For the grille, use single line fuselages for the horizontal bars and hollow fuselages for the vertical bars. This might help reduce part count.
.
By the way, what made the part count so high?
@OUGHTO, reformers were a group of military officials who thought that the US armed forces were addicted to high-end, expensive technology and campaigned for inexpensive low-tech vehicles to be put in service, kind of like wanting the US armed forces to adopt the Soviet doctrine of quantity over quality (something the US armed forces is unwilling, due to also how expensive their trained soldiers are). This particular plane, a very technologically advanced but also ludicrously expensive fighter aircraft might make the reformers "cry in tears", hence the title.
.
Also, please do not use profanity on this site. :)
@hela, to start a new one, click on the plane in an octagram and then you can build planes from there.
@hela, it is recommended you use an adequate machine translator to communicate with people who primarily speak in another language. By that, you don’t have to wait for people to use a machine translator to respond. :)
.
@hela，建议您使用合适的机器翻译器与主要使用另一种语言的人进行交流。这样，您就不必等待人们使用机器翻译来响应。 :)
You are not shadowbanned. I can see this forum post and some of your comments. Usually, low rank users have fewer comments in their builds because they are less known than the most well known builders here. To become known, you must be more active in the community, commenting on other people’s builds, helping those in need (it’s not obligatory, if you can not help then move on), as well as being more active on the forums. Just follow the rules, so you won’t get into trouble.
.
A very detailed and high quality build of yours might become a candidate to become featured, but it naturally takes a lot of time and effort. A meme build could propel you to known status, but it is risky and you might end up creating an offensive build that warrants removal due to it breaking the rules. I wouldn’t recommend you exploit controversy to gain fame as it will usually end up, badly.
@IMFLYINHERE, unfortunately, I will not reveal the names to prevent “witch hunts”. That’s all I can say. No need for further discussion regarding that.
@omer13, why are you asking me for my comments? Are you expecting me to review this build of yours, that needs to have the wingtips tapered, fuselage smoothing, and an improved canopy. I see why, you don’t get enough visitors. I also quite don’t get enough visitors.
@BaconAircraft, sorry, but what I actually meant was if the product LOOKS more utilitarian than others, not it being more utilitarian than others. I have edited my previous comment to clarify such.
If you are going to build an aeromorph build, please do so on your own volition. Do not expect an amount of hate and drama in the comments section of any aeromorph build, as in every humanoid build types that can sometimes cause controversy like “anime girl” builds. Also do not expect that afterwards, the comments section will be “closed” when the controversy persists.
.
Note that this should NOT be used as an excuse to post builds that violate the rules; they are here for the good of the community.
Nice. The primary intake needs to be replaced by a curve that aligns to the propeller, since there is another intake at the bottom that can prove crucial to an aircraft’s speed (see “Meredith Effect” for more information).
@Spitfirelad05, no, it wasn’t named after Belka. It is a portmanteau of the words “Bell” and “Hellcat” that I made up; soon it evolved to me using the long name, “Bellkitsu” while “Bellcat” became my shortened name. I like it because it’s spelling was suitable and the sound was mildly comforting, while being easy and recognizable at the same time.
@XtarsAgency, use the code to put an image on the site: 
You need an image hosting platform; postimgs is a good site for such.
Hope this helps.
I can ascertain this as a joke, due to the ridiculousness of the story. If you believe this is true, send us a non-edited picture so we can investigate it. Thanks.
The thumbnail made me concerned it may be removed for having a “misleading thumbnail”.
That’s a decent A-10 replica. However, I think you might need hollow fuselages covering the the main engines to make it look even better.
@Warboy, you took 11 months to respond. Should have been minutes or a day.
That’s nice. I bet the big hat on top of the plane is gonna ruin the aerodynamics of the plane.
For the grille, use single line fuselages for the horizontal bars and hollow fuselages for the vertical bars. This might help reduce part count.
.
By the way, what made the part count so high?
This is a good replica. Sadly, the stabilizers are not fuselage wings.
Did you really make it? It has a decent interior but horrible looks.
Glorious nippon sword. Can be used by large mecha builds!
@shoot4942, I am more comfortable creating fictional creations than replicas.
How detailed is this? Nice! I think you are using a very high end computer to create this.
.
Can you create a simple T-18 tank?
@OUGHTO, reformers were a group of military officials who thought that the US armed forces were addicted to high-end, expensive technology and campaigned for inexpensive low-tech vehicles to be put in service, kind of like wanting the US armed forces to adopt the Soviet doctrine of quantity over quality (something the US armed forces is unwilling, due to also how expensive their trained soldiers are). This particular plane, a very technologically advanced but also ludicrously expensive fighter aircraft might make the reformers "cry in tears", hence the title.
.
Also, please do not use profanity on this site. :)
@hela, to start a new one, click on the plane in an octagram and then you can build planes from there.
@hela, it is recommended you use an adequate machine translator to communicate with people who primarily speak in another language. By that, you don’t have to wait for people to use a machine translator to respond. :)
.
@hela，建议您使用合适的机器翻译器与主要使用另一种语言的人进行交流。这样，您就不必等待人们使用机器翻译来响应。 :)
Nice ground-effect craft, likely used for the civilian market due to it’s looks. I like the detailing, especially the framing around the canopy.
And so, you have made a moe anthropomorphism of SimplePlanes, I see... Andy Gary, somebody make this a mascot!
Nice. Hope it goes well.
@StugnaATGM, oh sorry. I have edited my previous comment.
Ah, that’s one nice, 4th generation aircraft you got there.
Quite nice additions to the cockpit though.
Except that there are rules to follow when discussing here; said rules apply to everywhere on this website, including this particular forum post.
You are not shadowbanned. I can see this forum post and some of your comments. Usually, low rank users have fewer comments in their builds because they are less known than the most well known builders here. To become known, you must be more active in the community, commenting on other people’s builds, helping those in need (it’s not obligatory, if you can not help then move on), as well as being more active on the forums. Just follow the rules, so you won’t get into trouble.
.
A very detailed and high quality build of yours might become a candidate to become featured, but it naturally takes a lot of time and effort. A meme build could propel you to known status, but it is risky and you might end up creating an offensive build that warrants removal due to it breaking the rules. I wouldn’t recommend you exploit controversy to gain fame as it will usually end up, badly.
@IMFLYINHERE, unfortunately, I will not reveal the names to prevent “witch hunts”. That’s all I can say. No need for further discussion regarding that.
I do not know. At one time, EternalDarkness was the most well known moderator.
Ah, nice. Might do in MP.
Now can it draw a straight line in the sky?
Simpleplanes calligraphy in it’s finest. :)
And if anything is outside that circle wnp mentioned, it becomes white as it is unrendered.
@beenz, the now 3D historical infographics show.
@omer13, why are you asking me for my comments? Are you expecting me to review this build of yours, that needs to have the wingtips tapered, fuselage smoothing, and an improved canopy. I see why, you don’t get enough visitors. I also quite don’t get enough visitors.
Looks like what I can create, especially how the character moves when I press motion keys (I.e. WASD).
Nice train. You appear to be a youtube creator, aren’t you?
I have tried to connect to MP, but it does not work because of the “failed to connect” error.
@PlaneFlightX, actually I think there is no need to restate the link again, since I already know it’s there, but thanks.
That’s pretty nice, mobile friendly too. I would like the wheels’ width to be “flush” with one another.
@BaconAircraft, sorry, but what I actually meant was if the product LOOKS more utilitarian than others, not it being more utilitarian than others. I have edited my previous comment to clarify such.
This looks like what a military contractor would design in the 21st century.
I bet you worked hard on the nose of this craft. By the way, it looks kind of like a squashed P-51.
If you are going to build an aeromorph build, please do so on your own volition. Do not expect an amount of hate and drama in the comments section of any aeromorph build, as in every humanoid build types that can sometimes cause controversy like “anime girl” builds. Also do not expect that afterwards, the comments section will be “closed” when the controversy persists.
.
Note that this should NOT be used as an excuse to post builds that violate the rules; they are here for the good of the community.
@rexzion, because, people...
.
Joke Ruining Spoiler
Because the forums section is obviously made for forums.
The depicted mecha is coming from Western mecha design, distinguishable from their Japanese peers.
Nice. The primary intake needs to be replaced by a curve that aligns to the propeller, since there is another intake at the bottom that can prove crucial to an aircraft’s speed (see “Meredith Effect” for more information).
@DatRoadTrainGuy19, they are already back and you can still visit their profiles.
MECHWARRIOR
The Anime
@Spitfirelad05, no, it wasn’t named after Belka. It is a portmanteau of the words “Bell” and “Hellcat” that I made up; soon it evolved to me using the long name, “Bellkitsu” while “Bellcat” became my shortened name. I like it because it’s spelling was suitable and the sound was mildly comforting, while being easy and recognizable at the same time.
Can’t wait to test what it does. What different AGs trigger different functions?
@XtarsAgency, use the code to put an image on the site:
You need an image hosting platform; postimgs is a good site for such.
Hope this helps.
I can ascertain this as a joke, due to the ridiculousness of the story. If you believe this is true, send us a non-edited picture so we can investigate it. Thanks.
He, that’s nice... XD
.
candy
@GabrielSatori, like how can it do overdrive?
What license will you use for the documentation? Will it be like GPL?