@SlowSeline82 The plan annotated on the homepage has not been updated for a long time, and I am not very fond of using it. Only Notice will annotate it when I have something to do.
@SlowSeline82 Sorry, there have been too many projects during this period, including 767-300F, Gold Special, and MD-11F renovation for FedexGuy. I really don't have time to help you make the plane.
@GalacticaAsia When retracting the landing gear of 747-400, the retraction direction of the landing gear is opposite to the normal direction, and the horizontal tail of 757-200 does not move up or down during control.
@Brololxd I have included the production of the 767-300F in my plan, but due to the busy schedule of too many projects in the past two weeks, I did not produce it. I plan to start production in two weeks because I am preparing to produce the 767-200 BDSF and my Gold Special next week
@SlowSeline82 Sure, but I have too many projects this week, including helping you create a DC-10 Twin for SAS and a 767-200 BDSF. I will help you create it next week.
@SlowSeline82 I will help you complete the stripe and gray bottom coating parts of the DC-10 Twin for the SAS-Scandinavian Airlines System, and add some details. It can be completed by next Friday local time (Except for the stripe markings on doors L1 and R1, which are too complex to produce.), and the airline logo is made by you, is that okay?
It's okay, I remember yesterday, @SlowSeline82 asked me in the comments section of Condor DC-10 I posted, can I help him create a DC-10 Twin?, But I didn't reply because I was busy making other works at the time, and it wasn't until later that I saw the comments he posted.
@NoblePlanesLTD I use the Volume Cloud module on my computer to take screenshots of my work, and then publish it on my phone. However, sometimes my work gets too stuck and I release it on my computer.
Credits
@GalacticaAsia's A340-600
@Brololxd Congratulations on having 90 followers🎉🎉
Credits: @GalacticaAsia's (Updated)B767-300ER[PW]
Credits: @GalacticaAsia's (Updated)B767-300ER[GE]
@AnottUzername I used this map module, and the module link is here
@GalacticaAsia Okay, and thank you for taking the time out of your busy schedule to reply.
+2Credits: @GalacticaAsia's (Updated)B767-300ER[PW]
Credits: @GalacticaAsia's (Updated)B767-300ER[GE]
@FatPilotOne Can you make LCPD Maverick for GTA Liberty City Stories?
@GalacticaAsia I found that the lower body of the L2 and R2 doors of the 767-300 is not properly connected to the rear body, with a noticeable gap.
@SlowSeline82 The plan annotated on the homepage has not been updated for a long time, and I am not very fond of using it. Only Notice will annotate it when I have something to do.
@SlowSeline82 Sorry, there have been too many projects during this period, including 767-300F, Gold Special, and MD-11F renovation for FedexGuy. I really don't have time to help you make the plane.
@eaearthur015 VARIG VARIG VARIG
@FedexGuy I am currently helping you with the MD-11F, but I have many more projects this week. I will give you the modified aircraft in two weeks
CONGRATS ON GOLD!!!🎉
+1@Gestour Okay, and thank you!
+1@NoblePlanesLTD thank you for saying so😊
@NoblePlanesLTD I took screenshots of airplanes using a map module on my computer and then posted my work on my phone.
Credits: @GalacticaAsia's (Updated)B767-300ER[GE]
Credits: @GalacticaAsia's (Updated)B767-300ER[PW]
@MAPA You're welcome.
@MAPA Wishing you a happy 50k!!!
@Gestour How can I use this to update my work?
+1@GalacticaAsia I would like to ask a question, will the windows in your future works use lights or labels?
@GalacticaAsia When retracting the landing gear of 747-400, the retraction direction of the landing gear is opposite to the normal direction, and the horizontal tail of 757-200 does not move up or down during control.
@GalacticaAsia Just now I found that all 747-400 front landing gears have bugs, and there are issues with the trim part of 757-200
CONGRATS ON 10K!!!🎉
+1@SlowSeline82 I have completed the DC-10 Twin for SAS, here is the link
Reworked version has been released, link here
Reworked version has been released, link here
Reworked version has been released, link here
@Brololxd I have included the production of the 767-300F in my plan, but due to the busy schedule of too many projects in the past two weeks, I did not produce it. I plan to start production in two weeks because I am preparing to produce the 767-200 BDSF and my Gold Special next week
+1@SlowSeline82 Sure, but I have too many projects this week, including helping you create a DC-10 Twin for SAS and a 767-200 BDSF. I will help you create it next week.
The 767-200ER with another hatch configuration has been released.
The 767-200ER with another hatch configuration has been released.
Credits: @GalacticaAsia's (Updated)B767-300ER[GE]
Credits: @GalacticaAsia's (Updated)B767-300ER[PW]
Credits: @GalacticaAsia's (Reworked)B767-300ER[GE]
@SlowSeline82 I will help you complete the stripe and gray bottom coating parts of the DC-10 Twin for the SAS-Scandinavian Airlines System, and add some details. It can be completed by next Friday local time (Except for the stripe markings on doors L1 and R1, which are too complex to produce.), and the airline logo is made by you, is that okay?
+2It's okay, I remember yesterday, @SlowSeline82 asked me in the comments section of Condor DC-10 I posted, can I help him create a DC-10 Twin?, But I didn't reply because I was busy making other works at the time, and it wasn't until later that I saw the comments he posted.
+1What happened just now?
@Jojoooo I am currently upgrading this aircraft and will release an upgraded version in a few days.
+1@BassemT90 Thank you Very much😊
@NoblePlanesLTD I use the Volume Cloud module on my computer to take screenshots of my work, and then publish it on my phone. However, sometimes my work gets too stuck and I release it on my computer.
Final tag:
@FedexGuy
Tags:
@DeadlyDialga
@SlowSeline82
@qazedcujmyhn
Tags:
@Decembermin
@BassemT90
@JJsimple
Tags:
@Bryan5
@NoblePlanesLTD
@boom1738
Tags:
@MAPA
@CL125
@CR929thenewSPplayer
Tags:
@LM0418
@RepublicOfCursedPlanes
@Brololxd