Although the activation works to me. However, once i deactivated the button, it never goes back to the normal position. Can someone help me about this?
Hey man! I tried your creation. And that was pretty good. Although it don't have any interior views, but the physics is kinda semi-realistic. And I actually liked the exterior design.
Okay. I forgot to FREE SPIN mode the rotator on the leaf spring structure in the rear where dual axles connected. So make sure you do it because if you install any VTOL controlled parts, it will rotate also and can cause damages. Thank You
Okay. I forgot to FREE SPIN mode the rotator on the leaf spring structure in the rear where dual axles connected. So make sure you do it because if you install any VTOL controlled parts, it will rotate also and can cause damages. Thank You
Milwaukee Motorsports Jeepney is the modern styled Jeepney that can be found in Cavite (Philippines Region 4A). It is popular to its full stainless steel build.
Specs:
*22-25 seater jeepney
*4-speed transmission
*RWD
*Can be modified. Depends on the owner
*Can be used both Public and Private. And even Service.
*engine usually 4ba1, 4bc2.
*max speed. Depends on the engine or its modification.
*with its steel wheel or sometimes. Shiny classic wheels. Mostly beautiful with old ford car hubcap.
This truck also called DEKOTORA. It is a very popular modified truck in Japan and Philippines as well.
Specs:
6x4 drivetrain
Automatic transmission
Real time bucket lift
Suspenion on wheels
2400hp engine
Semi-realistic physics
Realistic axle replica build
Realistic leaf spring build
Realistic engine with gearbox build
Semi-realistic cabin build
Realistic lighting
3 cameras placed
-In the cabin
-In the gearbox
-at the top of the bucket
Controls:
Yaw (turn) - slide left/right
Max turn angle = 45°
Max speed turn = 10-15mph
Pitch (acceleration)
Silde down = reverse
Slide up = forward
MAX SPEED = 80-90MPH
Throttle (brake) = slide down
VTOL (bucket and rear wall control) =
-slide up to lift up
-silde down to make it back to its original place.
(slide down to the center of the VTOL)
WARNING:
BE CAREFUL DRIVING THIS TRUCK. IT CAN TIP OVER WHEN TURNING AT MAX SPEEDS (20MPH ABOVE)
@Minnererg yes you can. If you have to show your modified trucks from my creation, well its a good idea. You can also tag me for your creation of my RMLB FASTRAK F80.
NOTE: RMLB FASTRAK was not being compared to other real truck names. I just named it on it own.
Hi guys. I'm the creator of this jeep. I have a video timelapse of building this jeep. My youtube channel is RMLB340 CHANNEL. You can watch that video there and dont forget to like and subscribe to my channel for more videos.
@SoduFreak hello 😅
@overlord5453 Thank you very much!
+1Although the activation works to me. However, once i deactivated the button, it never goes back to the normal position. Can someone help me about this?
Hey man! I tried your creation. And that was pretty good. Although it don't have any interior views, but the physics is kinda semi-realistic. And I actually liked the exterior design.
Okay. I forgot to FREE SPIN mode the rotator on the leaf spring structure in the rear where dual axles connected. So make sure you do it because if you install any VTOL controlled parts, it will rotate also and can cause damages. Thank You
Okay. I forgot to FREE SPIN mode the rotator on the leaf spring structure in the rear where dual axles connected. So make sure you do it because if you install any VTOL controlled parts, it will rotate also and can cause damages. Thank You
@IceCraftGaming Because I tried to build bigger Jeepney than I usually build.
+1@john2468 concept pa lang naman. Sana may makagawa niyan in real
@ItsHighbraker2912 because that drag jeepney concept was never built in real. So it was fictional for now.
@MrFinny60 Ohh. Thank you
@Reen1 Your creation are awesome as well
+1@SilverStar Yeah it looks like thin. But in reality that is normal chassis here. Just ensure that they are strong enough.
@JOEMAMA07 i already deleted the 2. Because I encountered problems in the phone andI accidentally posted it 3x. Doesn't mean to do it
@Thelionslipstonight 600. De jok lang
@Thelionslipstonight proud pinoy
+1Milwaukee Motorsports Jeepney is the modern styled Jeepney that can be found in Cavite (Philippines Region 4A). It is popular to its full stainless steel build.
Specs:
*22-25 seater jeepney
*4-speed transmission
*RWD
*Can be modified. Depends on the owner
*Can be used both Public and Private. And even Service.
*engine usually 4ba1, 4bc2.
*max speed. Depends on the engine or its modification.
*with its steel wheel or sometimes. Shiny classic wheels. Mostly beautiful with old ford car hubcap.
Price:
Maybe ranges
600,000 to 2.8 Million pesos.
This truck also called DEKOTORA. It is a very popular modified truck in Japan and Philippines as well.
Specs:
6x4 drivetrain
Automatic transmission
Real time bucket lift
Suspenion on wheels
2400hp engine
Semi-realistic physics
Realistic axle replica build
Realistic leaf spring build
Realistic engine with gearbox build
Semi-realistic cabin build
Realistic lighting
3 cameras placed
-In the cabin
-In the gearbox
-at the top of the bucket
Controls:
Yaw (turn) - slide left/right
Max turn angle = 45°
Max speed turn = 10-15mph
Pitch (acceleration)
Silde down = reverse
Slide up = forward
MAX SPEED = 80-90MPH
Throttle (brake) = slide down
VTOL (bucket and rear wall control) =
-slide up to lift up
-silde down to make it back to its original place.
(slide down to the center of the VTOL)
WARNING:
BE CAREFUL DRIVING THIS TRUCK. IT CAN TIP OVER WHEN TURNING AT MAX SPEEDS (20MPH ABOVE)
Whoah! You did it! Its great and better than the original.
I appreciate your effort
@Minnererg yes you can. If you have to show your modified trucks from my creation, well its a good idea. You can also tag me for your creation of my RMLB FASTRAK F80.
NOTE: RMLB FASTRAK was not being compared to other real truck names. I just named it on it own.
Godspeed to your creation. 😁😁😁
@IarGpd salamat kabayan. Galingan mo lang sa paggawa. Magiging maganda rin yung iyo
+1Guys. Here is the video of city bus building timelapse. Hope you enjoy it. I worked really hard on that.
https://youtu.be/2clEOlKZhFE
@JetEngine2709 I installed
@JetEngine2709 Ok lang
@IarGpd kamusta kabayan?
Gamer ka din neto?
@JetEngine2709 yes. I am a Filipino.
Hi guys. I'm the creator of this jeep. I have a video timelapse of building this jeep. My youtube channel is RMLB340 CHANNEL. You can watch that video there and dont forget to like and subscribe to my channel for more videos.