@c144538707 THE ROTATION POINTS ARE RIGHT BECAUSE OF THE FIREFLY MSSILES IF BLOCKED MISSILES MIGHT DESTROY THE SHOULDERS OF THE MS AND RAILCANNON I SEEN WERE SEEN BETWEEN THE HEAD AND SHOULDERS
@ThatGuySaucy YOU BUILT THIS 3 MONTHS AFTER IT WAS OPENED YOU DONT KNOW YOU BUILT THIS 3 MONTHS AFTER LIKE I DID AFTER THE RISING FREEDOMA AND IMMORTAL JUSTICE WAS SHOWN
@Clean PROBLEM IS THE BS IS IN THE WAY OF THE PERFECTIBILITIES AND ALSO THE BEAM SABER WHERE THE PERFECTIBILITY USES THE AXE SO NO
BUT THERE BE MORE DESIGN DEATILS FOR IT IN THE NEAR FUTURE
Anyone who likes this craft pls check out my SKYGRASPER my version is way more detailed then this build I used fandom to build high detailed builds like my 105 dagger
@FOXHOUND26 OK I WAS USING CAPS DUE TO PEOPLE NOT UNDERSTANDING ANY INFORMATION SO I USED CAPS AND SECOND IPADS DONT HAVE CAPS LOCK KEY DUE TO IT HAS CAPS KEY FOR BIGGER AND MORE PRACTICAL LETTERS
@c144538707 THIS IS NOT A GUNDAM AND YES ITS LEGS AND TORSO WERE A DERIEVED VERSIONS OF THE FREEDOMS LEGS BUT REDISIGNED TO THAT OF THE 105 DAGGER AND TORSO DERIEVED FROM THE JUSTICE BUT REDISIGNED TO THAT OF THE 105 DAGGER AND SHOULDERS THAT OF THE 105 DAGGER AND THERE ARE NO ALTERATIONS EXCEPT FOR THE SWORD THE ONLY ALTERATION FROM MY UPCOMING SKYGRASPER AND THE HEAD DERIEVED FROM MY X35A SERIES GUNDAM AND THE MOUTH THING ISNT THERE I REMOVED THE BLACK MARKS BEFORE RELEASING THE FIRST VERSION OF THE 105 DAGGER ALSO THE V FIN LEAVING ONLY THE HORNS
IF IT WAS THE GAT 01 STRIKE DAGGER I WOULD DO THE SAME LIKE I DID WITH THIS ONE BUT LEAVING ONE HORN
@Stinkyhouse it’s similar to my older version with the name WENHUAISHI2 with 2 as second meaning second account of the original WENHUAISHI ACCOUNT this account will only have mecha tanks one named Orion a prototype mecha tank bases of stagger mecha tank
@Stinkyhouse right now I’m busy on my first update of my remake of mighty strike freedom and my third update of the WINDAM and I just released my new multi WINDAM
@Stinkyhouse I told you not on aircraft posts do it only in the designated forum ment for you and others to make requests of builds and also I told no complex frame design exia is not part of c.e or p.d wait till I’m more experienced with that type of gundams
@Stinkyhouse THIRD PLS MAKE SURE TO COMMENT ONLY ON MY FORUM POSTS AND NOT ON MY AIRCRAFT POSTS PLS SO I HAVE AN EASIER TIME COMMENTING ON FORUM
https://www.simpleplanes.com/Forums/View/1922220/MOBILE-SUIT-DESIGN-AND-REQUESTS-AND-OTHER
COMMENT IN THIS FORUM FOR MS DESIGN OR QUESTIONS PLS ALSO BOOKMARK IT SO YOU CAN ASK ME FOR MS DESIGN OR ANYTHING NO COMPLEX FRAME DESIGNS IM STILL LEARNING THE DESIGN OF FRAMES FROM OTHER ERAS
@Stinkyhouse I ALSO BUILT 2 GROUND USE MOBILE SUITS THE BUCUE AND LAGOWE WHICH WERE ACED EASYILY DESPITE THEIR LESS COMPLEX DESIGN AND GUNDAMS AS WELL OF THE C.E AND ALSO SUPPORT CRAFTS LIKE THE PROUD DEFENDER AND SKYGRASPER DUE TO THEIR LESS COMPLEX DESIGN AND ALSO EVAN MORE
@Stinkyhouse AND SECOND OF ALL I CANT BUILD ANY OTHER ERA MS BUT P.D AND C.E DUE TO THEIR MUCH EASY AND I KNOW OTHER ERAS WOULD BECOME POSSIBLE IF MUCH PRACTICE FOR MS FRAME DESIGN
@Stinkyhouse HIS EXIA HAS A SHEILD DID YOU DIDDNT EVAN SEE A SCREENSHOT ON ONE OF HIS POSTS ARE YOU EVAN BLIND PLS SEE MUCH CLOSER TO WHAT THE EXIA HAS AND I KNOW THE SHEILD IS ON THE LEFT ARM I HAVE SEEN IT BEFORE
@Stinkyhouse RIHGT NOW IM DOING C.E NOT U.C RIGHT NOW IM TIRED OF DOING U.C REQUESTS JUST FOR 11 MONTHS AND SECOND TELEPORTATION IS IMMPOSSIBLE RIGHT NOW ALSO AND IM STARTING TO GET SICK ABOUT U.C REQUESTS RIGHT NOW IM VERY BUSY ON C.E AND SECOND THE FREEDOM YOU POSTED IS NOT U.C ITS C.E AND SECOND ITS NOT MADE BY EFSF ITS MADE BY ZAFT PLS WATCH GUNDAM SEED AND YOU SEE WHICH MS COMPANY MADE THAT MS
@Stinkysock ONE PROBLEM IS i dont know how to make ariel style grabbing due to me having high experience with only c.e ms and i cant be able until i figure out how to get a fully functional drone system that would work for attaching to arm but i 1.7 away from drone use i only seen ariel grabbing a beam saber on game and this is immpossible for me pls wait until im 100% experience with drone or maybe ask the person who created ariel to help you i dont know how and pls i need a brake from rx-0 requests so im going to be making zgmf series uninterrupted so i can concentrate on updating my c.e gundams and finish a asw-g-64 unit so i need 11 months of brake time from doing the rx-0 series and second i dont know how for a working sheild its also impossible i seen a working sheild on a ariel ask the creator of ariel to help you
@Stinkysock i finished it pls wait until my 24 hour mark is up due to my immortal justice 5th update has not reach 24 hour mark so pls wait and you will be able to play with the new unicorn gundam perfectibility soon
@Stinkysock problem is the detaching the d.e will be a problem due to it was ment for attitude control so it can fly straight if detached it will turn 0.5 due to the d.e is meant to keep turning from happening and 2nd equipment fix perfectibility has a7 faster system disabled it is easy I have it not uploaded yet and second I’m still working on c.e gundams and freedom is not part of efsf it’s part of ZAFT pls make sure you know that freedom is zaft made not efsf made
@Stinkysock the problem is that Edson rhidde was unable to use vn or bs due to lack of Newtype power that’s why I added 2 more d.es like I did with my banshee Mk II and I know very well and the full armor that unicorn used is only on navel argama that’s why the banshee uses standard Rx.0 equipment
Edson rhidde has lacked newtype power so he would need to only rely on the armed armor d.e and beam magnum so I added 2 more armed armor d.es just like how phenex had its armed armor d.es on back
and second vist foundation only put rx.0 equipment not any Ms equipment and they only added the d.e xc and beam magnum due to Edson being a newbie for the rx.0 SERIES
PHENEX BE a good choice for full armor due to has a ability to use the d.es like funnels it might be compatible with vn and bs
@c144538707 I’m updating these things that’s why my gundams are frequent every day and I’m making a lot of original gundams from gundam seed to seed freedom that’s why my posts are frequent and I’m soon releasing this again today update 5 with katana this time
THAT LOOKS LIKE A AXE BLADE ON YOUR SCREENSHOT but I replicated that part by using multiple parts like the fuselage and I finally made a replica of the part from the graze concept
@Bendabomb THANKS
@LJh1 thanks and as well same with the windam multi
+1@c144538707 there’s a chance there be a type ii of freedom because of how orb repaired the freedom before and is possible
@Majakalona I MEAN A MOBILE SUIT A TYPE OF 18 METER GIANT MECH FOUND IN MOBILE SUIT GUNDAM
+1@Justused because it is due to my previous ones that failed testing so I used a prototype MS and built it small but I’m creating a updated version
@c144538707 IN A FUTURE UPDATE
@c144538707 and this is my first upload see my new version that has more detail to its blast silhouette
@c144538707 THE ROTATION POINTS ARE RIGHT BECAUSE OF THE FIREFLY MSSILES IF BLOCKED MISSILES MIGHT DESTROY THE SHOULDERS OF THE MS AND RAILCANNON I SEEN WERE SEEN BETWEEN THE HEAD AND SHOULDERS
@Clean and i made a prototype melee weapon on my seventh earth alliance ms that means i am closer to building a axe for the unicorn gundam
@Clean yes this is cool despite being the successor to the true justice gundam
@Majakalona this is not a robot this is a mobile suit
+1I BUILT THE GARETH WR ROBOT
@Hiiamhere THANK YOU
@ThatGuySaucy YOU BUILT THIS 3 MONTHS AFTER IT WAS OPENED YOU DONT KNOW YOU BUILT THIS 3 MONTHS AFTER LIKE I DID AFTER THE RISING FREEDOMA AND IMMORTAL JUSTICE WAS SHOWN
Wow this is based off from Yokohama gundam factory rx-78 2 gundam
@Clean PROBLEM IS THE BS IS IN THE WAY OF THE PERFECTIBILITIES AND ALSO THE BEAM SABER WHERE THE PERFECTIBILITY USES THE AXE SO NO
BUT THERE BE MORE DESIGN DEATILS FOR IT IN THE NEAR FUTURE
I HAVE A NEW VERSION OF THE STRIKE GUNDAM AND WAY MORE CONTROLABLE AND IS THE NEW VERSION AND NEW DETAILS AND BETTER CONTROL SYSTEM
NOT AN MOBILE SUIT COME SEE WHAT ARE MOBILE SUITS IN MY PAGE AND SEE WHAT THEY LOOK LIKE
Anyone who likes this craft pls check out my SKYGRASPER my version is way more detailed then this build I used fandom to build high detailed builds like my 105 dagger
@FOXHOUND26 do you like my build the updated 105 DAGGER
@FOXHOUND26 OK I WAS USING CAPS DUE TO PEOPLE NOT UNDERSTANDING ANY INFORMATION SO I USED CAPS AND SECOND IPADS DONT HAVE CAPS LOCK KEY DUE TO IT HAS CAPS KEY FOR BIGGER AND MORE PRACTICAL LETTERS
@Robomo119E YES THE SERIES ARE VERY GOOD INCLUDING THE SEQUELS
@c144538707 THIS IS NOT A GUNDAM AND YES ITS LEGS AND TORSO WERE A DERIEVED VERSIONS OF THE FREEDOMS LEGS BUT REDISIGNED TO THAT OF THE 105 DAGGER AND TORSO DERIEVED FROM THE JUSTICE BUT REDISIGNED TO THAT OF THE 105 DAGGER AND SHOULDERS THAT OF THE 105 DAGGER AND THERE ARE NO ALTERATIONS EXCEPT FOR THE SWORD THE ONLY ALTERATION FROM MY UPCOMING SKYGRASPER AND THE HEAD DERIEVED FROM MY X35A SERIES GUNDAM AND THE MOUTH THING ISNT THERE I REMOVED THE BLACK MARKS BEFORE RELEASING THE FIRST VERSION OF THE 105 DAGGER ALSO THE V FIN LEAVING ONLY THE HORNS
IF IT WAS THE GAT 01 STRIKE DAGGER I WOULD DO THE SAME LIKE I DID WITH THIS ONE BUT LEAVING ONE HORN
@Stinkyhouse it’s similar to my older version with the name WENHUAISHI2 with 2 as second meaning second account of the original WENHUAISHI ACCOUNT this account will only have mecha tanks one named Orion a prototype mecha tank bases of stagger mecha tank
@Stinkyhouse I already made a new account for my new mecha tanks I have been developing
THIS IS SIMILAR WHEN IM NUKING USS BEAST WITH THE WINDAMS NUKES
@Stinkyhouse I CANT DUE TO MY OTHER DELAYED PROJECTS LIKE THE SWORD SKYGRASPER AND ALOT OF DELAYED PROJECTS SO IT WILL TAKE MORE TIME THEN TOMMOROW
@Stinkyhouse right now I’m busy on my first update of my remake of mighty strike freedom and my third update of the WINDAM and I just released my new multi WINDAM
@Kerbango no be aware i only do Mdzs or avatar character simples not any type outside of Mdzs or avatar
+1@Stinkyhouse I told you not on aircraft posts do it only in the designated forum ment for you and others to make requests of builds and also I told no complex frame design exia is not part of c.e or p.d wait till I’m more experienced with that type of gundams
@Stinkyhouse HERE IS THE LINK GO TO GALLERY AND SEE SHEILD DETAILS AND YOU WILL KNOW WHICH I MEAN
https://gundam.fandom.com/wiki/GN-001GundamExia
@Stinkyhouse IT WILL TELL ME ITS ON LEFT FORE ARM AND SECOND PLS SEE IN GUNDAM FANDOM TO SEE THE SHAPE OF THAT SHEILD
@Stinkyhouse pls see the left arm it’s their
https://www.simpleplanes.com/a/RRcU8H/Exia-2-0
THE SHEILD IS ON THIS ONE
@Stinkyhouse THIRD PLS MAKE SURE TO COMMENT ONLY ON MY FORUM POSTS AND NOT ON MY AIRCRAFT POSTS PLS SO I HAVE AN EASIER TIME COMMENTING ON FORUM
https://www.simpleplanes.com/Forums/View/1922220/MOBILE-SUIT-DESIGN-AND-REQUESTS-AND-OTHER
COMMENT IN THIS FORUM FOR MS DESIGN OR QUESTIONS PLS ALSO BOOKMARK IT SO YOU CAN ASK ME FOR MS DESIGN OR ANYTHING NO COMPLEX FRAME DESIGNS IM STILL LEARNING THE DESIGN OF FRAMES FROM OTHER ERAS
@Stinkyhouse I ALSO BUILT 2 GROUND USE MOBILE SUITS THE BUCUE AND LAGOWE WHICH WERE ACED EASYILY DESPITE THEIR LESS COMPLEX DESIGN AND GUNDAMS AS WELL OF THE C.E AND ALSO SUPPORT CRAFTS LIKE THE PROUD DEFENDER AND SKYGRASPER DUE TO THEIR LESS COMPLEX DESIGN AND ALSO EVAN MORE
@Stinkyhouse AND SECOND OF ALL I CANT BUILD ANY OTHER ERA MS BUT P.D AND C.E DUE TO THEIR MUCH EASY AND I KNOW OTHER ERAS WOULD BECOME POSSIBLE IF MUCH PRACTICE FOR MS FRAME DESIGN
@Stinkyhouse HIS EXIA HAS A SHEILD DID YOU DIDDNT EVAN SEE A SCREENSHOT ON ONE OF HIS POSTS ARE YOU EVAN BLIND PLS SEE MUCH CLOSER TO WHAT THE EXIA HAS AND I KNOW THE SHEILD IS ON THE LEFT ARM I HAVE SEEN IT BEFORE
@Stinkyhouse RIHGT NOW IM DOING C.E NOT U.C RIGHT NOW IM TIRED OF DOING U.C REQUESTS JUST FOR 11 MONTHS AND SECOND TELEPORTATION IS IMMPOSSIBLE RIGHT NOW ALSO AND IM STARTING TO GET SICK ABOUT U.C REQUESTS RIGHT NOW IM VERY BUSY ON C.E AND SECOND THE FREEDOM YOU POSTED IS NOT U.C ITS C.E AND SECOND ITS NOT MADE BY EFSF ITS MADE BY ZAFT PLS WATCH GUNDAM SEED AND YOU SEE WHICH MS COMPANY MADE THAT MS
@Stinkysock ONE PROBLEM IS i dont know how to make ariel style grabbing due to me having high experience with only c.e ms and i cant be able until i figure out how to get a fully functional drone system that would work for attaching to arm but i 1.7 away from drone use i only seen ariel grabbing a beam saber on game and this is immpossible for me pls wait until im 100% experience with drone or maybe ask the person who created ariel to help you i dont know how and pls i need a brake from rx-0 requests so im going to be making zgmf series uninterrupted so i can concentrate on updating my c.e gundams and finish a asw-g-64 unit so i need 11 months of brake time from doing the rx-0 series and second i dont know how for a working sheild its also impossible i seen a working sheild on a ariel ask the creator of ariel to help you
@Stinkysock I made c.e mobile suits far easy by using prebuilt designs like the Ms and Ms II bodies to biuild every design and new gundams
@Stinkysock YEAH I KNOW I SEEN PHENEX BEFORE AND THE PERFECTIBILITY
@Stinkysock i finished it pls wait until my 24 hour mark is up due to my immortal justice 5th update has not reach 24 hour mark so pls wait and you will be able to play with the new unicorn gundam perfectibility soon
@Stinkysock problem is the detaching the d.e will be a problem due to it was ment for attitude control so it can fly straight if detached it will turn 0.5 due to the d.e is meant to keep turning from happening and 2nd equipment fix perfectibility has a7 faster system disabled it is easy I have it not uploaded yet and second I’m still working on c.e gundams and freedom is not part of efsf it’s part of ZAFT pls make sure you know that freedom is zaft made not efsf made
@Stinkysock it’s easy Activate5 CODE IT’S EASY due to replacing the old a7 TO a5
@Stinkysock the problem is that Edson rhidde was unable to use vn or bs due to lack of Newtype power that’s why I added 2 more d.es like I did with my banshee Mk II and I know very well and the full armor that unicorn used is only on navel argama that’s why the banshee uses standard Rx.0 equipment
Edson rhidde has lacked newtype power so he would need to only rely on the armed armor d.e and beam magnum so I added 2 more armed armor d.es just like how phenex had its armed armor d.es on back
and second vist foundation only put rx.0 equipment not any Ms equipment and they only added the d.e xc and beam magnum due to Edson being a newbie for the rx.0 SERIES
PHENEX BE a good choice for full armor due to has a ability to use the d.es like funnels it might be compatible with vn and bs
tracerColor and color code for changing the bullet color
@c144538707 I’m updating these things that’s why my gundams are frequent every day and I’m making a lot of original gundams from gundam seed to seed freedom that’s why my posts are frequent and I’m soon releasing this again today update 5 with katana this time
THAT LOOKS LIKE A AXE BLADE ON YOUR SCREENSHOT but I replicated that part by using multiple parts like the fuselage and I finally made a replica of the part from the graze concept
@IceCraftGaming no it’s not it’s a eb-06 GRAZE FROM IRON BLOODED ORPHANA PLS KNOW THE SENSOR ON THE HEAD OF THAT MAKE SURE LOOK CLOSELY
+1@Leijzjz AND THANK YOU FOR LOVING MY BUILDS THAT IS A GOOD THING