@Corn8 Ah! That's a good point! The reason I change the FOV is because I often create vehicles optimized for VR. So, I changed FOV to 90. I should suppose to make it for 60 FOV, but I forgot... 😅🤣
@Magnavox20MS233S There is a solution if you are using a mirror to fabricate.
In the text label track, there's txt that says,
Example)
<voffset={repeat(sum(-rpm1/80),0.33)}>
If you set the variables of the wheel correctly, change the txt that says -rpm1. The right side is rpm1 and the left side is rpm2.
☆) The direction of movement of the track depends on whether you attach '-' before 'rpm'. If It move the other direction around, attach it or remove it.
@CongTheWawa If you lower the block behind dummy to Connected Parts status by Y=-2000, As the missile attached to the block descends, it can be modified.
@Felldownstairsman It is helpful to follow the actual vehicle blueprint. This doesn't mean that you should 100% follow it, but you should use it as a reference.
@Felldownstairsman There are URLs that cannot be used even though You have image URLs. If the URL is not a URL that shows the original picture itself, it will fail.
@SpaceJunkee008
Do you know 'Overload' mod?
This is the default mod provided by simpleplanes.
You can find and activate it in the 'mods' of the menu screen.
If you activate it, there will be a '</>✈'' button on the designer screen. Use it to work.
@SpaceJunkee008 There are many kinds of causes, such as fuselage, fuel part, engine part, etc., but usually fuselage is the cause. Check it out mainly.
@Tsuchiisan The score is fine...! It made deliberately difficult to understand. And I think feedback on question 9 should be reflected. I just didn't think much about "type".
Then, I think I can leave the Android question as it is, but I will change it.
He is Alien. because,he is good at make plane. If it is true,there will be five UFOs in his house.
+1👍👍👍👍🙂
@F104Deathtrap Thanks!
+1@FastDan Thank you!
+1@BaconX69 This!
This is not real video! it made by Simpleplanes!
This is not real video! it made by Simpleplanes!
Released!
@DatTrainGuy19
@ConvoyPerson
@52
@Corn8 Ah! That's a good point! The reason I change the FOV is because I often create vehicles optimized for VR. So, I changed FOV to 90. I should suppose to make it for 60 FOV, but I forgot... 😅🤣
@JuanNotAnAlt Yup, I have discord.
@ReinMcDeer Yeah!
@Randomplayer Sure! It's free!
Maybe I'll come back with a lot of things.
@Magnavox20MS233S There is a solution if you are using a mirror to fabricate.
In the text label track, there's txt that says,
Example)
<voffset={repeat(sum(-rpm1/80),0.33)}>
If you set the variables of the wheel correctly, change the txt that says -rpm1. The right side is rpm1 and the left side is rpm2.
☆) The direction of movement of the track depends on whether you attach '-' before 'rpm'. If It move the other direction around, attach it or remove it.
@Aviator01 @Magnavox20MS233S
@CongTheWawa If you lower the block behind dummy to Connected Parts status by Y=-2000, As the missile attached to the block descends, it can be modified.
@Felldownstairsman It is helpful to follow the actual vehicle blueprint. This doesn't mean that you should 100% follow it, but you should use it as a reference.
@Felldownstairsman There are URLs that cannot be used even though You have image URLs. If the URL is not a URL that shows the original picture itself, it will fail.
@Ian_Yashima :-D thx!
@xNotDumb OMG there are many hackers in the early days of the game, so many innocent people baned by anti cheat...😶 I hope the your ban is released
@xNotDumb ah, Obviously, I was answering SpaceJunkee008's questions, but he deleted the his comment. So, it looks like talking with myself lol
@ThatRandomCouchPotato
Look at this for the code that decorates the label,
.
.
.
and look at this for the FT code that you can apply to the label
@ThatRandomCouchPotato If you use label parts, you can do it like this!
@SpaceJunkee008
Do you know 'Overload' mod?
This is the default mod provided by simpleplanes.
You can find and activate it in the 'mods' of the menu screen.
If you activate it, there will be a '</>✈'' button on the designer screen. Use it to work.
I am sending you a photo url for your reference and information about the following process.
@SpaceJunkee008 There are many kinds of causes, such as fuselage, fuel part, engine part, etc., but usually fuselage is the cause. Check it out mainly.
@SpaceJunkee008 You need to check that the car door is attached to the connection point of the other part.
@DESMONTHEWOLFIE You can listen to this music, if you are outside where you can hear beautiful sounds
@realSavageMan 😂
Short Introduction
This music name is 4'33 and it made by john cage.
This music score is characterized by the absence of any notes.John Cage aimed to hear the beautiful sounds of the surrounding environment in the stillness of this music.
@Type2volkswagen
@xNotDumb
@Kalashinikov @Mage2IsTriggered @Teako
@Bo1233 @FaLLin1 @DDVC
@PPLLAANNEE @OPaiTaOn @TJAirDesign
@BMilan @MintLynx @SimpleDynamincs
@V Ohh thx for your advice and kindness
@BMilan @MintLynx @SimpleDynamincs @PPLLAANNEE @OPaiTaOn @V @TJAirDesign @Bo1233 @FaLLin1 @DDVC @xNotDumb @Kalashinikov @Mage2IsTriggered @Teako @Type2volkswagen
Released!
@Lake Hi I read your comment but I didn't understand exactly what the purpose was. But I hope this is the answer
Flying Pancake
@IDNSatyaBUKANNova It is possible if you install Windows on your cell phone!
@LUCAS2077
1.
https://www.simpleplanes.com/Forums/View/1534176/IA-Image-Importer
It is a program that can be easily used by the general public by simply uploading an image after installing the program.
2.
https://www.simpleplanes.com/Forums/View/1454422/So-Jundroo-accidentally-added-1-part-custom-images-to-the-game
Automation program powered by Visual Studio (C# language).
Please refer to the post on the link
@JakeTheAviationTeen Hi, this mod does not work on Android at this time. Thank you
@xNotDumb What happened???
Thank you for your hard work and effort for me!😄
@V lol I will write a related post within this week
@LowDeadDiper 🙂
@LowDeadDiper You can use it in the space where you write the text(designText).
Use rich tag!
How?)
<size=Percentage of text size you want%>text
@Tsuchiisan The score is fine...! It made deliberately difficult to understand. And I think feedback on question 9 should be reflected. I just didn't think much about "type".
Then, I think I can leave the Android question as it is, but I will change it.
@ZeroWithSlashedO LOL 🤣
@Lockheadmartion From kakhis's plugin
@TheFlyingHusky I got it from kakhis's plugin!
; )