@Mustang51 I made a new version of this. I took your advice and raised the headroom of the cockpit and I made it slightly easier to take off and land. So now instead of easing on the throttle to take off, you can gun it and just pitch up and your flying. Again thanks for commenting.
I noticed one thing with this, (its not your fault), the rear suspension is bottomed out. adding an extra shock in the back might help. Or if you have mods in creasing the spring strength a lot would help it a lot. I have to say, im surprised you built this so fast. It looks very clean and sleek and it still handles very well. It does go it little slower but that unavoidable because of the weight of the body. If you need any other chassis, just comment.
Decent truck, front suspension is great, and the body is very clean, although the rear suspension could use some work. When the car is sitting, the suspension is already bottomed out which a big problem for absorbing any sort of bump. Secondly, the back of the truck should have 4 link which this truck does not.
Also just be aware that this is a work in progress so there may be a few missing features or some small engineering hiccups. If you notice anything or would like to recommend an idea, please comment. Thanks.
I fixed it, the back right wheel (if looking from front) was hooked to the wrong engine causing the left side to lose power and therefore pull the car to the right. https://www.simpleplanes.com/a/YUfwqf/Aircraft10
I noticed your rear 4 link suspension is not functional, this could be fixed with some geometry positioning and more rotaters. The front suspension works pretty well though.
What people are doing is taking the the cockpit off, saving the the whole car as a sub assembly, creating a new plane and pasting the car sub assembly in the plane spot and putting the cockpit back on.
@TakicraftCorporation I think I learned the most on the engine page. It helped understand that u don't need to load it with detail. Just what works and looks good.
@TakicraftCorporation I wanted to make a company thing for a while and I found your profile and you really got me thinking that if someone else can make a company i can to, you don't mind if I make a company do you?
Sure thing
Is this something you guys want me to improve apon?
@WSindustries
@asteroidbook345
Looks amazing. You could probably make this car into a rally car.
@WolfRuin Thanks
Well this is my first plane to reach 1000 downloads. Thanks everyone
+1@cnorth12 Thanks, thought I would try something different.
@TrislandianAlliance Ok, thanks for the suggestion
@Mustang51 Thanks
@Mustang51 I made a new version of this. I took your advice and raised the headroom of the cockpit and I made it slightly easier to take off and land. So now instead of easing on the throttle to take off, you can gun it and just pitch up and your flying. Again thanks for commenting.
Made a new version that has some minor fixes
@WSindustries Maybe, im not the best at making body's but i might try in the future
@cnorth12 I made an offroad chassis you can test if you want
+1@Mustang51 Sure thing
+1@Mustang51 Thanks for the info, it means a lot
@cnorth12 your welcome. Anything specific you want to see?
@cnorth12 sure
Ok, I see
The shocks are a bit weak and need more damper, other than that, wonderful build.
Dosent work on high physics
I noticed one thing with this, (its not your fault), the rear suspension is bottomed out. adding an extra shock in the back might help. Or if you have mods in creasing the spring strength a lot would help it a lot. I have to say, im surprised you built this so fast. It looks very clean and sleek and it still handles very well. It does go it little slower but that unavoidable because of the weight of the body. If you need any other chassis, just comment.
@DEN12345 sure
Nice, well, good luck!
@DEN12345 Just posted it
@DEN12345 Actually if you wait I have a V2 you could use
Decent truck, front suspension is great, and the body is very clean, although the rear suspension could use some work. When the car is sitting, the suspension is already bottomed out which a big problem for absorbing any sort of bump. Secondly, the back of the truck should have 4 link which this truck does not.
Also just be aware that this is a work in progress so there may be a few missing features or some small engineering hiccups. If you notice anything or would like to recommend an idea, please comment. Thanks.
I fixed it, the back right wheel (if looking from front) was hooked to the wrong engine causing the left side to lose power and therefore pull the car to the right. https://www.simpleplanes.com/a/YUfwqf/Aircraft10
I noticed your rear 4 link suspension is not functional, this could be fixed with some geometry positioning and more rotaters. The front suspension works pretty well though.
+1@Christustoft You claim to use no computer mods yet you have two different sized shocks in the front which is impossible without mods.
Do you mean downforce?
Explain pls
@goodzza It flew as in airborne.
+1Is it supposed to?
It legit flew away
Also you removed the steering wheel and moved the cockpit, it no longer has the first person view it used to have.
+1It still tips over
+1Sorry I haven't made anything for a while, I have been playing other games and got a new phone. I will hopefully make more things sooner.
+2Nevermind, thank God for your amazing how to build cool cars series, learned yet another great tip. Sorry for the inconveinience
Ok I need help, started a chassis build and it already weighs 3,569 ibs. Is that good? I don't think it is but I'm not sure
So true.
What people are doing is taking the the cockpit off, saving the the whole car as a sub assembly, creating a new plane and pasting the car sub assembly in the plane spot and putting the cockpit back on.
@TakicraftCorporation I think I learned the most on the engine page. It helped understand that u don't need to load it with detail. Just what works and looks good.
@TakicraftCorporation Thanks! Also I've read up on all your how to build a good car things and learned a lot.
@TakicraftCorporation I wanted to make a company thing for a while and I found your profile and you really got me thinking that if someone else can make a company i can to, you don't mind if I make a company do you?
@TakicraftCorporation Ok
In your biography thing I think it say's something about you making parts for cars, is that so? Also we have almost the same favorite car!
@Nerfaddict Ok
@Delt4 Thanks.
Your cars are freaking amazing! Tell when that 240sx is done.
@PositivePlanes I also have a version with a trophy truck body if your interested.