@TheBigEgg You may use it but you need to use the modified engine found in the passenger area sealing or it will tare it self apart, I would recommend using the rotor from my eurocopter tiger it is easier to work with.
@TTHHSSSS actually I am working on a K-max rotor prototype as a side project, when it it's not exploding it flies reasonably well, it needs a lot more trial and error.
@Supercraft888 thank you for the compliment, first of all what did you mean by "Cale" if it's scale I use the FINE TUNER mod another useful mod is OVERLOAD.
Hello, where do I start? there are small vtol nozzles at the end of the rotor blades the blades are made of wings and there are rotators at there roots that rotate them up a little when you throttle up. pitch and roll control is achieved by a mechanism called a swash plate that part is really hard to build. does any of that help? @JSwannyGaming148
Troubleshooting : check if the wings are the right side up, and is the wings leading edge on the right side, are the rotators rotating the blades the right way. does any of this help? @TommyGunH
Hello, where do I start? there are small vtol nozzles at the end of the rotor blades the blades are made of wings and there are rotators at there roots that rotate them up a little when you throttle up. pitch and roll control is achieved by a mechanism called a swash plate that part is really hard to build. does any of that help? @TommyGunH
@Drobot432 Hello again. There is a scaled down inferno missile hidden in the front of the dummy missile, the inferno is attached to the bottom of a detacher, trough the magic of xml modding a fuselage block is attached to the same attachment point, the missile is built out from that fuselage block, when the inferno is lunched it triggers the detacher to detach at its top but inferno stays attached to the bottom pulling the detacher along the rest of the missile follows the detacher. There is a scaled down bomb hidden in the nose acting as an anti ship warhead, bombs act. group is set to 5 to keep to keep it from being selected as a weapon.
Hello. looks to me like the canter of mass is behind canter of lift add some dead weight to the front, also the canard(front wing) control surface need to be inverted.
Ones you set propeller pitch control to manual a throttle governor option will appear just below, a pitch range scale will appear as well you can change propeller pitch input at the bottom of the many. @Drobot432
There is a something called .XML modding don't know if you know of it. It allows you to get access to part properties in the game engine the user interface does not support you can learn more about it here and find some .XML modded parts here @Drobot432
Yes it is powered by a scaled down VTOL you will find it just behind the gun on the bottom of the helicopter and scaled down nozzles at the blade tips, you can copy my rotor, you may even upload your creation. @Drobot432
Getting the rotors to work like that? Don't know where to start, understanding of basic physics and a lot of trial and error and then some more trial and error. @Benkelmans
A working stabilizer bar awesome!
@DeezNuts52 doesn't do anything.
@DeezNuts52 sorry I don't understand the question
This made my jaw drop!
@frostbiteread read the description and you can vote on my next build.
@TheBigEgg You may use it but you need to use the modified engine found in the passenger area sealing or it will tare it self apart, I would recommend using the rotor from my eurocopter tiger it is easier to work with.
@TTHHSSSS actually I am working on a K-max rotor prototype as a side project, when it it's not exploding it flies reasonably well, it needs a lot more trial and error.
@rhettispagetti You point the nose down 20 degrees like any other helicopter.
You can never have too many turrets!
@frostbite So many helicopters to build, so little time :( Not promising anything but I will keep it in mind.
@Supercraft888 thank you for the compliment, first of all what did you mean by "Cale" if it's scale I use the FINE TUNER mod another useful mod is OVERLOAD.
Hello, where do I start? there are small vtol nozzles at the end of the rotor blades the blades are made of wings and there are rotators at there roots that rotate them up a little when you throttle up. pitch and roll control is achieved by a mechanism called a swash plate that part is really hard to build. does any of that help? @JSwannyGaming148
Troubleshooting : check if the wings are the right side up, and is the wings leading edge on the right side, are the rotators rotating the blades the right way. does any of this help? @TommyGunH
Where do I start, understanding of physics and lots and lots and lots ... of trial and error, @Supercraft888
@A3 I am thinking of making a police jet ranger.
Lol :) @Rcb1235
I am loving the access panels and leaders!
Sea Slug is love, Sea Slug is life.
Hello, where do I start? there are small vtol nozzles at the end of the rotor blades the blades are made of wings and there are rotators at there roots that rotate them up a little when you throttle up. pitch and roll control is achieved by a mechanism called a swash plate that part is really hard to build. does any of that help? @TommyGunH
Beautiful and deadly!
@Drobot432 Hello again. There is a scaled down inferno missile hidden in the front of the dummy missile, the inferno is attached to the bottom of a detacher, trough the magic of xml modding a fuselage block is attached to the same attachment point, the missile is built out from that fuselage block, when the inferno is lunched it triggers the detacher to detach at its top but inferno stays attached to the bottom pulling the detacher along the rest of the missile follows the detacher. There is a scaled down bomb hidden in the nose acting as an anti ship warhead, bombs act. group is set to 5 to keep to keep it from being selected as a weapon.
That could be any number of things, could you share it unlisted so I can have a look? @MechWARRIOR57
Sure, what is troubling you? @MechWARRIOR57
From the bottom of mu heart thank you for this mod, and the new feature!
Thank you so much for this! I was daydreaming about such a mod.
????!!! Nice polygon modeling, HOW did you do that?
Cool
The yaw control is backwards but still a nice build.
Do I schmell luftwaffles? But seriously excellent in every way!
looks like the wing is too big for a single joint,I suggest making the wing out of several smaller segments one behind the other.
Hello. looks to me like the canter of mass is behind canter of lift add some dead weight to the front, also the canard(front wing) control surface need to be inverted.
Ones you set propeller pitch control to manual a throttle governor option will appear just below, a pitch range scale will appear as well you can change propeller pitch input at the bottom of the many. @Drobot432
There is a something called .XML modding don't know if you know of it. It allows you to get access to part properties in the game engine the user interface does not support you can learn more about it here and find some .XML modded parts here @Drobot432
Using the Fine tuner mod @Drobot432
Yes it is powered by a scaled down VTOL you will find it just behind the gun on the bottom of the helicopter and scaled down nozzles at the blade tips, you can copy my rotor, you may even upload your creation. @Drobot432
@Drobot432 Hello, I would love to help, what exactly is troubling you.
Getting the rotors to work like that? Don't know where to start, understanding of basic physics and a lot of trial and error and then some more trial and error. @Benkelmans
This is great! but why is it backwards?
Nice elevators!
Thank you for the alerting me @Supercraft888
Go ahead, what do you want to do with it? @PyrusEnderhunter
@PhilipTarpley Awesome!
na na na na na na na na na na na na na na na na BATMAAAN
@deusalgor lol
I do love a nice dwarven aircraft, but it doesn't seem to have roll control.
Thank you for the update @deusalgor this was a lot of fun :)
@deusalgor Awesome!
@1997toyotasupra Yes they got an arms race going now.
The rudder is backwards and CoM might be too far forward but i like the shape.
Hello @deusalgor made some improvements to my entry, now it is ready, and thank you for organizing this competition.