@Cestbon Thank you for support ！the aircraft isn't truly finished , I paused it from this feb. to July because of schoolwork(partly for I had trouble making its main landingears' structure).After stopping for several months,I'll continue to finish it during my summer vacation.我写完之后才发现你也是中国人💦↓
感谢您的支持！这架飞机还没有真正完成，由于功课，我从今年2月到7月暂停了它（部分原因是我在制作主起落架收放结构时遇到了问题）。我会在我的暑假中继续完成它
I don't think it will replace the SP, although it can save a lot of time on the construction of fuselages or wings with complex cross-sections, as well as the livery editor, but it also has quite a few disadvantages, the most obvious is the high performance requirements, followed by the adaptation of the mobile terminal, and there is no SP openness, etc. I think the FO is very promising, and the SP2 may be slightly better if released (I hope the SP2 still supports the current SP's aircraft model) (I suddenly remembered the 12.200 update, hoping to add another knob to adjust the larger value)
@linxiaofeng2339 clamp01(SPD>IAS3.6)clamp01(Activate6)-rate(TAS)clamp01(abs(IAS3.6-SPD)<5)
This code is newly written by me to maintain a speed error below 2km/h on TwinProp
The input of the spoiler can be changed to IAS*3.6>(SPD+5)
I'm making a new version of autopilot, but I didn't finish the VY control
https://www.simpleplanes.com/a/4I11JL/AutoPilot-TestTwin-Prop
It can maintain the speed, heading, altitude of the input, this is just a rudimentary version and I am still updating it
@Cestbon 刚改的
@A380istheGOAT what stuff you are
@Pakkoyan What are you saying (request an English translation
+1expect the next update！
@SARACONIKaviationIndustry 3克油
@Taklingplanes delicious roast potato！
+1I want to make its driving feel real , reference BeamNG , it's hard to control , right ?
I resized it , for it was too large...
Light speed！
+1@Suubk27 我也快要备战中考了💦
+1@SARACONIKaviationIndustry 佬能不能帮我解决一些label的技术问题啊🛐
so many parts , will it go well after I put it on the fuselage on my old computer !?
+1问下佬label文本怎么规定层级
@Cestbon @Cestbon 我发的哪个回复有错别字💦
@Cestbon Thank you for support ！the aircraft isn't truly finished , I paused it from this feb. to July because of schoolwork(partly for I had trouble making its main landingears' structure).After stopping for several months,I'll continue to finish it during my summer vacation.我写完之后才发现你也是中国人💦↓
感谢您的支持！这架飞机还没有真正完成，由于功课，我从今年2月到7月暂停了它（部分原因是我在制作主起落架收放结构时遇到了问题）。我会在我的暑假中继续完成它
@cx332 应该就是一个高像素位图，unity貌似不支持有渐变的矢量图，并且不显示影子
@Deandash 臭地图（喜
这个驾驶舱用了多少零件啊，我感觉我的电脑可能扛不住我做完内饰的919了，哈哈哈哈
+2我第一次做驾驶舱，请问您寒假有时间解答一些问题吗（doge
@NormalCv580enjoyer humorous!
But in the future, I will streamline some unnecessary parts
If you want to keep track of this post, please follow me or reply below and I'll @ you next time
i'll
292parts，why not 262parts
+1@XiaoNaiTang 检查版本，比如说切割是在1.11中加入的，1.10及以前版本就没有，如果你在网上找不到破解版可以到倾城勿泪的qq群里下载562377132
+1@Aifleron simplecooking
Is this the best content on the homepage now, not as good as before
+1@BigAeroplane 英语不好用一段时间就熟悉了，而且b站上也有很多教程，还有我想提醒你sp不用实名（手动狗头
+2↑这也是中国人↑
+2在sp里造一架精致的飞机很难，如果你有大把的时间可以做，但是如果时间很少的话就不建议造的过于细致了，并且移动端的操作要远复杂于电脑，如果你非常愿意造飞机，就坚持下去，每个sp社区里的人都会支持创作者的。
I don't think it will replace the SP, although it can save a lot of time on the construction of fuselages or wings with complex cross-sections, as well as the livery editor, but it also has quite a few disadvantages, the most obvious is the high performance requirements, followed by the adaptation of the mobile terminal, and there is no SP openness, etc. I think the FO is very promising, and the SP2 may be slightly better if released (I hope the SP2 still supports the current SP's aircraft model) (I suddenly remembered the 12.200 update, hoping to add another knob to adjust the larger value)
@schinaplayer 不算内饰2000个一下，做完内饰就不一定多少了
@RepublicOfCursedPlanes I also hope that the C919, which I have been rubbing for a year, will be on the homepage，hha
@linxiaofeng2339 clamp01(SPD>IAS3.6)clamp01(Activate6)-rate(TAS)clamp01(abs(IAS3.6-SPD)<5)
This code is newly written by me to maintain a speed error below 2km/h on TwinProp
The input of the spoiler can be changed to IAS*3.6>(SPD+5)
I'm making a new version of autopilot, but I didn't finish the VY control
大佬能不能把外形造的荔枝一点
This is made according to my ideas
This sentence is because of me,haha~
flying egg！
+2https://www.simpleplanes.com/a/4I11JL/AutoPilot-TestTwin-Prop
It can maintain the speed, heading, altitude of the input, this is just a rudimentary version and I am still updating it
@ComradeLaomao activate1
好东西，零件不多还很细节
@1714 《几天》
I'm making C919
@schinaplayer 你去看那个帖子下的评论（乐
+1@YUKIKAZESAMANANODA 只有机头是我造的，大部分都是1714制作的
+1Only the nose was made by me, most of it was made in 1714
@realSavageMan 就是发教程视频得拆这飞机
+1同志，1714的c919是基于我的c919机头（乐
+2How can this thing have so many upvotes
好多零件的涂装
神爹强无敌
+1外观狠烂，但是驾驶舱深跌强无敌
华侨都喜欢玩sp吗ahh（doge)
好看，可以用作ai机
@NoblePlanes Mockups of some of the tutorials I posted at bilibili need to link to here
If you find it annoying, I'll make it private later
How about making an airport as a map with Minecraft
+1