If you want any background, I wanted to make an m3 Stuart that was actually to a 1:1 scale based off of the cannon. I couldn’t find any that worked well so, I just decided to do it myself.
@Fancyplane I made basic tracks and tried to mess around with the suspension to get it to work and accidentally made something that is the absolutely most radical tank
Great Build! Very Nice! It has been brought to my attention that you've made a certain comment and have removed some of my posts. I do not disagree with the fact, however, I do not want to take credit for other people's builds and I truly do believe that is why there is an original author that automatically shows up when you're posting a modified build. I have been getting some petty comments complaining about me reposting others' builds. I am not sure that you saw my comment that I added on the build as it was removed. I just want to make my statement clear and do not want to stir and problems up. Below is my comment.
@Squirrel Sorry, I posted it so I could transfer It from my phone to my computer as I use both to create planes, I am planning on posting the version that I made personal changes to. I'm sorry for disturbing you, I just want to show appreciation for the creators of ww2 era builds as I am a very big history nerd. To see cool planes such as the Ha-1112 in simple planes excites me. If you must know why I needed to transfer, it is because of some sub-assemblies that I have on my computer being more useful to what I want to build. Thanks, TheManChan
As I stated, I do not want to cause any disruptions, I only want to state my point and where I'm coming from.
@SmallyRocket I'm very sorry for causing you distress. I was required to post this plane so I could transfer the design to my computer. I very much enjoy studying history and love it when people appreciate the technological advancements that war forces on society. For instance, when one country, specifically Germany, came out with the Me-262, a jet fighter, opposing countries, such as Britain, were forced to create the Gloster Meteor. Once again, I am sorry to cause you any disturbances, but saying something as petty as you did, was it worth it? To take 5 seconds just to disturb someone trying to enjoy history?
@DarkRave23 I also forgot to mention that I think that the physics of the body mg or even fitting a driver in the hull would be nearly impossible without him practically laying down, note for next time, make the body a bit taller.
@Mustang51 Well, it been a while, as for your question, that's for you to figure out. I will post my MkV of this bomber soon. I used this to help some people get started if they wanted to build an Avro Lancaster type bomber. Short or long as long as you have fun, then I'm happy.
@Squirrel Sorry, I posted it so I could transfer It from my phone to my computer as I use both to create planes, I am planning on posting the version that I made personal changes to. I'm sorry for disturbing you, I just want to show appreciation for the creators of ww2 era builds as I am a very big history nerd. To see cool planes such as the Ha-1112 in simple planes excites me. If you must know why I needed to transfer, it is because of some sub-assemblies that I have on my computer being more useful to what I want to build. Thanks, TheManChan
@RamboJutter He looks like he saw too much... also he kinda looks like a muppet :)
What did the pilot see....
I would love for this build to get featured
If you want any background, I wanted to make an m3 Stuart that was actually to a 1:1 scale based off of the cannon. I couldn’t find any that worked well so, I just decided to do it myself.
@Wernster go check out the OG post
@TheClient my discord name is TheChanMan#1699
@JustNormalPerson modified t-34 bias machine
@JustNormalPerson why not
@TheClient I just got the M10 TD, and I also play as the Germans. I’ll hit u up when I get a chance
Also big thanks to Pancelnovat because I used his American vehicles 1941 pack because I found the tanks to be to about a 1:1 scale
@TheClient if you can get the tracks fixed then 10/10 would recommend
@TheClient dude definitely
@Fancyplane I made basic tracks and tried to mess around with the suspension to get it to work and accidentally made something that is the absolutely most radical tank
Will it attack the uss beast when spawned in as an AI?
Very interesting
Ah yes, the low tier plane that you see in front of you and it magically is behind you.
I’d like an updated version that allows the decorative guns to work. They seem very useful.
@Squirrel Thanks for the help!
@Squirrel Fair enough. How do I unlist the plane/vehicle before I post it?
Great Build! Very Nice! It has been brought to my attention that you've made a certain comment and have removed some of my posts. I do not disagree with the fact, however, I do not want to take credit for other people's builds and I truly do believe that is why there is an original author that automatically shows up when you're posting a modified build. I have been getting some petty comments complaining about me reposting others' builds. I am not sure that you saw my comment that I added on the build as it was removed. I just want to make my statement clear and do not want to stir and problems up. Below is my comment.
@Squirrel Sorry, I posted it so I could transfer It from my phone to my computer as I use both to create planes, I am planning on posting the version that I made personal changes to. I'm sorry for disturbing you, I just want to show appreciation for the creators of ww2 era builds as I am a very big history nerd. To see cool planes such as the Ha-1112 in simple planes excites me. If you must know why I needed to transfer, it is because of some sub-assemblies that I have on my computer being more useful to what I want to build. Thanks, TheManChan
As I stated, I do not want to cause any disruptions, I only want to state my point and where I'm coming from.
@SmallyRocket I'm very sorry for causing you distress. I was required to post this plane so I could transfer the design to my computer. I very much enjoy studying history and love it when people appreciate the technological advancements that war forces on society. For instance, when one country, specifically Germany, came out with the Me-262, a jet fighter, opposing countries, such as Britain, were forced to create the Gloster Meteor. Once again, I am sorry to cause you any disturbances, but saying something as petty as you did, was it worth it? To take 5 seconds just to disturb someone trying to enjoy history?
@DarkRave23 I also forgot to mention that I think that the physics of the body mg or even fitting a driver in the hull would be nearly impossible without him practically laying down, note for next time, make the body a bit taller.
@Mustang51 It's done!
@TastyTanks I believe this either has an 8 mile or 6-mile flak, maybe less its described here.
https://www.simpleplanes.com/a/J93lBq/120mm-M1-Flak-Gun
@Poatatoman I borrowed the cannons from a flak gun
here is the link
https://www.simpleplanes.com/a/J93lBq/120mm-M1-Flak-Gun
@Mantha Just mess around with it because I forget everything
@Mustang51 Well, it been a while, as for your question, that's for you to figure out. I will post my MkV of this bomber soon. I used this to help some people get started if they wanted to build an Avro Lancaster type bomber. Short or long as long as you have fun, then I'm happy.
@Squirrel Sorry, I posted it so I could transfer It from my phone to my computer as I use both to create planes, I am planning on posting the version that I made personal changes to. I'm sorry for disturbing you, I just want to show appreciation for the creators of ww2 era builds as I am a very big history nerd. To see cool planes such as the Ha-1112 in simple planes excites me. If you must know why I needed to transfer, it is because of some sub-assemblies that I have on my computer being more useful to what I want to build. Thanks, TheManChan
@DarkRave23 Forgot to include that it makes a big boom
Check out my GMC I think you'd like it considering your posts
http://www.simpleplanes.com/a/jnxWK0/Hideman-TD-2h-GMC-1st-Armored-Div
Good job comrade.
Still not sure how it works
How do you turn it on? And how does it work, I don't know how to "clamp latitude"
Thanks randomusername for the upvote!
Sorry about the question marks in the title. Its weird how that happened.
Thanks so much for the support! I would love to collaborate with you on potentially improving my design and working together in the future.