Woah, this is amazing! The shape is spot on, I had to look twice to see if the screenshots were from real life! The gear is sweet too, I can imagine that it took a while to get the angles right
Looks amazing! The only problem I have is that there are square gaps in the haze. I'm not really sure how to describe it, but if you need a picture I can show you over discord
True. In warthunder, the TA-154 had both props spinning the same direction, so I just copied that. But thanks for the feedback and support! @ollielebananiaCFSP
@edensk Lol. Would it be ok with you if I borrowed your pilot figure for an F-4 Phantom I'm working on? I would give credit and be sure to keep him safe ;P
Super cool design! This is the best XF-11 on the site, by far. There are a few problems though. Firstly, I'd just like to say this is constructive criticism and I mean no hard feelings. That being said, lets begin:
- It can't track straight on the runway. I would imagine this has to do with either the cockpit, or not building with 0 mass and drag parts from the beginning. That, coupled with the slow nose wheel and nothing to reduce its effect at high speed, makes it hard to keep straight on takeoff and landing.
- There are gaps, almost everywhere. Most notably on the gear doors, but there are many areas that can be smoothed out more
- Part efficiency, or lack thereof. While the custom engines and props are cool, they aren't needed. 128 parts for just the prop blades(can be done with 4) probably 400 parts for each engine (can be done with 2) , 20 parts for the exhaust pipes alone (can be done in less than 5), probably 250 parts for each roundel (can be done in maybe 50 at most), 20 parts for black lines on spoilers (can be done in 2), 400 parts for gauges you cant even see as they're behind the seat, etc...
- Smaller details are neglected. There is part of the glass canopy showing into the nose wheel well. There are hinges connected to nothing in the main gear wells. Intakes lead to nowhere. There should have been a solid black wall in there to simulate depth. There's a random fuselage hanging off the back of the left boom?
- Flight performance. It turns better than most fighters. Keep in mind this plane was bigger than the Lockheed Constellation, shown in this picture yet it turns faster than a P-51. No wonder the wings break off so easily. Speaking off, that's another not needed feature. It complicated the whole plane, and adds parts to the wing as you have to build two that are connected, rather than just one big wing.
- Paint. It's very bland. It's hard to tell from pictures as they are mostly black and white, but from the few color pictures, the plane is more of a grey/aluminum color, not white. A few ticks darker in the paint menu, and a touch more metallic would've fixed this. Also, the engine is painted white, which makes it hard to notice it. Plus its all white, so its even harder to notice the 400+ parts worth of detail
I feel bad for critiquing so much, I can only imagine how much effort you put into this build. I estimate tha
Awesome! I love the detail, it's wonderful. If it's alright with you, could I borrow the ammunition gauge for a project of mine? I will be sure to give full credit
Woah, this is going to turn out amazing when it’s finished! Just the body work is stunning, I can’t wait to see what funky tree magic you incorporate too
Woah, this is amazing! The landing gear, the shape, the cockpit, its just all perfect. Great work once again!
Who you gonna call? Tank busters!
Very interesting!
+1Woah that fuselage looks amazing! I know those triangular shapes are a nightmare to make, I just can’t believe how smooth you’ve gotten them!
Woah, this is amazing! The shape is spot on, I had to look twice to see if the screenshots were from real life! The gear is sweet too, I can imagine that it took a while to get the angles right
Looks amazing! The only problem I have is that there are square gaps in the haze. I'm not really sure how to describe it, but if you need a picture I can show you over discord
Awesome job! The rims are my favorite part
woah. I honestly have no other words. I can't believe this is SP!
For big mods that make computer go brr
Great job! It looks great!
Stunning work! The way the gear retracts is just amazing, it’s so smooth and well made. Great job dude, keep up the great work!
Wow, that looks amazing! I can’t wait to give it a spin
Thank you very much! I appreciate it @EpicPigster1
Lookin great! The Bearcat is my favorite plane, so I can't wait to try it out
Awesome job! It’s amazing to see what’s possible with funky trees
I love the attention to detail on the wings and tail! It really looks like it’s made of fabric
True. In warthunder, the TA-154 had both props spinning the same direction, so I just copied that. But thanks for the feedback and support! @ollielebananiaCFSP
Thank you very much! @Hedero @LoafOfBread @bossboy678905
@edensk Thanks!
@edensk Lol. Would it be ok with you if I borrowed your pilot figure for an F-4 Phantom I'm working on? I would give credit and be sure to keep him safe ;P
+2Absolutely perfect. Just the level of detail, the flight performance, the livery; everything is just perfect
+1@PoinX25tlessWhyShouldI I do, its CRJ900Pilot#6712
Absolutely stunning! Congrats on 70k!
Super cool design! This is the best XF-11 on the site, by far. There are a few problems though. Firstly, I'd just like to say this is constructive criticism and I mean no hard feelings. That being said, lets begin:
- It can't track straight on the runway. I would imagine this has to do with either the cockpit, or not building with 0 mass and drag parts from the beginning. That, coupled with the slow nose wheel and nothing to reduce its effect at high speed, makes it hard to keep straight on takeoff and landing.
- There are gaps, almost everywhere. Most notably on the gear doors, but there are many areas that can be smoothed out more
- Part efficiency, or lack thereof. While the custom engines and props are cool, they aren't needed. 128 parts for just the prop blades(can be done with 4) probably 400 parts for each engine (can be done with 2) , 20 parts for the exhaust pipes alone (can be done in less than 5), probably 250 parts for each roundel (can be done in maybe 50 at most), 20 parts for black lines on spoilers (can be done in 2), 400 parts for gauges you cant even see as they're behind the seat, etc...
- Smaller details are neglected. There is part of the glass canopy showing into the nose wheel well. There are hinges connected to nothing in the main gear wells. Intakes lead to nowhere. There should have been a solid black wall in there to simulate depth. There's a random fuselage hanging off the back of the left boom?
- Flight performance. It turns better than most fighters. Keep in mind this plane was bigger than the Lockheed Constellation, shown in this picture yet it turns faster than a P-51. No wonder the wings break off so easily. Speaking off, that's another not needed feature. It complicated the whole plane, and adds parts to the wing as you have to build two that are connected, rather than just one big wing.
- Paint. It's very bland. It's hard to tell from pictures as they are mostly black and white, but from the few color pictures, the plane is more of a grey/aluminum color, not white. A few ticks darker in the paint menu, and a touch more metallic would've fixed this. Also, the engine is painted white, which makes it hard to notice it. Plus its all white, so its even harder to notice the 400+ parts worth of detail
I feel bad for critiquing so much, I can only imagine how much effort you put into this build. I estimate tha
Thank you very much, @EternalDarkness I appreciate it!
@EternalDarkness
Could you make this a successor of this challenge please?
Awesome, this paint scheme is super simple, but really shows off the plane’s lines
Ah ok. It’s still amazing that you’re able to make mods like this @MOPCKOEDNISHE
This is revolutionary! It should be in the stock game. Will it work with the smooth front and smooth back feature?
+1Superb! The level of detail, is just, woah... Well done, I can't wait to see what you have planned next
Awesome! I love the detail, it's wonderful. If it's alright with you, could I borrow the ammunition gauge for a project of mine? I will be sure to give full credit
I've been tricked, backstabbed, and quite possibly bamboozled
+2Wait, this is SimplePlanes?!? It looks so real!
+1Sure, I can give it a shot. Anything in mind?
+1Woah, this is going to turn out amazing when it’s finished! Just the body work is stunning, I can’t wait to see what funky tree magic you incorporate too
+1Woah, this is bootiful
Hmm, weird. I’ll give that a try @WNP78
Yeah that’s the problem I’m having, but with a stick and throttle. @BagelPlane
Nice bomber!
Thanks anyway @ACEPILOT109
I have them hooked up to an adapter multi USB adaptor. I’ll try connecting both directly to the computer @Gluck
Thanks lol @UltraLight
@AndrewGarrison
@WNP78
Looks great!
Nice! Thanks so much for building this for me
Amazing! I love the landing gear
Maybe the rotor chopped it off lol @ACEPILOT109
Cool! It looks like it would need a bigger rudder to counteract the torque though
+1Awesome! That radar dish is super cool!
Woah, I think this is your best cockpit yet! And the detail on the pilot is amazing too!
+1