Haha, that’s a good start. The wings look ugly, the propellers are too far off from the fuselage (and also not equal), and there are 2 big vertical stabilizers instead of one, and the landing gear is too long and few, compared to other large seaplanes.
.
Learn some more so you can make better looking planes. You should use references when making planes. Fuselages and hollow fuselages have you the freedom to make good, looking stuff; you can also “slice” said fuselages. I hope you have fun with the site.
.
P.S. everything you do must follow the rules, if you do not follow these rules, you might get yourself into trouble.
Challenge organizer: “Noooo! You cannot just cheat the challenge with a detacher! You’re disqualified from all challenges! Nooooo!”
The cheater: “Haha, detacher go tchish!”
Hi. Your pictures are like a luxury brand advertising business jets - the plane depicted is an actual business jet either.
.
White Grey is okay for me, because it helps users distinguish between the primary color and secondary color, while also being pretty basic.
You have taken a lot of time to refine the details and the looks and color scheme made me think that the mech is from an anime-styled freemium videogame. Good job.
The vehicle is still way out of proportion (especially the nose). Plus the wheels are placed too far away from each other (and also too small). You could use the jackhammer as reference when you build such things in the future.
It is often very difficult and part consuming to implement said drive axles. Stock wheels do not rotate along with their axles either and fuselage wheels may have their own problems (like “jittering” as one user reported). I find it easier in Simplerockets2 than in Simpleplanes to make such drivetrains.
@SheriffHackdogMCPE, I do not think there was discriminative intent at the developers removing mod support on mobile platforms; it’s due to technical reasons that prevented them from implementing mod support in mobile. They still have access to Overload and DeisgnerSuite though.
While it doesn’t look as close as the real car, it’s pretty decent. Also you got a good take at the cockpit of a car. I do like if those levers are somehow placed at the driver’s feet and are piston throttles (forgive me, I forgot the actual name of this stock part) instead of levers, so they look like early pedals for the driver to push with it’s feet.
Well that’s pretty nice looking, isn’t it? You should paint the plane white and not some pre-painted colors. You should also add some detail to the windshield (3 pillars separating the windshield into 4 pieces is enough). Also the square windows might suggest the cabin is unpressurized.
You need to use and utilize control bases and grips in a correct manner to create custom yokes. It generally takes more time and effort to create custom yokes, especially the complex F1 steering wheel. I will give you some tips:
Use references:
Using references can help you create a more accurate yoke. You can download a mod called “DesignerSuite” and use blueprints for better accuracy.
Acknowledge the limitations:
If there is no stock knob, try to improvise a way to create a knob. Try to scale down (with Overload) and use the control base and grip then model it after knobs to create said knob.
Be patient:
If you become impatient, try to meditate yourself. Being calmer and more patient helps you to be better at creating stuff. You can postpone your work later. Also, don’t set deadlines; that might make you hurry to meet said deadlines and that can lower the quality of your build.
That’s all the tip’s I got for you. Good luck on your work. :)
There isn’t any way to know which triggers controversy. I have documented historical causes for various controversies, including:
posting something that might be perceived, by the community or parts of it, to violate the rules, even if moderators confirm they do not.
posting anything that appears to be related to a controversial subject (like the war in Ukraine or anything related to Taiwan).
creating a post that defies their expectations (e.g. a poorly made airbrake-laden plane that suddenly gained a large amount of upvotes)(though it does not always turn into controversy).
Creating a poorly-intentioned meme post (like creating a post based on a meme that has been overly used over and over again to the point that it became boring and viewed as spam by the community).
This is all I can get to you. There might be more causes to trigger controversies but I cannot state all of them. One of the best ways are to be polite and NOT to be rude. Always try to follow the rules because they help you navigate the community without causing trouble. If you don’t like to follow the rules, then please leave this community.
@Juno, as with DeveloperKorzalerke’s comment, no. Tully2001 voluntarily deleted his account; Tully2001 did come back, until he deleted the account again.
Pretty much detailed in a low part count. Only things I want to point out are that the windows have no glass, and most modern-modern day cars now have windows. Also, it looks more like a station wagon than an actual sport utility vehicle (SUV), according to me.
It is every player’s right to block whomever they wish for whatever reasons they wish.
Being blocked by a user in no way hampers your ability to enjoy the game or this website. If someone blocks you, be a better person and simply move on.
If you retaliate in response to being blocked, then you will be banned. Do not post or comment about a player who blocked you, about a specific player who blocked a friend of yours, or about a specific incident about specific people involved in blocking one another.
That comment by Korzalerke below this comment illustrates this. By the way, it is also pointless to make such a post about being blocked, as some reasons are entirely random. You should just be a better person and move on instead.
.
And don’t even think about creating and using new account to get around the block.
found one form rcgroups.com.
.
The bottom room is the “Texas deck” (so called because many areas are named after states, and at one time it was the largest state in the United States of America, like how the captain’s quarters is the largest area in said tugboat). It usually contains the crew quarters. More information in here.
I do not know, I have to research. This meme is new to me.
.
Update:
I have found out that the meme surfaced in the early to mid 2010s and appears to have gained resurgence in 2019, which is how this meme got here.
That’s how crediting artists works. Saying “credit to the original artist” does not sufficiently count as proper credit, you at least must state the name of the artist; it’s even better if you provide the link to said original part. Hope that helps. :)
@JDFJBYHK, Indonesia; it’s in my bio already. Why are you asking?
.
And “Beiyang” seems Chinese to me, so the airline company is likely of Chinese or Taiwanese (no politics please, the rules do not allow politics here) origin.
What a cool drone plane, isn’t it? Only things I do not like are the useless inlets on top of the usual inlets and the navigation lights do not look standard to me (the lamps at the tip of the vertical stabilizers look “floating”, you need to make them fused).
.
I would like more if it is painted in matte gray but up to you.
@Bobyo, hmmm...
.
My theory would be that the cannon has “FireWeapons”, and that any parts on AI aircraft that uses said input may activate if they had successfully locked onto an aircraft. I might test what could the AI do if I replaced the “FireWeapons” input with “FireGuns” input; would it act like a gun?
.
P.S. I have discovered that there is no way to change the input of the cannon part.
It does not look like a conventional helicopter. What if you remove the propellers at the tail and replace it with a vertical stabilizer instead?
+1Too much bombs but otherwise good wings. It got weird looks to me either.
+1Haha, that’s a good start. The wings look ugly, the propellers are too far off from the fuselage (and also not equal), and there are 2 big vertical stabilizers instead of one, and the landing gear is too long and few, compared to other large seaplanes.
+1.
Learn some more so you can make better looking planes. You should use references when making planes. Fuselages and hollow fuselages have you the freedom to make good, looking stuff; you can also “slice” said fuselages. I hope you have fun with the site.
.
P.S. everything you do must follow the rules, if you do not follow these rules, you might get yourself into trouble.
The cruiser that rammed a cruise ship.
Out in theaters now!
+1My most upvoted comment, as of this post, was a satirical dialogue based off the “Nooo, you can’t X” meme, regarding using detachers to easily finish the “going the distance” level (which gives you an achievement of the same name). The contents of this comment were:
Some of my most upvoted comments included:
+1- An highly exaggerated reaction to the first comment Jundroo’s official account made, treating said account as a malicious artificial intelligence.
- A summarized list of controversies that has ever happened in SimplePlanes.com.
I hope you do not lose interest in your new project. Good luck with that.
+1@qblMQ123, I mean the height is short, not the length. Troops could not fit into such a stubby vehicle.
+1Pretty nice replica attempt. Unfortunately, I cannot inspect the cockpit, so...
+1Hi. Your pictures are like a luxury brand advertising business jets - the plane depicted is an actual business jet either.
+1.
White Grey is okay for me, because it helps users distinguish between the primary color and secondary color, while also being pretty basic.
You have taken a lot of time to refine the details and the looks and color scheme made me think that the mech is from an anime-styled freemium videogame. Good job.
+1Nice, but from my sight, the cockpit looks bare.
+1Pretty nice IFV, though a little too short.
+1What is the issue?
+1.
Is it bad flight (X-Wings are not fly able aerodynamically), the gyroscope being so rigid, the vibrations, or what?
That’s pretty nice for this little tank. The spaced armor gives defense.
+1@WilliamHenryHarrison, that is because the chunk rendering cannot reach you at that speed; or you may have gone up too far away from the land.
+1The vehicle is still way out of proportion (especially the nose). Plus the wheels are placed too far away from each other (and also too small). You could use the jackhammer as reference when you build such things in the future.
+1SimplePlanes is older than SimpleRockets2 and SimpleRockets2 did not garner enough publicity than in SimplePlanes.
+1If you cannot make smooth camouflage with that many parts, paint it in 1 color instead, so it doesn’t look botched to me.
+1It is often very difficult and part consuming to implement said drive axles. Stock wheels do not rotate along with their axles either and fuselage wheels may have their own problems (like “jittering” as one user reported). I find it easier in Simplerockets2 than in Simpleplanes to make such drivetrains.
+1According to my tests, no, it does not ping a user if you edit the ping to tag said user.
+1@SheriffHackdogMCPE, I do not think there was discriminative intent at the developers removing mod support on mobile platforms; it’s due to technical reasons that prevented them from implementing mod support in mobile. They still have access to Overload and DeisgnerSuite though.
+1While it doesn’t look as close as the real car, it’s pretty decent. Also you got a good take at the cockpit of a car. I do like if those levers are somehow placed at the driver’s feet and are piston throttles (forgive me, I forgot the actual name of this stock part) instead of levers, so they look like early pedals for the driver to push with it’s feet.
+1Well that’s pretty nice looking, isn’t it? You should paint the plane white and not some pre-painted colors. You should also add some detail to the windshield (3 pillars separating the windshield into 4 pieces is enough). Also the square windows might suggest the cabin is unpressurized.
+1You need to use and utilize control bases and grips in a correct manner to create custom yokes. It generally takes more time and effort to create custom yokes, especially the complex F1 steering wheel. I will give you some tips:
Using references can help you create a more accurate yoke. You can download a mod called “DesignerSuite” and use blueprints for better accuracy.
If there is no stock knob, try to improvise a way to create a knob. Try to scale down (with Overload) and use the control base and grip then model it after knobs to create said knob.
If you become impatient, try to meditate yourself. Being calmer and more patient helps you to be better at creating stuff. You can postpone your work later. Also, don’t set deadlines; that might make you hurry to meet said deadlines and that can lower the quality of your build.
That’s all the tip’s I got for you. Good luck on your work. :)
+1There isn’t any way to know which triggers controversy. I have documented historical causes for various controversies, including:
This is all I can get to you. There might be more causes to trigger controversies but I cannot state all of them. One of the best ways are to be polite and NOT to be rude. Always try to follow the rules because they help you navigate the community without causing trouble. If you don’t like to follow the rules, then please leave this community.
+1@Juno, as with DeveloperKorzalerke’s comment, no. Tully2001 voluntarily deleted his account; Tully2001 did come back, until he deleted the account again.
+1@WrightAIRCAR, you can put a redirect, so users who visit this post can see the new post.
+1Pretty nice though. Where are the inlets for the turbo shaft? Does this have a cockpit?
+1Pretty much detailed in a low part count. Only things I want to point out are that the windows have no glass, and most modern-modern day cars now have windows. Also, it looks more like a station wagon than an actual sport utility vehicle (SUV), according to me.
+1@TRD6932, I might do tests in an unlisted post, hold on!
+1Nice PFP, @Bellcat, @TRD6932 .
+1No, it didn’t ping me. I’ll do another test with a new comment.
+1XD. I think this is an April fools joke.
+1You got the aircraft lighting wrong. Here is the guide to aircraft lighting from eBaum’s world.
+1Really good amount of effort. Hopefully you can make crafts with good looks like this one.
+1@mahardika, well that took you an amount of effort. You should put your effort in making better crafts with more details.
+1Looks realistic and stealthy (albeit without the top weapons bay). Just paint it in a reasonable military color (like matte gray).
+1Tell me what are the improvements over the original?
+1From the rules:
That comment by Korzalerke below this comment illustrates this. By the way, it is also pointless to make such a post about being blocked, as some reasons are entirely random. You should just be a better person and move on instead.
+1.
And don’t even think about creating and using new account to get around the block.
Make sure you go into the xml files and modify an attribute called “url”, if I do not forget, so said attribute becomes the same.
+1found one form rcgroups.com.
+1.
The bottom room is the “Texas deck” (so called because many areas are named after states, and at one time it was the largest state in the United States of America, like how the captain’s quarters is the largest area in said tugboat). It usually contains the crew quarters. More information in here.
Hey, that looks just like my profile picture! (To be honest, I have used an upside down profile picture of DestroyerZ, but whatever.)
+1YOU HAVE ADVANCED TO THE ⑨TH DIMENSION OF MATHEMATICS
I do not know, I have to research. This meme is new to me.
+1.
Update:
I have found out that the meme surfaced in the early to mid 2010s and appears to have gained resurgence in 2019, which is how this meme got here.
@CNOceanLin, I can give you an example.
That’s how crediting artists works. Saying “credit to the original artist” does not sufficiently count as proper credit, you at least must state the name of the artist; it’s even better if you provide the link to said original part. Hope that helps. :)
+1You should use the same wheels as the wheels as the back. Landing gear for the front wheels will give it an unrealistic look.
+1Looks pretty nice (although it doesn’t look accurate) and simple.
+1@JDFJBYHK, Indonesia; it’s in my bio already. Why are you asking?
+1.
And “Beiyang” seems Chinese to me, so the airline company is likely of Chinese or Taiwanese (no politics please, the rules do not allow politics here) origin.
Ah yes, the fictional Koenigsegg, stripped down to become faster...
+1What a cool drone plane, isn’t it? Only things I do not like are the useless inlets on top of the usual inlets and the navigation lights do not look standard to me (the lamps at the tip of the vertical stabilizers look “floating”, you need to make them fused).
+1.
I would like more if it is painted in matte gray but up to you.
@Bobyo, hmmm...
+1.
My theory would be that the cannon has “FireWeapons”, and that any parts on AI aircraft that uses said input may activate if they had successfully locked onto an aircraft. I might test what could the AI do if I replaced the “FireWeapons” input with “FireGuns” input; would it act like a gun?
.
P.S. I have discovered that there is no way to change the input of the cannon part.