I am building a car using your technology to replicate hydro-pneumatic suspension.
May I distribute the work when it is completed?
Of course, your name will be credited.
Well, I think one way is to delete or block users from such insulting comments.
But if I remove the comment or block the user, they will think I'm sorry or hurt. That's what they think and satisfy them.
And the internet is a world where you can do your free activities. I want to protect it as much as I can, and I don't want to block speech.
That's why I think I have to confront and argue against comments that are radical or insulting.
@randomusername
In the first place, just because you made a statement that you are a joke does not mean that you are no longer responsible for your statement.
It is the worst thing for a person to make a hurtful expression in a joke.
Well, now you are the point of insensitivity.
Take responsibility for your speech!
Become a person!
Then you should be a little better.
Maybe you don't understand the meaning of responsibility?
What!
You do not seem to be suitable for the Internet.
It's a pity, but how about coming back?
@Vidal99977
@AndrewGarrison The ver.1.7’s UI of “transform part”was useful. When I want to rotate a part,I could manage it by using scroll bar. When I move long length a part , I pressed an arrow key long .
But in Beta version , this intuitional operating procedures are lost.
When I want to rotate a part , I have to type a number in “rotate amount” ,and each time I want to do so. I have to tap an arrow key as many times as I want to move, as the function “long press”was disabled. And then , I want to return this “intuitional operating procedure ” in next version of mobile.
New type Transform Part UI is not easy to use for me. I need to change the old type UI.
When playing a large plane with Mobile version, I want you to lighten it because it crash and too slowly.
@klm747klm747
I apologize for my lack of consideration.
I had credited the generic work, but neglected to credit this work, which is just one of the paint variations.
You are right. The doors on the landing gear only have an appearance, they don't actually work.
However, it is important to note that this is a work without any interior.
In other words, by compromising some of the details, we can make it work comfortably on the mobile version.
Of course, I can understand why you might find this problematic. I'm hoping to add more details to the cockpit interior and landing gear within the next few months.
@Augusta81
@AndrewGarrison
Not only is 0.25 seconds too short, but I don't want this feature in the first place.
If possible, please revert to the previous specification.
When you select a tyre part or an engine part, you will see a square with an X in the top right corner of the screen.
You can write any name in the Rpm field there.
For FT, please refer to the actual product.
@CatMasterLuke
So what do you want me to do?
Even if you make a separate part for the sound, various sounds will interfere with it.
For example, a rotator for a wheel.
@DeezDucks
"GDA" is the virtual airline paint scheme given to the fictional airliners I have created.
Therefore, it is not possible to apply the "GDA" paint to a real airliner like this one.
@MRFOXY09
@Sm10684
Although we are in violation of the regulations regarding this work, we initially started working on it with the intention of participating in the Group B Challenge.
Yes, you are right when you say it is slightly smaller.
However, the dimensions are based on the real thing, so it is probably just a margin of error.
@Chancey21
So, to begin with, it is not a joke when there is nothing twisted about it.
His act was nothing more than a prank, desecrating the dead and leaving a comment that offended me.
@ForwardUntoDawn
I am uncomfortable.
+1How can you make such a comment?
@malumuteanaerospace
I am building a car using your technology to replicate hydro-pneumatic suspension.
+1May I distribute the work when it is completed?
Of course, your name will be credited.
Unfortunately, they collided …
+1@realSavageMan
Oops, I forgot to activate the gyro on AG5.
+1Thanks for the advice.
@Grob0s0VBRa
I'm looking forward to seeing your jumbos!
+1@realSavageMan
Very very Nice!
+1Awesome!
This type of JAL paint job is the best!
I don't mean to be presumptuous, but I took a photo of it side by side with my JAL aircraft.
+1It's a great picture when you have aircraft from the same era and the same airline!
This song is a version of a duet by Japanese singers Eiichi Otaki and Celia Paul.
+1@PanKlex204
I'm sorry, but I'm not likely to be of any help to you.
That's because my Walker relies on Nagisa's for its internal mechanism.
Nagisa mentioned above is a professional when it comes to Funky Tree, so I think one way to ask him is to visit his page.
@Vincent_
+1It's okay.@TheTyphoon
+1I'm working on some froggy ice.
+1We need to make sure we don't fail to freeze them.
@exosuit
You've found yourself to be the ultimate in insensitivity and an immature person who can't think of others at all.
So I will explain it in an easy-to-understand manner, so please read it carefully.
It's the worst thing to do if you insult a person disproportionately, and if you argue, you say "It's a joke."
When I was told, I never thought, "Oh, this was a joke." Those who are told can never forget. You will be deeply injured because of you.
You should be careful about what you say. Don't insult people as the basis of the basics. The other person should be respected.
+1@Zanedavid
Although my posts and the exchange of comments have been controversial,
+1I thank you for your support.
Thank you very much!
@randomusername
Well, I think one way is to delete or block users from such insulting comments.
+1But if I remove the comment or block the user, they will think I'm sorry or hurt. That's what they think and satisfy them.
And the internet is a world where you can do your free activities. I want to protect it as much as I can, and I don't want to block speech.
That's why I think I have to confront and argue against comments that are radical or insulting.
@randomusername
In the first place, just because you made a statement that you are a joke does not mean that you are no longer responsible for your statement.
It is the worst thing for a person to make a hurtful expression in a joke.
Well, now you are the point of insensitivity.
Take responsibility for your speech!
Become a person!
Then you should be a little better.
Maybe you don't understand the meaning of responsibility?
+1What!
You do not seem to be suitable for the Internet.
It's a pity, but how about coming back?
@Vidal99977
Two words you should know
+1morality&Etiquette
@Aerofy
Why? I love jumbo jets!
+1@DuckPak
here@MegaFox
+1@AndrewGarrison The ver.1.7’s UI of “transform part”was useful. When I want to rotate a part,I could manage it by using scroll bar. When I move long length a part , I pressed an arrow key long .
+1But in Beta version , this intuitional operating procedures are lost.
When I want to rotate a part , I have to type a number in “rotate amount” ,and each time I want to do so. I have to tap an arrow key as many times as I want to move, as the function “long press”was disabled. And then , I want to return this “intuitional operating procedure ” in next version of mobile.
New type Transform Part UI is not easy to use for me. I need to change the old type UI.
+1When playing a large plane with Mobile version, I want you to lighten it because it crash and too slowly.
It’s a free fall
+1@Strikefighter04
Yes this plane is full scale
+1@ForeverPie
@F14FANATIC ok
Trace source
@Brayden1981
Click here for nonmovable figures
「」
T
@klm747klm747
I apologize for my lack of consideration.
I had credited the generic work, but neglected to credit this work, which is just one of the paint variations.
Nice
You are right. The doors on the landing gear only have an appearance, they don't actually work.
However, it is important to note that this is a work without any interior.
In other words, by compromising some of the details, we can make it work comfortably on the mobile version.
Of course, I can understand why you might find this problematic. I'm hoping to add more details to the cockpit interior and landing gear within the next few months.
@Augusta81
@AndrewGarrison
Not only is 0.25 seconds too short, but I don't want this feature in the first place.
If possible, please revert to the previous specification.
Thanks
@Johnnyynf
this
@CatMasterLuke
When you select a tyre part or an engine part, you will see a square with an X in the top right corner of the screen.
You can write any name in the Rpm field there.
For FT, please refer to the actual product.
@CatMasterLuke
The appearance of the object should at least match the hit detection.
@Augusta81
Alfa Romeosh
So what do you want me to do?
Even if you make a separate part for the sound, various sounds will interfere with it.
For example, a rotator for a wheel.
@DeezDucks
I have omitted the explanation of the operating system, but AG8 corresponds to the ignition switch.@DeezDucks
This one is cooler https://www.simpleplanes.com/a/utOW3q/German-Corsair
This one is cooler https://www.simpleplanes.com/a/utOW3q/German-Corsair
This one is cooler https://www.simpleplanes.com/a/utOW3q/German-Corsair
"GDA" is the virtual airline paint scheme given to the fictional airliners I have created.
Therefore, it is not possible to apply the "GDA" paint to a real airliner like this one.
@MRFOXY09
@Sm10684
Although we are in violation of the regulations regarding this work, we initially started working on it with the intention of participating in the Group B Challenge.
I'm looking forward to it!
@WNP78
Can you please tell me the detailed Unity version?
Nice
Yes, you are right when you say it is slightly smaller.
However, the dimensions are based on the real thing, so it is probably just a margin of error.
@Chancey21
Soft top only
Retractable Fastback only
So, to begin with, it is not a joke when there is nothing twisted about it.
His act was nothing more than a prank, desecrating the dead and leaving a comment that offended me.
@ForwardUntoDawn