Wtf didn't notice your Vanguard has a BEA livery too :D I just liked the plane. As for my 1-11, I had to choose BEA because adding parts to the bottom ( for painting ) would cause Landing Gear problems. So I had ro take BEA bec. they had no paint at the bottom fuselage.Thx again for your like and support, if u wish, you could follow me, if you dont wanna miss any new creations. My next project will be a Trident ;)@Tang0five
Nice plane, the engines and the landing gear are a bit small though.The engines are a bit too close to the fuselage, but otherwise... as I said great plane !
My One-Eleven is nearly done, and my next build is going to be the ”bigger brother “of the One-Eleven: The One–Eleven Trident ( u know , this 3 Engine aircraft that looks like a mix between a 727 and One-Eleven ).Btw, I nearly stopped working on my 727 bec. I thought it was too big ( it’s bigger than a A380 due to the cockpit ), but I will continue until either my PC dies or It‘s finished, :p
Ok nice! Btw, I watched all the videos of this guy ( absolutely love them ) ;) Another funfact: This is also where my Convair 990 comes from ! And my Dassault Mercure too ! :p That simply bec. before watching his videos, I didn't even know they existed, and now, they are some of my favourite airliners. @F4Mustang
Btw love your Super Conny ! And funfact: Did you know, that the Super Constellation was ( at her service time ) called " The best 3 engine aircraft in the world ". Because in almost every flight between Europe and the US, one of her four powerful Wright R-3350 engines failed!
Ok thx, btw overload shouldn't be a problem for your phone, but it's your decision. ;). After finishing my 727, I will probably try again to make a 747.But until that time, be prepar3d for some other smaller aircrafts I make, to be able to continuously upload creations without someone having to wait like 700 years for the next build ( 727 ).@F4Mustang
@F4Mustang Thx, I can`t describe how happy I am to hear that :).Btw,I am working right now on a british One-Eleven ( which is btw. one of my favourite planes ), to compensate the long time it takes for my 727. Btw if u are interested in plane I could recommend you a video about a real event, that happened in 1990 and even inspired me to build a 1-11. The video if u are interested : https://www.dailymotion.com/video/x19jxa7
Hey, great plane! Btw. I have a tip for u to make it even better!. If u are using Overload, just select all parts of the gear and put them more into the fuselage.Then u select the rotator, and set rotation to 120 instead of 90.Finally select all parts of the landing gear and search for ´´disable aircraft collisions´´ in the fuselage part section, and change it from "false " to "true".By doing this u can retract the gear without any problems into the fuselage, without anyone seeing the rotators.But again great build,u definitively deserve more points. ( btw I can`t really do anything on SP bec. my hand hurts so it will take longer. I have tenosynovitis in my right hand and even typing is painful ;_; ) In case u are wondering.
@THEPLAY3R001 , thank you very much for your support; I am happy that some people like my Comet.Btw there is a far better version of my plane ( update ). If you like, I can upload it. Just tell me ! :D
@F4Mustang Hey, I am working on the nose right now, until now everything looks great but the downside is that the cockpit alone is as big as most of my airliners :D
Looks more like a Lockheed Electra ( u know the 2 engine plane, not the L-188 )but ok.
+1I could help you, but it will take a couple of hours since I am not at home right now.@Chingonito
My favourite of all ur planes! Keep up the great work and you will be silver in no time! ( Did "Dunkirk" inspire you to build this one ? ) :D
Like your builds! You make really cool planes for a more or less new "player"!
Really good!
+1Thank you very much for your support! :D
@belugasub
@TMach5
@THEPLAY3R001
@Falcon2456 Thank you very much!
PLEASE READ THE DESCRIPTION.Btw, updates will be released in the future.Have a good flight and a good day!
@Genius01 thank you very much, really appreciate it!
Nice work dude!. As soon, as I finished my Tu-124, I will definitely download it; u deserve many more points on this creation !
@Tang0five Thank you very much for your support! Love your planes too!
Wow! This thing definitively deseves more attention!
Wtf didn't notice your Vanguard has a BEA livery too :D I just liked the plane. As for my 1-11, I had to choose BEA because adding parts to the bottom ( for painting ) would cause Landing Gear problems. So I had ro take BEA bec. they had no paint at the bottom fuselage.Thx again for your like and support, if u wish, you could follow me, if you dont wanna miss any new creations. My next project will be a Trident ;)@Tang0five
Absolutely nice plane! I m a fan of the real 707 too
Wow, nice plane! ( in fact, all your creations are well done ! ). I made a 1-11 too, but it isn`t as good looking as yours! ( sry for my bad eng. )
Keep up the great work, and you will be silver in no time! ( I cansee great potential in your builds )
Very nice plane, although it has some steering problems.But again, ( regarding the fact, that it is the second plane you uploaded ), its very good!
Thx @THEPLAY3R001 and @F4Mustang
@ItsGamerzXYT As I said, unfortunately, you have to takeoff with full flaps, trim and elevator up
Nice plane, for the first upload!
@F4Mustang Hi,pls tell me how you got the in-game footage to SP.Would be very helpful, thx in advance! :D
@VerldVarIII Cool, one of my favourite planes!
+1Nice, helicopter!
+1Nice plane, the engines and the landing gear are a bit small though.The engines are a bit too close to the fuselage, but otherwise... as I said great plane !
Btw, just thought about doing a remake of my L-188 Electra, what do you think ?@F4Mustang
Nice plane; btw. love the 737-200 and 100 series
Thx @F4Mustang
My One-Eleven is nearly done, and my next build is going to be the ”bigger brother “of the One-Eleven: The One–Eleven Trident ( u know , this 3 Engine aircraft that looks like a mix between a 727 and One-Eleven ).Btw, I nearly stopped working on my 727 bec. I thought it was too big ( it’s bigger than a A380 due to the cockpit ), but I will continue until either my PC dies or It‘s finished, :p
Hey, nice build again! Probably, I am going to make a DC-10 (based on my DC-10 engine ), after my One-Eleven.
Hey, great plane! Love it! Just one question: may I use your P3 cockpit for my BAC One Eleven? Thx
Ok nice! Btw, I watched all the videos of this guy ( absolutely love them ) ;) Another funfact: This is also where my Convair 990 comes from ! And my Dassault Mercure too ! :p That simply bec. before watching his videos, I didn't even know they existed, and now, they are some of my favourite airliners. @F4Mustang
Btw, in case you didn't know what to build next, a Lockheed L-188 Electra or a L-1011 Tristar would be great too! :D @F4Mustang
Btw love your Super Conny ! And funfact: Did you know, that the Super Constellation was ( at her service time ) called " The best 3 engine aircraft in the world ". Because in almost every flight between Europe and the US, one of her four powerful Wright R-3350 engines failed!
Ok thx, btw overload shouldn't be a problem for your phone, but it's your decision. ;). After finishing my 727, I will probably try again to make a 747.But until that time, be prepar3d for some other smaller aircrafts I make, to be able to continuously upload creations without someone having to wait like 700 years for the next build ( 727 ).@F4Mustang
@F4Mustang Thx, I can`t describe how happy I am to hear that :).Btw,I am working right now on a british One-Eleven ( which is btw. one of my favourite planes ), to compensate the long time it takes for my 727. Btw if u are interested in plane I could recommend you a video about a real event, that happened in 1990 and even inspired me to build a 1-11. The video if u are interested : https://www.dailymotion.com/video/x19jxa7
Hey, great plane! Btw. I have a tip for u to make it even better!. If u are using Overload, just select all parts of the gear and put them more into the fuselage.Then u select the rotator, and set rotation to 120 instead of 90.Finally select all parts of the landing gear and search for ´´disable aircraft collisions´´ in the fuselage part section, and change it from "false " to "true".By doing this u can retract the gear without any problems into the fuselage, without anyone seeing the rotators.But again great build,u definitively deserve more points. ( btw I can`t really do anything on SP bec. my hand hurts so it will take longer. I have tenosynovitis in my right hand and even typing is painful ;_; ) In case u are wondering.
+1Yeah np, but its going to take a while ( can't work as fast as usual, sice my right arm is injured) xD @F4Mustang
I'm having some problems, but the work continues slowly but surly! :)@F4Mustang
Btw thx for Spotlighting although it isn't finished@Stormfur
Np I will do one when I finished the Boeing 727@Stormfur
@THEPLAY3R001 , thank you very much for your support; I am happy that some people like my Comet.Btw there is a far better version of my plane ( update ). If you like, I can upload it. Just tell me ! :D
XD@Roadrunner232
+1@F4Mustang yeah I want to make the APU panel too ( on the right side near the cockpit door )
Ok nice to hear; is there anything to do better, if yes pls tell me!@F4Mustang
Thank you @SakuraSaku
@F4Mustang Yeah this is going to be a mega build
@F4Mustang pls KILL ME NOW !!!!!!!! ( oh god this is taking forever to finish
@F4Mustang the cockpit alone has an empty weight of 35000lbs
@F4Mustang Hey, I am working on the nose right now, until now everything looks great but the downside is that the cockpit alone is as big as most of my airliners :D
many thanks to @TripleAAirlinesCO, and @Kweed10, @DPSAircraftManufacturer and @ayou2005 for spotlighting this post!
+1