@RedstoneAeroAviation you need 12 rotators each rotated with 30 degree difference to one another
you need 12 thin fuselage pieces at the same degree as each rotator +5 degrees
you then need a HUGE beacon light which has Throttle as input
and this is the important one the dry thrust is given by a small BFE150 inside the engine with 0.1 scale and 20 exhaust scale and the exhaust should be pretty transparent(sth like 2F-3A) so the color can be mixed with the beacon lights
notice that there are 2 BFE300
The big one is just for exterior has no power nor an exhaust (max=0.25 because it still drains fuel multiplier=0 exhaust scale 0)
and the other one is for wet thrust(afterburner) and afterburner exhaust effect
scale = 0.25,0.25,0.125
exhaust scale = 6,6,12
and the transparency should be about the same as the dry thrust exhaust
about the beacon lights
if you are gonna use fiery orange like me
you should use like a winter hazel palette
it just makes the best effect for immitating heat
@MethaManAircraft okay i'll tell you the truth
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
i was lazy :P
@Tully2001 i think if i'm correct human horizontal field of view is around 110-120
and horizontally
and since monitors aren't shaped like our eyes, aka are flat
we see shapes elongated :P
now imagine that your eyeball was flat XD
@BroAeronautics will arrive shortly
maybe a 400-550 part version with less rotators
but with the same details
runs pretty smooth on my potato at this part count
@minsu9437 if you have overload
take 2 fuel blocks
set one's fuel and fuel capacity to #########
and set the other ones fuel and capacity to negative ######### ( - same number)
and put them exactly inside one another if one is nudged slightly out of the same place the plane will break
because it will have negative weight
@BogdanX thanks
i've made the cockpit highter
but i've gotta say
i know for sure that this plane is to scale (W-46ft , L-62ft , H-16ft)
if that blueprint is to scale too why doesnt it fit at least at some places?
looks like a 16:9 wallpaper stretched on a 4:3 screen.
i've been working with this blueprint
@Tully2001 pls dont go off-topic
talk about relevant stuff :P
like for example the plane is ultra detailed but it has stock rear landing gear
or how all the missiles are custom but the "sidewinder"s are just stock guardians :P
your username CAN be changed
but devs removed the "change username" feature long ago
because people were abusing that system
but i think there still can be exceptions
@Awsomur what about your newest forum post?
couldn't you just edit this one
it's fairly fresh no need for a new forum post.
dont get me wrong im just trying to understand what's the excessive forum post spewing all about.
@BaconEggs Yeah i know i 've flied it one more thing that i think should be fixed is the roll sensitivity. Compared to pitch senstivity
the difference is huge.
@RedstoneAeroAviation you need 12 rotators each rotated with 30 degree difference to one another
you need 12 thin fuselage pieces at the same degree as each rotator +5 degrees
you then need a HUGE beacon light which has Throttle as input
and this is the important one the dry thrust is given by a small BFE150 inside the engine with 0.1 scale and 20 exhaust scale and the exhaust should be pretty transparent(sth like 2F-3A) so the color can be mixed with the beacon lights
notice that there are 2 BFE300
The big one is just for exterior has no power nor an exhaust (max=0.25 because it still drains fuel multiplier=0 exhaust scale 0)
and the other one is for wet thrust(afterburner) and afterburner exhaust effect
scale = 0.25,0.25,0.125
exhaust scale = 6,6,12
and the transparency should be about the same as the dry thrust exhaust
about the beacon lights
if you are gonna use fiery orange like me
you should use like a winter hazel palette
it just makes the best effect for immitating heat
@Sparrow007 this fictional plane has more details than most of the replicas on this website
you deserve more
@GINGER01 i'm basically general dynamics
@RAF1 do you want me to work on it until 6am????
you could have waited to comment at least for 8-9 hours
XD
@RailfanEthan why would he?
i enjoyed his story more, than i enjoyed yours
@MethaManAircraft okay i'll tell you the truth
...........
...........
...........
...........
...........
...........
...........
...........
...........
...........
i was lazy :P
@MethaManAircraft the flaps slow you down to the landing speed
so i thought there is no need for the airbrakes
@Tessemi i know XD
the gun itself gives a lot of detail
@BroAeronautics nope
Looks really cool dude
i'm just amazed how you made the canopy
you mind if i use it on one of my builds?
@Tully2001 you would see the world like this :P
@Tully2001 i think if i'm correct human horizontal field of view is around 110-120
and horizontally
and since monitors aren't shaped like our eyes, aka are flat
we see shapes elongated :P
now imagine that your eyeball was flat XD
@Mithrandir you tell me
what's wrong with it?
@BroAeronautics will arrive shortly
maybe a 400-550 part version with less rotators
but with the same details
runs pretty smooth on my potato at this part count
@WEAPONSMITH thanks
I've uploaded some pics on my newest forum post with changed FOV in sandbox mode
@Blue0Bull i'm currently at the highest possible state of depression
i contemplate deleting my account
@BogdanX yeah it's gonna be when i release the f-16 XD
@Blue0Bull pai monei
@Hyperloop you mean the camera FOV?
xd
@Hyperloop um engalndo my bed langug
what's focal length?
@BaconAircraft yes you set the mass to 0 when it's full
but what happens when you use fuel?
maybe negative mass?
XD
@minsu9437 if you have overload
take 2 fuel blocks
set one's fuel and fuel capacity to #########
and set the other ones fuel and capacity to negative ######### ( - same number)
and put them exactly inside one another if one is nudged slightly out of the same place the plane will break
because it will have negative weight
@BrokenBone i have an old one
doesnt look that good
But has working missile bays
@BrokenBone already a work in progress
@phanps xd
yeah
snowflakes refuse to melt
@BaconEggs i honestly don't know why you're upset
@Blue0Bull everything is done is done
that only means i have to make the rear gear and it's due to upload
@BogdanX thanks
i've made the cockpit highter
but i've gotta say
i know for sure that this plane is to scale (W-46ft , L-62ft , H-16ft)
if that blueprint is to scale too why doesnt it fit at least at some places?
looks like a 16:9 wallpaper stretched on a 4:3 screen.
i've been working with this blueprint
@Tully2001 pls dont go off-topic
talk about relevant stuff :P
like for example the plane is ultra detailed but it has stock rear landing gear
or how all the missiles are custom but the "sidewinder"s are just stock guardians :P
@Blue0Bull the art of clickbait :3
@BaconEdgy i always wanted to ask
where is your video gone where you hunt a man the age of your dad printed and taped on a cardboard piece?
@ChiChiWerx 750
@Jengstrom any replica is good to me if it has the shape and is well proportioned
your username CAN be changed
but devs removed the "change username" feature long ago
because people were abusing that system
but i think there still can be exceptions
@CALVIN232 sure
just tag me
also 2 edgy 4 me
<-------------- @PorkyClown3
@Dllama4 to be the best you have to beat the best,
that's why im constantly beating myself :P
@Stingray thanks :D
@Awsomur what about your newest forum post?
couldn't you just edit this one
it's fairly fresh no need for a new forum post.
dont get me wrong im just trying to understand what's the excessive forum post spewing all about.
@RailfanEthan i believe that it was made like that in case if the plane and/or the user has a really long name
man you make a lot of forum post
i find it hard to see the necessity in most of them
@AndrewGarrison i broke my favourity coffee mug :(
@BaconEggs Yeah i know i 've flied it one more thing that i think should be fixed is the roll sensitivity. Compared to pitch senstivity
the difference is huge.
what's up TS?
rip turns out i was the one who made the intakes
what a relief :P
nice intake, shame i wasn't the one who made it.... :(
@tsampoy send me a picture and i'll do it :P