@Sarpanitu Thanks. I love these types of challenges! Apart for the fuel tanks and containers this has truck loads of mods and XML edits etc. Super good fun to build!
Same issue. If set upa rotor as manual ie. control prop without a governor, its not bad, but requires a lot of finicky handling with prop pitch and throttle so engines don’t overspeed... painful @PyrusEnderhunter
@PyrusEnderhunter I tried making a quad copter, but very difficult to get the propellers really controllable (up/down and left /right etc.) so I went for jet engines and RCNs instead.
For the main rotors you will need more power to the main engine. Or you could try increasing the weight - check the white bands on each blade - try doubling the weight.
For the rear rotor, just need to increase max rpm from 350 to something higher.
There are two joint rotators on the main prop... change from 10 degrees to say 15 or 20 this is for lift. And then one could copy one of the gyro’s and have 3 of them which will increase pitch/roll/yaw.
Making these changes may provide what seems to be more respinsive control, however I think it will be to ‘touchy’ when you are are flying close to the ground or landing on carriers etc.
@prankstergangster360 Thanks
@zap210 I saw it and I did!
So good!
@503rdAirborneSoldier Planes are coming, just deciding what to do next...
@TheLatentImage Thank you
Very cool - do they move? @Ichko
Yep, and thanks @Gravity
Apple mac
@Gravity
@Darkpluto Thanks
@Sarpanitu Thanks. I love these types of challenges! Apart for the fuel tanks and containers this has truck loads of mods and XML edits etc. Super good fun to build!
Thanks
@iLikeipads
Looks like you put some effort into this... looks great and not bad driving it around!
Well done... looks and works fine!
Neat
Same issue. If set upa rotor as manual ie. control prop without a governor, its not bad, but requires a lot of finicky handling with prop pitch and throttle so engines don’t overspeed... painful @PyrusEnderhunter
@PyrusEnderhunter I tried making a quad copter, but very difficult to get the propellers really controllable (up/down and left /right etc.) so I went for jet engines and RCNs instead.
@PyrusEnderhunter Something you can fly around the place?!? Like a quad copter but using a jet engine instead.
@PyrusEnderhunter What do you mean?
@EpicPigster1 Very well done again... looks, functions and flies great! Love folding wings.
@Awsomur Thank you, you're very kind.
@Sarpanitu Thanks, good review. I'm doing one more as well just because. And I didn't realise it could already be hooked up!!!!
@AtomicCashew I had it built already, so maybe thats not so fair... sorry.
Looks great and love the tracks!!!!
Very nice
Love how it flies! feels authentic
Very well done - love all of the details and features!!!
@DemonSniper8
Lower Part Count version:
https://www.simpleplanes.com/a/QWiVIm/RipSaw-V1-1-Lower-Part-Count
@destroyerP
Lower Part Count version:
https://www.simpleplanes.com/a/QWiVIm/RipSaw-V1-1-Lower-Part-Count
@Jacklepyansky
Lower Part Count version:
https://www.simpleplanes.com/a/QWiVIm/RipSaw-V1-1-Lower-Part-Count
Love the gun sight - very cool!
I was looking everywhere for the type of plane this was but could not pin it down 100% - Well done on both!
Very nice, and few firsts in your design/build I reckon...
So good! Now one of my favourites!
@IAmMyBoss Thanks
I don’t think so... @Fjorge
They can easy... do you have FineTuner MOD installed ?
@ACMECo1940
Worm,,, hmm...
@DarthAbhinav
'lounge a bit' - what does this mean????
@ACMECo1940
Siri - enough is enough you YOU U UUUUU are fired.
hehehe... so baadd (good)
Let me know how it flies
@shipster
Thanks again
@Awsomur
@Awsomur YAY some one like my drinking bird!!!!!!!
Will do... I totally hear you!
@furryfan101
My first post!
@dootdootbananabus
Just in front of main rotor - nudged downwards... @Aaron2107
Thanks :)
@corsair013
Easy to do... I had them plus rocket pods on an earlier version. Surley you can install them? @furryfan101
For the main rotors you will need more power to the main engine. Or you could try increasing the weight - check the white bands on each blade - try doubling the weight.
For the rear rotor, just need to increase max rpm from 350 to something higher.
@Aaron2107
There are two joint rotators on the main prop... change from 10 degrees to say 15 or 20 this is for lift. And then one could copy one of the gyro’s and have 3 of them which will increase pitch/roll/yaw.
Making these changes may provide what seems to be more respinsive control, however I think it will be to ‘touchy’ when you are are flying close to the ground or landing on carriers etc.
@Aaron2107
I think you are probably right
@DarthAbhinav