I am in the mood to really help out new players, so if you want a more appealing thumbnail, (like a screenshot you see in highest rated) I can tell you how. When you press the little eye icon under the add parts icon on the right, new boxes should appear. Press the top left new box and it should make the view of the plane weird. The back should appear bigger than the front, and what you have to do is press the blueprint tab below the one you just pressed. Select one of the following: top, side, or front. Once you picked one, press open image. Choose an image from your photo gallery and it will show up. Use the “four arrows” tool and it should turn green. You can now move the image around. Make it to any size you want, and away from the actual plane. (This image should be a screenshot of the plane) share the plane, and press screenshots. The image will appear and zoom in so all you capture is the screenshot/image you took in game. I will give you a link to my tutorial here
@AhmetOnYT no problem! Also use the wrench tool when you go to the rotations tab. When you scroll down, you can find increases and decreases that can move the part selected around. It can also move connected parts. The sliders above that help rotate the piece(s)
Thank you so much @oldmate52 for awarding me 1st! I worked very hard on my replica using such a limited set of parts. I am honored to be featured in your video and I am also very grateful!
@TAOZOU wdym? Ofc I can download it if I made it, what I am saying is that if he makes an actual mod I won’t be able to download it because I’m on mobile
@A330neoISGOATED Ermm, it does appear that you forgot to capitalize the “A” in “always”. By the way, it is unclear whom you are describing, as you have also forgotten to include pronouns such as “I”. 🤓👆
@SantosIRIARTE the reason it was twisting is because the center of mass was too close to the center of lift. I could see you tried forcing it as far back as possible without altering the stability. I forced it back forward and tilted the horizontal stabilizers at a 2 degree angle to keep the plane facing up better.
@screechy I’ll start making the helicopter, I will use a helicopter nose I already made that is free to use. I’m guessing it should be maritime like this one? Like anti ship I mean
Btw congrats on 10k! When I reached 10k , it finally felt like I would be respected in the community and looked up by smaller players as a prime example of what they can get from working hard!
Eagle II* btw the spacing between the landing gear really helps a lot! :) thsi is great and the paint job looks Marvelous. Performance and speed is great for working together and this plane is just really good!
Now the designation should be changed from CV22 to AV22!
+1For me, the missile launchers will ignore you if you take off from the ice base
+3@Graingy well jokes on you, I will make a real lemon cake. 🍋 🎂 🧁
@SchweizerLuftCorporation not rlly Lol
+1@Graingy why tf bring me to tumblr?
I am in the mood to really help out new players, so if you want a more appealing thumbnail, (like a screenshot you see in highest rated) I can tell you how. When you press the little eye icon under the add parts icon on the right, new boxes should appear. Press the top left new box and it should make the view of the plane weird. The back should appear bigger than the front, and what you have to do is press the blueprint tab below the one you just pressed. Select one of the following: top, side, or front. Once you picked one, press open image. Choose an image from your photo gallery and it will show up. Use the “four arrows” tool and it should turn green. You can now move the image around. Make it to any size you want, and away from the actual plane. (This image should be a screenshot of the plane) share the plane, and press screenshots. The image will appear and zoom in so all you capture is the screenshot/image you took in game. I will give you a link to my tutorial here
@AhmetOnYT no problem! Also use the wrench tool when you go to the rotations tab. When you scroll down, you can find increases and decreases that can move the part selected around. It can also move connected parts. The sliders above that help rotate the piece(s)
I just flew on this plane to Dublin
@Mousewithamachinegun122 capybara with a machinegun
@Mousewithamachinegun122 scrambled mouse! 🐁🪤🍳😋
I AM GOING TO MAKE MY OWN CAKE! >:D
MAKE WAY FOR THE DEANNN
+1MAKE WAY FORA THE DEANNN
+1@Metalpipe223 I’d advise dropping it out of my BS58
@Metalpipe223 depends. airdropping it, yes.
Thank you so much @oldmate52 for awarding me 1st! I worked very hard on my replica using such a limited set of parts. I am honored to be featured in your video and I am also very grateful!
+1@Trainz448 nope :) just
MAGGOTS
+2MAGGOTS
+4@SchweizerLuftCorporation Lol I had to go and didn’t have time, but I like the canopy!
Those are some pretty stubby wings
+1U finally remade that Concorde! Btw you’re close to Gold, only about 800 points to go!
@SantosIRIARTE Lol
press where’s my prize?!?
@SantosIRIARTE no problem! Remember to adjust the angle you set the horizontal stabilizers to next time
@TAOZOU wdym? Ofc I can download it if I made it, what I am saying is that if he makes an actual mod I won’t be able to download it because I’m on mobile
@A330neoISGOATED Ermm, it does appear that you forgot to capitalize the “A” in “always”. By the way, it is unclear whom you are describing, as you have also forgotten to include pronouns such as “I”. 🤓👆
+2@Apollo018362 great job as always :) keep up the good work!
+1@DatTrainAndCarGuy19 huzzah
@Boeig I was bored and saw ur challenge and asked myself why not :/
@SantosIRIARTE the reason it was twisting is because the center of mass was too close to the center of lift. I could see you tried forcing it as far back as possible without altering the stability. I forced it back forward and tilted the horizontal stabilizers at a 2 degree angle to keep the plane facing up better.
@SantosIRIARTE I already changed it to 15 and speed to 30, I can see it jerks to the right or left when pulling up. I’ll try to fix it
@MonarchiiwithastolenMG look in a mirror, ur reflection should be close the fourth dimension after being flipped through dimensions I think
+1@Graingy @MonarchiiwithastolenMG it is 4D
Does it twist when rolling or pitching?
Better add anti submarine helicopter to that list
@screechy I can make an unlisted post we can talk there. I don’t have discord
@screechy what abt ESPH-4A for designation? E (electronic warfare) S (anti-submarine) and P (Patrol) H (Helicopter)?
@screechy kk
@screechy I’ll start making the helicopter, I will use a helicopter nose I already made that is free to use. I’m guessing it should be maritime like this one? Like anti ship I mean
+1@BYardley >:(
+1@screechy really? What country u from because I’m in America and it’s spring break rn
@CorporalWojak go for it! I won’t be able to download it because I’m on mobile
+1T
I could tell! Swedish designers at Saab knew what they were doing, and so were you
+1@IMFLYINHERE @Mousewithamachinegun122 POV: me, adds 1 more wing
Btw congrats on 10k! When I reached 10k , it finally felt like I would be respected in the community and looked up by smaller players as a prime example of what they can get from working hard!
Eagle II* btw the spacing between the landing gear really helps a lot! :) thsi is great and the paint job looks Marvelous. Performance and speed is great for working together and this plane is just really good!
+1I won’t say the British people stuff, but I have this water bottle irl and I will send a pic. Also tag. Water bottle here
+1@CorporalWojak idk how and prob don’t have time, cool idea though!
+1Front view looks like he got 1 1/2 hours of sleep last night
+2