@Robomo119DerMustangKiller this one is clearly hermetically sealed and the scratch off looks intact. And why would you buy one from someone who wont let you look at the back. Thats why this one rotates
@Robomo119DerMustangKiller i agree that Fortnite is a worthless game. But $19 still goes for $19 in the real world. Sure, it doesn't get you much in game, buy the card goes for how much it says its worth. And thats $19.
@goboygo1 depending on the contour, some are separate. But I have to carefully nudge and turn each one o be as close to the fuselage as possible and each line takes 10-15 minutes. The nose took a bit over an hour and a half. Still have every bit of silver to do. I'm going for the look of bare metal and a wrap. So the coloured portions cover up the rivets beneath. Going a different direction than the Könstflyg-8, my previous aircraft.
So uhh, is there a fast way to making panel lines or is it just gonna be a week of me suffering as I carefully bend each and every label to fit closely around the body of my airplane as I slowly start to weep. Also, @jundroo gotta add a cursive font.
@GrandmasterPotato sound like a plan, I'd recommend starting off with the control surfaces. Add a smoothing command to the rotators so they move more naturally. You can copy the code from the hinges in my KÖNTFLYG-8 and edit the perameters as you see fit.
@GrandmasterPotato that just means you finished early. Since the deadline is the 25th of may. You could spend time adding a paint job, details, more I interior, flaps, panel lines, etc. There's a million things you can do to secure a winning place with over a month to experiment with it.
@SourDoughBread
I'm going for a mid 50s concept style twin engine that would basically be the runabout boat of the sky, a cruiser that can be handled like a sportster in the right hands.
I'm trying to nail the feeling of the staple 1950s heft... Not dissimilar to any car of the era, where it's both powerful and heavy. Since you're wanting vr compatibility, I'm assuming that is what you'll be using. so I'm making a plane entirely built around conveying the feeling of weight through the game, and what better than a steel hulled sky Cadillac. I'm also trying to keep it a little sporty because I want you to try the "club stall" which my grandfather invented at the Duluth airshow in 1971.
@Bhifegihbgfe I forgot to mention THE EVENTUALL DEGREDATION OF ALL MATTER AND ENERGY IN THE UNIVERSE MAKES EVERYTHING SEEM PRETTY USELESS IN THE GRAND SCHEME OF THINGS AND MAYBE WE SHOULD STOP TO SMELL THE ROSES EVERY NOW AND AGAIN BECAUSE THAT SOUNDS PRETTY NICE I THINK!
The mirrors are a bit goofy, looks like Shrek ears. But still an insanely cool and detailed build. Only things I would change are the side view mirrors and the wheel well scrub depth.
I didn't find anything outside of Wikipedia corroborating the part about a 2 seat minimum. And it appears that other sites did list homebuilt, gliders, hobby, farm, aerobatic one seaters as GE as long as they meet safety and weight regulations as well as a slew of things in a handbook pdf.
If it's not too much of an issue, I would like to build a one seater as it doesn't seem to stray from ge requirements.
So, why ain't ya gold yet? Cause this is gold level shit right here. I don't care what people say, you can make the most beautiful and detailed plane ever but it won't top this lol.
Good work making it to your teens 👍. Got a long road ahead of ya mate. Only advice I can give is keep the screams inside your head when you go to high school in a year or so.
@GorillaGuerrilla that's basically saying I'm stupid, but become smarter and smarter as time passes. Then my smart self decides to clean up and revert to ape brain. Lol
This is gonna be interesting. Bit you might want to make sure people post as a predecessor. I've seen 5 entries in the wild already and none led back here.
@MobileGamer21 I'd also like to have the fuselage blocks have meshes that can be modified and messed with so it's easier to make some of the hardest parts in sp... Compound curves.
@MobileGamer21 I was thinking more like making fuselages rounder, since they have something like 36 faces and a shader to make it look smooth, same with cones but the have 8 faces for the cone curvature.
@MobileBuilder21 thanks mate👍
@KenzarAircraft exactly like wart hunter.
@Robomo119DerMustangKiller thats what IM saying.
@Robomo119DerMustangKiller this one is clearly hermetically sealed and the scratch off looks intact. And why would you buy one from someone who wont let you look at the back. Thats why this one rotates
@Robomo119DerMustangKiller i agree that Fortnite is a worthless game. But $19 still goes for $19 in the real world. Sure, it doesn't get you much in game, buy the card goes for how much it says its worth. And thats $19.
@Robomo119DerMustangKiller i may be wrong... But i think $19 USD converts roughly to $19 USD. I could be wrong though. And theres postage fees.
@32 at least the link itself seems to work.
@32 fun
@Dragoranos yeah I've tried every symbol so far and nothing. The link itself seems to work though.
@SourDoughBread 3 hours and only got the nose.
@SourDoughBread oh no.
@32 did it work? I can't see the image.
@goboygo1 depending on the contour, some are separate. But I have to carefully nudge and turn each one o be as close to the fuselage as possible and each line takes 10-15 minutes. The nose took a bit over an hour and a half. Still have every bit of silver to do. I'm going for the look of bare metal and a wrap. So the coloured portions cover up the rivets beneath. Going a different direction than the Könstflyg-8, my previous aircraft.
So uhh, is there a fast way to making panel lines or is it just gonna be a week of me suffering as I carefully bend each and every label to fit closely around the body of my airplane as I slowly start to weep. Also, @jundroo gotta add a cursive font.
@GrandmasterPotato sound like a plan, I'd recommend starting off with the control surfaces. Add a smoothing command to the rotators so they move more naturally. You can copy the code from the hinges in my KÖNTFLYG-8 and edit the perameters as you see fit.
No stealing mate.
Not nearly big enough!
@GrandmasterPotato that just means you finished early. Since the deadline is the 25th of may. You could spend time adding a paint job, details, more I interior, flaps, panel lines, etc. There's a million things you can do to secure a winning place with over a month to experiment with it.
Seems to be square, too.
@SourDoughBread
I'm going for a mid 50s concept style twin engine that would basically be the runabout boat of the sky, a cruiser that can be handled like a sportster in the right hands.
I'm trying to nail the feeling of the staple 1950s heft... Not dissimilar to any car of the era, where it's both powerful and heavy. Since you're wanting vr compatibility, I'm assuming that is what you'll be using. so I'm making a plane entirely built around conveying the feeling of weight through the game, and what better than a steel hulled sky Cadillac. I'm also trying to keep it a little sporty because I want you to try the "club stall" which my grandfather invented at the Duluth airshow in 1971.
@SourDoughBread thanks, also I'll try and live up to the realistic flight characteristics you want out of the challenge.
@Bhifegihbgfe I forgot to mention THE EVENTUALL DEGREDATION OF ALL MATTER AND ENERGY IN THE UNIVERSE MAKES EVERYTHING SEEM PRETTY USELESS IN THE GRAND SCHEME OF THINGS AND MAYBE WE SHOULD STOP TO SMELL THE ROSES EVERY NOW AND AGAIN BECAUSE THAT SOUNDS PRETTY NICE I THINK!
@SourDoughBread can you answer my question from yesterday?
@asteroidbook345 nah I'm making a twin engine single seat hobby sport plane.
@Bhifegihbgfe I forgot to mention THE GREAT ATTRACTOR.
The mirrors are a bit goofy, looks like Shrek ears. But still an insanely cool and detailed build. Only things I would change are the side view mirrors and the wheel well scrub depth.
I mean GA, not GE. My apologies
I didn't find anything outside of Wikipedia corroborating the part about a 2 seat minimum. And it appears that other sites did list homebuilt, gliders, hobby, farm, aerobatic one seaters as GE as long as they meet safety and weight regulations as well as a slew of things in a handbook pdf.
If it's not too much of an issue, I would like to build a one seater as it doesn't seem to stray from ge requirements.
@Bhifegihbgfe boi my BUwU-36 can carry 3 TBs and a reactor!
@Bhifegihbgfe OR WHAT?!?
I mean, they're all fictional ?
@OwO
Pres: ENHANCE.
Soldier: Sir, that's not how image enhancement works.
Pres: BUT MY $19 FORTNITE CARD!
+1If the code on the back worked...
+1My worst enemy, the bacon machine, the mig.
oxyacetylene is where it's at. Hehehehehehehehe tiny sun go ffffffffssssssshhhhhhhhhhhhhhhh.
@Brionne naw it's pretty cool actually but pokemon are just cursed imo. You did good work.
WHERES THE HEAVENLY CLEANSING FIRE
DEAR GOD
So, why ain't ya gold yet? Cause this is gold level shit right here. I don't care what people say, you can make the most beautiful and detailed plane ever but it won't top this lol.
+3Mobile game ads: cod modern soldier
+2@CZmoqi literally.
@IAlsoBuildPlane let's settle this on win XP, back when Microsoft was pure and innocent.
+1@GorillaGuerrilla oh shit it clean, I'm a doofus!
@Rocketguy2079 turning 22 tomorrow, I'm... Jazzed.
+1Good work making it to your teens 👍. Got a long road ahead of ya mate. Only advice I can give is keep the screams inside your head when you go to high school in a year or so.
@IAlsoBuildPlane blackberry w, rip blackberry and blackberry OS tho.
+1@GorillaGuerrilla that's basically saying I'm stupid, but become smarter and smarter as time passes. Then my smart self decides to clean up and revert to ape brain. Lol
+1@IAlsoBuildPlane windows 7 w, windows 8 m, windows 10 L, windows 11L. Linux perfect.
+1This is gonna be interesting. Bit you might want to make sure people post as a predecessor. I've seen 5 entries in the wild already and none led back here.
Also is there a deadline or is it still TBA
@MobileGamer21 I'd also like to have the fuselage blocks have meshes that can be modified and messed with so it's easier to make some of the hardest parts in sp... Compound curves.
@MobileGamer21 I was thinking more like making fuselages rounder, since they have something like 36 faces and a shader to make it look smooth, same with cones but the have 8 faces for the cone curvature.