Hi the plane is very good for a first upload although i have sum lil tips for u to play around with and use.
Try seperating the fuselage into four parts; First ewith the cockpit start from the nose and make it gradually smaller until it turns into a spike. Second and third are the inlet-to-engines maybe use fuselage inlets and let them lead to the engines. Final part is the part where the wing transitions to the fuselage, it covers the ugly gap between the center fuselage and the inlets. And as for the wings try making it a little smaller and the elevators should be as 60% the primary wing width and 80% the length and maybe give it slight anhedral or make it a little lower than the primary wing. Also the rear landing gears should be at the wing root just behind the center of mass for easier takeoff
Its really good, i like the design and how it looks but the take off is kind of a pain to deal with, plane tips over to the front when i try to take off you could fix this by moving the wings forward so the gears could also do that, and to compensate for the change of the location of the center of lift you can also make the horizontal stabilizer longer this would not only regain the original col pos but it would also increase turn radius, but overall really good plane i love it
What am i seeing
+2This could sink every shop effortlessly
+2@Rjenteissussy tysm=]
+2@IceCraftGaming thank uu:DD
+2a year late but i want concaves too
+1i lovethe colors and the build overall although i wonder what itll do when i spawn on the uss beast
+1Oh wow this is a beauty
+1why did u delete the video the video was so good
Hi the plane is very good for a first upload although i have sum lil tips for u to play around with and use.
Try seperating the fuselage into four parts; First ewith the cockpit start from the nose and make it gradually smaller until it turns into a spike. Second and third are the inlet-to-engines maybe use fuselage inlets and let them lead to the engines. Final part is the part where the wing transitions to the fuselage, it covers the ugly gap between the center fuselage and the inlets. And as for the wings try making it a little smaller and the elevators should be as 60% the primary wing width and 80% the length and maybe give it slight anhedral or make it a little lower than the primary wing. Also the rear landing gears should be at the wing root just behind the center of mass for easier takeoff
love ur build btw its fast
@Wallaby i know but wouldnt concave and more complex fuselage corner and bending make building a lot easier
Its really good, i like the design and how it looks but the take off is kind of a pain to deal with, plane tips over to the front when i try to take off you could fix this by moving the wings forward so the gears could also do that, and to compensate for the change of the location of the center of lift you can also make the horizontal stabilizer longer this would not only regain the original col pos but it would also increase turn radius, but overall really good plane i love it
This is my first jet fighter that I build
@toorbokkot it flies
@DarthAbhinav i know this is 2 years ago but arent delta winf supposed to be unstable
Stuka siren