NOTE: This is a piston powered engine, hence why it has so many parts.
NOTE 2: the mod Limitless spin is recomended for this engine, as the pistons use a 4.25x speed multiplier
As I promised, here is another piece of mechanical engineering.
controls: Throttle
Startup: 14-20%
Safe range: 20-90%
Redline: 91-100% (856 RPM)
the output shaft is at the back, so feel free to atach anything that can rotate on the back. susprisingly, this engine is as tiny as a IRL 2.0L inline 4
If yu plan on putting a clutch on this thing, always try to engage the clutch between 40-70% throttle, so the engine won't stall.
Note: this engine is not for heavy loads, only light applications or boats, as it lacks a good amount of torque in exchange for RPM. it was more of a test of how high I could rev the engine before blowing it up xd
Specifications
Spotlights
- Spikerya 6.1 years ago
- TigerEye35 6.1 years ago
- getorge 6.1 years ago
General Characteristics
- Successors 5 airplane(s) +42 bonus
- Created On Windows
- Wingspan 1.6ft (0.5m)
- Length 3.3ft (1.0m)
- Height 3.7ft (1.1m)
- Empty Weight 813lbs (369kg)
- Loaded Weight 813lbs (369kg)
Performance
- Wing Loading N/A
- Wing Area 0.0ft2 (0.0m2)
- Drag Points 512
Parts
- Number of Parts 111
- Control Surfaces 0
- Performance Cost 514
@marcox43 could you make a fan on the pully?
@Nathangaming82075 you have to Disconnect and Manually position it via toolbar, also manually add connections, that's how I built that engine isn the first place, since the tolerances are very tight and it would clip on everything if built traditionally.
@marcox43 I tried, it just kept wanting to connect to other things
@Nathangaming82075 you can detach it and atach it to the lower pulley. I uploaded it un-atached because of clearance issues if I remember correctly.
Make the fan spin please
@marcox43 no problems
@Tauzios Thanks for the upvote, I hope you enjoy it n.n
Muhaha I'm use this enjine WISH no fuel is use piston nice
My car is Tesla I'm upgrade this I'm out this enjine in side Tesla does work conec gear wow 120hp 100speen XDD
▬▬▬.◙.▬▬▬
═▂▄▄▓▄▄▂
◢◤ █▀▀████▄▄▄◢◤
█▄ █ █▄ ███▀▀▀▀▀▀╬
◥█████◤
══╩══╩═
╬═╬
╬═╬
╬═╬
╬═╬
╬═╬
╬═╬☻/
╬═╬/▌
╬═╬/ \
@marcox43 I will indeed
@Wyalolworld thank you for the upvote! I hope you enjoy this cool experimental engine n.n
@marcox43 No problem, it's awesome
@tsampoy thank you for the upvote!
@GontarMotors thank you very much!
@ManBoe hehe, thx. currently I'm developing a V8, but I encountered a few problems regarding how to power it, due to firing order...
Nice!
And I thought I was first to be maniacal enough for this sort of thing....
Then again, I didn’t use any modded parts ;p
@Johnnyynf thank you very much!
@ZHUAREVONI yup
wow its sooooo smol baby
@BRuthless ikr, I have two with high torque, but they are quite big, as RPM's are very limited in this game, one has to compensate with bigger engines xdd, I'll tag you
@marcox43 I've been wanting to build something like this for quite some time actually. Would be better if it had more torque though, but that requires longer strokes.
@BRuthless thank you very much mate, haven't seen you in a while!
@randomusername @ACEPILOT109 thank you very much guys, I hope you enjoy this engine(quite underpowered, but good for light tasks)
@JoshuaW
@Texasfam04 thank you very much!
Np