@Hectord27 As far as I know there is nothing, I think the key is to design them part by part. Each section should not be joined anywhere with the previous one, except in a hinge that you have adjusted in degrees depending on the speed of the aircraft. If you want I can tag you in release of the glider.
@asteroidbook345 The last photo tries to simulate the visible trail of water from the ballast system. The sailplane has almost 13 gallons of water ballast. The system does not produce any thrust.
@jamesPLANESii Thanks James, the cockpit isn't ready yet. Until now has a speedometer and a fixed altimeter, still needs a simple variometer, a turn coordinator and i am thinking to make a pilot. It's in raw form, but would you like to try it ?
@jamesPLANESii Thanks James, the cockpit isn't ready yet. Until now has a speedometer and a fixed altimeter but still need a simple variometer, a turn coordinator and i am thinking to make a pilot. Would you like to try it ?
Some small details before the final upload. The final design will come with a tow aircraft that allows launch of the glider and can land after independently. Also includes a ballast hydraulic system (last shot).
Finally i can see a plane and say it has endless hours of research behind it. Very original and extremely well made, perfect airfoils. Even the handles move. Very good work ! By pure curiosity, does this aircraft really exist in New Zealand ?
All the aircraft were great, as there are never any bad designs. Good luck to all.
As for the delay, personally there was never a problem, but it's polite to be on time . You also did very well in putting your study first and then having fun. Again congratulations to all , happy flights
Nice landing and very interesting instrumentation. Is the altimeter gause working? Also if I make a suggestion, you can add some colours to the needles to live them up.
Congrats very detailed job
Very nice plane with wonderful visibility from the open cockpit and useful historic details. Perhaps its little faster than the original. Keep up the good work
Congratulations for your effort to share some of Greece struggle for freedom . However Junta was not only a political event , but more a more complex geopolitical fact. We can never forget what hapend to Cyprus in 1974 . Let's hope that in the future we will be more prepared to defend from inforced democrats . A true dark page in Greece's history.
Sounds very nice idea, but since not everyone is connected at the same time, It would be great if the programm was videotaped and not live. YouTube sounds better.
Congratulations. I am sure your father had very good storys to tell . You must be proud. Let's hope that humanity will learn at some point from the horrors of war and we will focus on scientific progress .
@FlipposMC Ευχαριστώ πολύ , ξέρεις το τελευταίο σκάφος σου ήταν υπέροχο. Στην πραγματικότητα βρήκες κάτι αρκετά δύσκολο . Κινητήρες ανάσχεσης. Υπάρχουν κάτι σουηδικά τζετ που τα χρησιμοποιούν για να αναστρέψουν. Σκέψου μήπως κάνεις κάνα viggen, θα σκίσει.
172 and 182 has no majors exterior differences between the early and the following models. My personal favourite is the 152. Is a two seater with better horizon visibility at every angle and short check list. If you want something near classic but modern at the same time, there is the beautiful but non so popular 162 model . Between the above defenetly the classic 172.
@EternalDarkness Will do , hope to make the wings curve realistic. Also this model has full span flaperons that do not move in the same negative and positive degrees. :-(
@EternalDarkness Thanks friend, your wings are always very realistic. To be honest I still don't know how to make them so beautiful. However, some minor details here do not appear, such as the wings trailing end curved slightly at each other, they don't have same thickness everywhere. I'm trying it for the first time, let's hope it will come out right.
It's a good job, I liked the different design. i think you should write in the description that it is a uav, otherwise it is probably impossible for a human to handle it. It would also be much better if you had a rudder. Keep up the good work
Υπέροχο αεροσκαφος. Τώρα με τον covid δεν μπορώ να πετάξω από το τατόι το μικρό μου 152, έτσι η παρουσιασή σου είναι οτι καλύτερο.
@Bman01 hi dear friend. Hi have the sailplane ready. Real life unfortunately has me working with something else. I will send it at some point
Nice to see proper Greek alphabet. Great work
Very beautiful
Nice ! So no more airplanes ?
Nice job there. I am not so active lately, but it's nice to see Greek colours in a futuristic design. Keep up the good work
Τ
Looks very good, keep it up !
nice concept
@Hectord27 As far as I know there is nothing, I think the key is to design them part by part. Each section should not be joined anywhere with the previous one, except in a hinge that you have adjusted in degrees depending on the speed of the aircraft. If you want I can tag you in release of the glider.
@asteroidbook345 The last photo tries to simulate the visible trail of water from the ballast system. The sailplane has almost 13 gallons of water ballast. The system does not produce any thrust.
@jamesPLANESii Thanks James, the cockpit isn't ready yet. Until now has a speedometer and a fixed altimeter, still needs a simple variometer, a turn coordinator and i am thinking to make a pilot. It's in raw form, but would you like to try it ?
@jamesPLANESii Thanks James, the cockpit isn't ready yet. Until now has a speedometer and a fixed altimeter but still need a simple variometer, a turn coordinator and i am thinking to make a pilot. Would you like to try it ?
@EternalDarkness . Some new airfoils with elastic properties ..
Some small details before the final upload. The final design will come with a tow aircraft that allows launch of the glider and can land after independently. Also includes a ballast hydraulic system (last shot).
Nice civilian thematology.
very original !
Finally i can see a plane and say it has endless hours of research behind it. Very original and extremely well made, perfect airfoils. Even the handles move. Very good work ! By pure curiosity, does this aircraft really exist in New Zealand ?
@Noname918181 it's ok don't worry, I didn't participate mainly for the points. It's nice to see some feedback for your builds from time to time. ✌😊
Yes almost all the instruments in planes have white needles. Loved your compass, very smooth work . When are you going to launch ?
All the aircraft were great, as there are never any bad designs. Good luck to all.
As for the delay, personally there was never a problem, but it's polite to be on time . You also did very well in putting your study first and then having fun. Again congratulations to all , happy flights
Nice landing and very interesting instrumentation. Is the altimeter gause working? Also if I make a suggestion, you can add some colours to the needles to live them up.
Congrats very detailed job
I believe you stil have to judge a challenge... 😒
Οriginal design with extremely good paneling. Great thinking about landing system and flawless application to bomb doors. Congrats
Very nice plane with wonderful visibility from the open cockpit and useful historic details. Perhaps its little faster than the original. Keep up the good work
T
Congratulations for your effort to share some of Greece struggle for freedom . However Junta was not only a political event , but more a more complex geopolitical fact. We can never forget what hapend to Cyprus in 1974 . Let's hope that in the future we will be more prepared to defend from inforced democrats . A true dark page in Greece's history.
Sounds very nice idea, but since not everyone is connected at the same time, It would be great if the programm was videotaped and not live. YouTube sounds better.
@Mtech nice, we are almost neighbors.
Congratulations. I am sure your father had very good storys to tell . You must be proud. Let's hope that humanity will learn at some point from the horrors of war and we will focus on scientific progress .
@Mtech thanks , love your banner. Where are you from ?
Please don't copy staff without asking for permission. I am sure I can help you if you have questions or a topic to discuss.
@FlipposMC Ευχαριστώ πολύ , ξέρεις το τελευταίο σκάφος σου ήταν υπέροχο. Στην πραγματικότητα βρήκες κάτι αρκετά δύσκολο . Κινητήρες ανάσχεσης. Υπάρχουν κάτι σουηδικά τζετ που τα χρησιμοποιούν για να αναστρέψουν. Σκέψου μήπως κάνεις κάνα viggen, θα σκίσει.
172 and 182 has no majors exterior differences between the early and the following models. My personal favourite is the 152. Is a two seater with better horizon visibility at every angle and short check list. If you want something near classic but modern at the same time, there is the beautiful but non so popular 162 model . Between the above defenetly the classic 172.
@jamesPLANESii flap positions...nice ! Thanks
@jamesPLANESii yes 800 series, do you have any bibliography ?
@EternalDarkness good advice
@EternalDarkness that is nice, but the flaperons in negative deflection have -4 degrees and in positive +8. Can a rotator have decimal form in max ?
@EternalDarkness Will do , hope to make the wings curve realistic. Also this model has full span flaperons that do not move in the same negative and positive degrees. :-(
@EternalDarkness Thanks friend, your wings are always very realistic. To be honest I still don't know how to make them so beautiful. However, some minor details here do not appear, such as the wings trailing end curved slightly at each other, they don't have same thickness everywhere. I'm trying it for the first time, let's hope it will come out right.
Good cockpit visibility , nice handling , original design. The 3 factors of successes. Very nice :-)
Stay tuned, as the big challenge is realistic elasticity of the main wings and negative flaps !
"T" to be tagged
@bogdanx @jamesPLANESii @EternalDarkness
As it is your own design all answers are acceptable. However, even without a rudder, it passed all the waves of sam avoidance in the game. So its cool
It's a good job, I liked the different design. i think you should write in the description that it is a uav, otherwise it is probably impossible for a human to handle it. It would also be much better if you had a rudder. Keep up the good work
So underrated , very good work !
Seems no one won. Lol
Finally I can spotlight some of your work . Very beautiful boat, congrats.
@WaffleCakes thanks for the vote and the spotlight
@Zanedavid i am glad you like it