@Probreyene Okay, feel free to use my car. What you said about downforce and ground clearance, I think my car is competent enough and I think f1 is meant to be close to ground clearance. If you need to use them, I recommend the ms16h and ms21, both of which are very good in performance and operation。
@Tingly06822 @GrFrog After your suggestions and my subsequent updates, the current car is even more amazing than the photos above. I assure you, when it launches at the end of the month, it will be the most elegant, legendary, and restorative f1 in the entire simpleplane site
@YEEZYETESH In addition, your rear half of the body is handled very well, please focus on the front of the next production. Have you followed my Ms23? You can refer to the front of that car, reduce the sweep Angle of the front wing a little, shorten the front a little, and I will subscribe to your progress in the next update.
@Rocketguy2079 I would like to know your thoughts on the 2009 f1 camo, which is not painted yet. There is also a special coating for ms23, I have no idea now
@Rocketguy2079 Well.
Coincidentally I have finished a new car
2009， 600plus parts ，New body, new steering wheel and front wings damage system, It has a huge change compared than the MCT10.
Please look forward to it
In case you don't understand, I have modified a little detail for you, please have a look
https://www.simpleplanes.com/a/Pci2yO/2023-AUDI-Rocket-industries-racing-RIR23
Nice car,
Please increase the width of the front wing to the width of the front wheels and then narrow the space between the rear wheels. It must
looks better if you can do this.
帅
@IQinventory Lance is a good driver, you son of bitch.
”www.simpleplane.com”
+1你就不能拿个新点的车改😓
+1...
This's how simpleplanes communities fall
+5@Rocketguy2079 yes
@Rocketguy2079 Do you like it？
蓝色妖姬
nice
@Rocketguy2079 ok,I will
佩诺 跑者
+2👍🏻
@LowtusF139 Come on, the number of amr22 parts in qzzzz last year exceeded 2000, and my amr23 parts numder were already small
@volatilescaly Yeah, have a good day mate.
You seriously?
+1@Probreyene @ToeTips @Tingly06822 @Rocketguy2079 @GrFrog @32
+1Have fun
@Probreyene Okay, feel free to use my car. What you said about downforce and ground clearance, I think my car is competent enough and I think f1 is meant to be close to ground clearance. If you need to use them, I recommend the ms16h and ms21, both of which are very good in performance and operation。
+1Please keep working on f1@Drummer1112
Please keep going
@Tingly06822 @Rocketguy2079 @GrFrog @32
@Tingly06822 @GrFrog After your suggestions and my subsequent updates, the current car is even more amazing than the photos above. I assure you, when it launches at the end of the month, it will be the most elegant, legendary, and restorative f1 in the entire simpleplane site
+2@GrFrog Thank you for your suggestions. I hope you like it when it is published
+2@Tingly06822 Sure, and thank for your opinion
+1@Tingly06822 Thank you very much, very great idea
@Tingly06822 @GrFrog @Rocketguy2079 @F1Fan8910 Can you give me some advice
@Rocketguy2079 how to tag
@Rocketguy2079 Why
Your cars were so pretty
+1@YEEZYETESH In addition, your rear half of the body is handled very well, please focus on the front of the next production. Have you followed my Ms23? You can refer to the front of that car, reduce the sweep Angle of the front wing a little, shorten the front a little, and I will subscribe to your progress in the next update.
+2@ChopinLin a little damage system
Pay attention to the proportions of the whole vehicle, shorten the front end and narrow the tires a little
@Cir8Maybe it was a suspension link problem, I tried to fix it in the second edition of sf23
+2。。。。
@PeterLin666666888888 Have not any power to make
Very nice car, mate.
This is allowed to be reproduced
Jules was my another account ， I would upload some update car on it
This is allowed to be reproduced
你的w13车头小了，我修改了一下，你看看。
希望你能出比利时站版本
https://www.simpleplanes.com/a/INXf23/w13
@Rocketguy2079 I would like to know your thoughts on the 2009 f1 camo, which is not painted yet. There is also a special coating for ms23, I have no idea now
@Rocketguy2079
If you don't understand, just take my 7E18B and study it. It's yours
Hopefully our cars will be in the same photo in 2024
@Rocketguy2079 My hubcap turns because it's attached to Pirelli
巨巨巨巨巨巨巨巨
@Rocketguy2079 Well.
Coincidentally I have finished a new car
2009， 600plus parts ，New body, new steering wheel and front wings damage system, It has a huge change compared than the MCT10.
Please look forward to it
空力套件还原的相当厉害，细节做的太好了👍🏻
如果有涂装就更好了
@Rocketguy2079 I guarantee my model could run on iPhone 6S
@Mustang51 ok
In case you don't understand, I have modified a little detail for you, please have a look
https://www.simpleplanes.com/a/Pci2yO/2023-AUDI-Rocket-industries-racing-RIR23
Nice car,
Please increase the width of the front wing to the width of the front wheels and then narrow the space between the rear wheels. It must
looks better if you can do this.