-5-gun-setting-read-Description
@samecnikita41 reload or not - it's your choice. You can take this error into account, and upgrade this 2.5 tank to tank 3.0
it is not so bad. But because of this, there is no vertical aiming of the cannon
@samecnikita41 Inside the tower, some elements of the cannons are not fixed(1rotator). Or fixed... But fixed to the wrong parts of the tower
do you have "attachment editor"? This is a button with a "electrical socket" icon(tap to "rotate part" button)
Already better. Keep it up, dude!
@4rsh1 sometimes I don’t understand what is going on
slight disorientation: where is the top and where is the bottom? But still very good
@4rsh1 (^_^)
@samecnikita41 everything is fine. There is still time to learn to do better ;)
Can i modify this tank?
@Shnippy ok. I attached a link to the description
but it holds the wing
@Shnippy lol. Yes, it's very flex wood! :-D
@Shnippy thank you =)
@Mobius1Cyka Here you will see many of my very strange tanks :D
@Mobius1Cyka I know. This is a "replica" of old Churchill 1(base) & Churchill gun carrier +300mm cannon. This is my vision of what could be if in the 1940s they would put such a gun on a tank. I did not set myself the task of creating a modern MBT
@Mobius1Cyka Yes it's big, but the tank crew there can stand at full height
Good chassis, but I do not make replicas... Try to create a body from simple fuselage blocks. On top of the chassis. Then transfer this body to the chassis
@demonicdogedogg Awesome!
Make another lift engine. And bind it to Trim or another key. To takeoff a little above the surface. this function is needed when hover meets a high obstacle(mountain)
@samecnikita41 ok
@SkippyTheEngineer Exactly!
little remark: In real models of the suspension, sometimes, there is a "drive unit" from the engine to the wheel. In this case, the spring interferes with this process. It must be displaced or removed outside the suspension arm
@SkippyTheEngineer I already have a finished body this APC: https://www.simpleplanes.com/a/zyb8S1/APC-wheeled-tank-work-in-progress
@SkippyTheEngineer it's just a scale model. It is made in order not to go beyond the chassis.
@NinjaPro thanks!
@SkippyTheEngineer yes, you can remove some functions. No problem :)
@Shnippy Thanks!
I originally wanted to put there 150mm cannon. And he almost did a backflip =D But it was too tough... counterbalance the rear with a counterweight - he was drowning. I had to put a small but armor-penetration cannon
@SkippyTheEngineer Ok i will try to create something body for rally... But I can’t promise that I will be able to create something "very great" ¯_ (ツ) _/¯
@SkippyTheEngineer I agree with you
@SkippyTheEngineer i understand you. My crafts are (mostly) designed with tablet pc(WinMobile). Sometimes i have to simplify some details very much
@SkippyTheEngineer thanks!
For what purpose is the small engine at the rear?
it's really micro... I have too "wooden" hands for such small models. Sorry, i can't help you with the creation of the exterior
@Shnippy and for you Thank, also for your upvotes and a follow.
lol. Good landmine
@ApplejuiceYT2 lol. Nice try =D
I didn’t do decoration, as lags are already beginning to be present