Profile image

[CHALLENGE] 24 HOURS OF GOLD PRIX

14.3k FomahaultCoredemshau  1.1 years ago

Another Real-Life inspired challenge. So this is my first challenge i will give out to people, and the rules are pretty simmilar to F1, but dont worry, im not as strict as the FIA. Anyways, the key to winning the challenge is not reliability, but Fuel, Drivability (All of the cars tested will be driven by AI), and Speed. The cars used in this challenge must be the ones based on this design to prevent confusement (and making it more like F1 or 24 heurs du mans). Also im going to hand out the rules:

1: All cars should use this posts car
2: Minimum weight is 300kg
3: Maximum Weight is 655kg
4: XML modded engines ARE NOT ALLOWED
5: Car should not exceed 425hp
6: Engine must be the one in the car currently
7: Minimum part count is 60 parts
8: maximum part count is 280 parts
9: Maximum fuel is 110L
10: MassScale 0 is not allowed
11: No more than 2° of Camber on each wheel
12: Must be RWD
13: Using Glitches are not allowed
14: Car should only able to drive at a max of 390kmh
15: liveries are allowed, as long they dont add mass, or exceed part limit
16: Must be a successor of this build
17: LiftScale on wings to provide downforce Is NOT allowed
18: CAR MUST AT LEAST BE ALBE TO DO 5 LAPS BEFORE RUNNING OUT OF FUEL

Thats the rules.

Deadline: 25th november 2023

Race: 3rd December 2023 (Footage will be uploaded to youtube)

Ease of think: Do anything to the car than can help to improve performance, or handling, or make it able to do more laps than commpettitors

General Characteristics

  • Created On Android
  • Wingspan 5.0ft (1.5m)
  • Length 21.7ft (6.6m)
  • Height 3.8ft (1.2m)
  • Empty Weight 601lbs (272kg)
  • Loaded Weight 684lbs (310kg)

Performance

  • Wing Loading 13.2lbs/ft2 (64.5kg/m2)
  • Wing Area 51.8ft2 (4.8m2)
  • Drag Points 134

Parts

  • Number of Parts 61
  • Control Surfaces 0
  • Performance Cost 260
  • Log in to leave a comment
  • Profile image

    @FireBirdDynamics thats okay

    10 months ago
  • Profile image

    I missed this by 2 months but I'll stick try to make a car that fits the restrictions so I can learn race car building

    10 months ago
  • Profile image

    @Mage2IsTriggered oh okay then, limit increased

    1.1 years ago
  • Profile image

    @rexzion like tune it like tuning the wheels so it can turn better, or adding more power or like wings adding downforce and turning abilities so you can race better, anything that improves performance

    1.1 years ago
  • Profile image
    44.4k rexzion

    wait if we have to use the car from the post what do we do then????

    1.1 years ago
  • Profile image

    @XtarsTheExdarichGuy33106 its understandable, i would make the maxpart count go to like, 300 or so and weight top out at 2000kg, cause tuning lightweight stuff to be nimble and have a low center of gravity can be a bit of a pain

    1.1 years ago
  • Profile image
    44.4k rexzion

    seems like a fun simple challenge

    1.1 years ago
  • Profile image

    @Mage2IsTriggered probably a thing, but you know, im not that good at making such, probably the challengers actually able to make such

    1.1 years ago
  • Profile image

    Weight and part limits are too small, if you wanna make a proper suspension, the go half the parts in the low end

    1.1 years ago
  • Profile image
    13.9k Guh

    I'ma join

    1.1 years ago