@GalacticaAsia Hey, man,Can you make ARJ21?Because I am from China,ARJ21 is another jet regional narrow-body passenger plane built by our country besides C919. But it is the first aircraft put into commercial operation in our country.
@Lovelydr34m
If so, I can understand, because Trent 800 is really hard to find. Even the Boeing 777-200 equipped with RR (including ER model) I made uses Trent XWB on Airbus A350, not the real Trent 800 engine.
Tips:I tried to install Trent 500 from A340-600 on 777 to simulate Trent 800, but from the appearance, I thought the degree of reduction was not enough, so I replaced it with a new engine, Trent 900 from A380 and Trent from A350.
Well, let me say something about this painting that I think is wrong.
As far as I know, the engines of MH's 777-200ER series are all equipped with rolls royce's Trent 892, not Pratt & Whitney's PW4090. Before you built this painting, this plane was from JIN Airlines in South Korea, and the engines they used in the 777-200ER series were Pratt & Whitney's PW4090, so I want to point out the mistakes in the engine.
@AeroflotBilibili If you can't find A330-200, you can try to find out if there is anyone named FeiGe3 or Brololxd among the four people who voted for you.You can try to follow them. They are good at making variant models about Airbus and Boeing.
There is something wrong with this,The original aircraft is Airbus A330-300 with PW engine, and the actual prototype is Airbus A330-200 with RR engine.
Hey, buddy, I'm glad to see that you have a work on the regional turboprop plane. So I hope you can make some small jet regional aircraft later, such as Bombardier's CRJ and Embraer's EMB and ERJ series. Of course, I also hope that you can make some planes with similar positioning to ATR-72, such as Bombardier's Dash8 series, Saab's 340 and 2000.😃😃
Er ... I downloaded it and looked at it. The landing gear is fine. The only problem is that speed brake has a little problem. In addition, this paintingIt's still good
@GalacticaAsiaWhat's your next plane making plan, rework some planes or launch new ones? If it's a new plane, can you try to make some regional jets?
+5Well,it's looks great
+2Do you have any plans for painting Malaysia Airlines?
+1This thing is so cool.😊😊
+1By the way, can you make some livery for the first generation Boeing 777 series I made?
To tell the truth, buddy, the style of this tupolev Tu-154 you made is the same as that of the plane made by GalacticaAsia @GalacticaAsia.
+1@GalacticaAsia Hey, man,Can you make ARJ21?Because I am from China,ARJ21 is another jet regional narrow-body passenger plane built by our country besides C919. But it is the first aircraft put into commercial operation in our country.
+1I'm sorry, I used your plane without your authorization to make some changes and I didn't tell you about it. I'm deeply sorry for that
+1@Lovelydr34m Ok, you can try to make Malaysia Airlines painting for Airbus A380 or Malaysia Airlines painting for Airbus A350.
Nice one.I like it
@Lovelydr34m No, I put the flap on and brought a stick, but it won't fly.
There is a problem. I can't get this plane to take off normally when it is on the ground.
You can try to make the SkyTeam painting of this plane？
I want to make a suggestion that the deformation of the wing in the air is not realistic.
@Lovelydr34m
If so, I can understand, because Trent 800 is really hard to find. Even the Boeing 777-200 equipped with RR (including ER model) I made uses Trent XWB on Airbus A350, not the real Trent 800 engine.
Tips:I tried to install Trent 500 from A340-600 on 777 to simulate Trent 800, but from the appearance, I thought the degree of reduction was not enough, so I replaced it with a new engine, Trent 900 from A380 and Trent from A350.
Well, let me say something about this painting that I think is wrong.
As far as I know, the engines of MH's 777-200ER series are all equipped with rolls royce's Trent 892, not Pratt & Whitney's PW4090. Before you built this painting, this plane was from JIN Airlines in South Korea, and the engines they used in the 777-200ER series were Pratt & Whitney's PW4090, so I want to point out the mistakes in the engine.
Do better than me😊
@fujiwalu Really need it
有实力的
The reason why I didn't make the 777-300 with GE engine is that in reality, no airline has installed the GE90-94B on the 777-300.
这个航班发生什么事了？
Leak: the inner flap cannot be extended.
Bug fix: Fixed the retraction problem of the left landing gear.
Some new things: winglets have been added and the engine hanger has been redesigned.
There is something wrong with your A350-900 main landing gear.
@AeroflotBilibili Another point is that Sichuan Airlines A330-200 and A330-300 are both equipped with Rolls-Royce Trent700 engines.
@AeroflotBilibili If you can't find A330-200, you can try to find out if there is anyone named FeiGe3 or Brololxd among the four people who voted for you.You can try to follow them. They are good at making variant models about Airbus and Boeing.
@AeroflotBilibili In fact, your mistake this time is a flaw, because I saw the plane painting you made, which is very realistic.
There's still a problem with this
There is something wrong with this,The original aircraft is Airbus A330-300 with PW engine, and the actual prototype is Airbus A330-200 with RR engine.
Hey, buddy, I'm glad to see that you have a work on the regional turboprop plane. So I hope you can make some small jet regional aircraft later, such as Bombardier's CRJ and Embraer's EMB and ERJ series. Of course, I also hope that you can make some planes with similar positioning to ATR-72, such as Bombardier's Dash8 series, Saab's 340 and 2000.😃😃
Let me guess which plane is next.😁
哇，涂装做的真的可以（希望大佬能看看我做的787-8😘）
Good, I have something to live with again.
@GalacticaAsia So... can you tell me which plane you have planned to launch first
Bro, C919Can you do it? Now C919 has started commercial operation. If you can, please tell me when it will go online.
Er ... I downloaded it and looked at it. The landing gear is fine. The only problem is that speed brake has a little problem. In addition, this paintingIt's still good
@GalacticaAsia'sHow did I do?o>_<o
Well, I'll replace the GE90 Change it to GEnxOr four CFM56.
@Inuyasha8215 ok,i know it
Well,It kinds pretty good.But my smart phone can't hold it