@Boeing727200F Yes, coincidentally, I am doing this now. But this is really a very heavy project, many parts of it need to be modified or even rebuilt. So it won't come soon.
@Hira629 Thanks bro, glad you like it.
I fixed some of the look details and the link was put in the introduction.
Welcome to download the latest version.
G11N Hakusan (白山) is a land-based torpedo bomber that was developed by the Nakajima Aircraft Company for the IJN at the end of 1944. It used for torpedo attack, antisubmarine, high-altitude bombing, reconnaissance, and front support missions. Benefit from three 5000 HP Ha 54 engines which developed for G10N Fugaku, It can break through enemy fighter's interception with high speed.
Hakusan Kai (白山改) is the premier version of Hakusan. The cockpit structure has been optimized so that more fuel can be loaded inside the fuselage. In addition, bomb bay and nose remote-control turret are added. Since the vent opening is toward the end, the exhaust gas can provide a little thrust.
------Weapon Configuration------
2× 30 mm Type 5 cannon
2× 13 mm Type 3 machine gun
1× 20 mm Type 99 Mark 2 cannon in each remote-control turret
------Control------
AG1: Drop auxiliary fuel tanks, activate torpedos;
AG2 and Trim: Trim;
AG3 and AG4, VTOL and Trim: remote-control turrets;
AG5 and VTOL: Flaps;
AG5 and Trim: Air brakes;
AG6: Open bomb bay;
AG6 and Trim: Adjust bombing sight;
AG7: Navigation lights
AG8: 30 mm Type 5 cannons.
@AndrewGarrison Please add cutting function of the fuselage block and hollow fuselage.
If the cutting function is added, it will be more convenient to build a cockpit structure. Now there is only glass fuselage, but it is still cannot make a hole or slot from the side of the fuselage, so it still difficult to build a good-looking cockpit on a fuselage part.
@AndrewGarrison @WNP78
I think we need glass fuselage cone too, to build smooth structure like the nose of bomber.
Otherwise it's hard to make a nice glass bomber nose or glass turret.
@SeanTurbineModifier Thanks!
I didn't learn to modify XML at that time, so I used a lot of parts to build it.
If I make a similar work now, there will be a lot less of the parts I use.
@ImLvLiCHN 哈哈，目前正在制作一款决定版的白山，比这个更好，敬请期待
@Boeing727200F Yes, coincidentally, I am doing this now. But this is really a very heavy project, many parts of it need to be modified or even rebuilt. So it won't come soon.
+1@FCONHTY 顺便一说这架飞机我有个更新的版本在制作中，外观和功能性方面会更加出色，但是零件数。。。又变多了
@FCONHTY 多谢支持！很抱歉回复得这么晚，因为现在不常玩了所以官网也不经常上了。关于零件数，说实话在外观和零件数方面的确很难取舍，因为我想把外观做得更好，零件数也就越来越爆炸，如果限制零件数外观上肯定就会打折扣了。
@WalrusAircraft Thanks again :)
@Hira629 :D
+1@Hira629 Thanks bro, glad you like it.
+1I fixed some of the look details and the link was put in the introduction.
Welcome to download the latest version.
Supplementary note: please use three groups of cannons separately, if activate them at the same time, the firing frequency will be reduced.
@NAD Thank you
@WalrusAircraft Thanks, I'm glad you still remember me. :D
G11N Hakusan (白山) is a land-based torpedo bomber that was developed by the Nakajima Aircraft Company for the IJN at the end of 1944. It used for torpedo attack, antisubmarine, high-altitude bombing, reconnaissance, and front support missions. Benefit from three 5000 HP Ha 54 engines which developed for G10N Fugaku, It can break through enemy fighter's interception with high speed.
Hakusan Kai (白山改) is the premier version of Hakusan. The cockpit structure has been optimized so that more fuel can be loaded inside the fuselage. In addition, bomb bay and nose remote-control turret are added. Since the vent opening is toward the end, the exhaust gas can provide a little thrust.
------Weapon Configuration------
2× 30 mm Type 5 cannon
2× 13 mm Type 3 machine gun
1× 20 mm Type 99 Mark 2 cannon in each remote-control turret
------Control------
AG1: Drop auxiliary fuel tanks, activate torpedos;
AG2 and Trim: Trim;
AG3 and AG4, VTOL and Trim: remote-control turrets;
AG5 and VTOL: Flaps;
AG5 and Trim: Air brakes;
AG6: Open bomb bay;
AG6 and Trim: Adjust bombing sight;
AG7: Navigation lights
AG8: 30 mm Type 5 cannons.
@AndrewGarrison Please add cutting function of the fuselage block and hollow fuselage.
+4If the cutting function is added, it will be more convenient to build a cockpit structure. Now there is only glass fuselage, but it is still cannot make a hole or slot from the side of the fuselage, so it still difficult to build a good-looking cockpit on a fuselage part.
@AndrewGarrison @WNP78
+13I think we need glass fuselage cone too, to build smooth structure like the nose of bomber.
Otherwise it's hard to make a nice glass bomber nose or glass turret.
I think we need glass fuselage cone too, to build smooth structure like the nose of bomber.
+6Really amazing!
+1@SledDriver Np
Really cool and powerful! Nice build!
@Mr6371 +1s
@Weirdo919 Thank you!
@Rodrigo110 Thank you!
@Rodrigo110 Thanks!
@BogdanX ( ^ω^ )
@Mumpsy Np :D
Awesome! Cool and powerful!
@RailfanEthan Np :D
@realluochen9999 Np :D
@SeanTurbineModifier Thanks!
I didn't learn to modify XML at that time, so I used a lot of parts to build it.
If I make a similar work now, there will be a lot less of the parts I use.
@Tessemi Thank you!
@JettStorm Thanks!
@SeanTurbineModifier Yeah, I wish that too. :D
Thanks for your support!
@TheGuyYouMightKnow Thank you!
@jamesPLANESii Thanks!
@Mr_6371 Thanks!
@QingyuZhou 谢谢！
@Pianoman Thanks!
@Pianoman Thank you!
@BaconRoll Thank you!
@Sauce Thanks for your comment. ( ^ω^ )
I refered to several types of actual fighters to improve its details.
@DestinyAviation @hopotumon
Thanks!
@ACGfans0079 @ValtsuAircraftIndustries @TinyToucan
Thanks!
@WIZARD2017 @zap210 @AudioDud3
Thanks!
@lhb3398258 @Rodrigo110 @rubbishcraft
Thanks!
@Mainblocks Sure, wish you success! :D
Thanks for your support!
@AudioDud3 Np :D
@AudioDud3 No problem
@EpicPigster1 No problem :D
@EpicPigster1 Thanks for your support! I'm honored to know that my work can inspire others. ( ^ω^ )
+1@EpicPigster1 Np, I really love it!
@EpicPigster1 :D
@Ichko Thank you!