@TakicraftCorporation perfect, i also nudged the suspension together to make room for any further parts. working on both bumpers this week then side panels, roofing and aerodynamics
The interior frame is temporary... just to hold the thing together and keep a center for mirroring, ill make the floor and driveshaft housing once its done so you’ll have a better reference and starting point @TakicraftCorporation
Ive been working on this for a while now,id like some help with it later on as far as scaling, interior and detail work. If thats not too much to ask. And of course once it’s finished we can both post it and give eachother credits for the portions we did.@TakicraftCorporation
The rotators connector points are glitched. I messed around with the thing for a bit and found that taking the Bottom fuspension arm and rotators from the front suspension, copying it and replace it with the rear ones works well, but you will have to safely remove the bumper so you can place the part in without it connecting to the wrong parts. Nudge the bumper back in place but maybe farther back since this bug is caused by having too many connecting points too close to a rotator
Thanks! Right now im shaping up the body of the car, i got the basic shape of the hood and am working on the grill. Though some parts like connecting triangular curves are really difficult @MrAspy
When you enter a drift you have to counter steer to maintain angle and trajectory, just like in real life . Its a bit of a learning process but its fun once you get the hang of it@MrAspy
Thanks, i was planning on tuning the alignment and camber of the wheels bu i want sure if the wheels had that detailed of physics. Il do dome testing on my controll chassis to make sure of it@BlobfishMaster
I cant tell when it will be done, the project is a stop and go thing based on ideas i pull outta my rear... im trying to think of how to make the curves on the body.@Tank6376
The suspension is stiff with low travel, meant to withstand heavy downforce, itll bottom out on a rally track, but im also working on an off road vehicle @MrAspy
My ipod can handle max 1000 parts... what’s the setup? I can probably diagnose the problem based in the details you give me of your machine...@hotweels
What can i say, i have a fine eye for detail... i was gonna add more but my current iOS device can only handle 700-800 parts, so i left it here to be safe for other mobile users@jamesPLANESii
Ww2 had jets... can you make an exception so long as it stays under the sound barrier? Jet planes never reached past the speed of sound until late in the cold war (after ww2 before vietnam)
Can be fictional but has to follow all the limitations of today’s outdated crafts... also it cant defend itself with anything besides countermeasures and relies on nonexistent support aircraft in the game to protect it.
Maybe Edit the rules to fit the expectations and limitations of the game instead of the real world, cuz this takes the fun out of simpleplanes. The game is basically about escaping from the limitations of the real world and crafting our wildest ideas into a reality and see what they do
Lol its ok, im looking forward to more competitions, but I deleted the game so I could update it (my iPod is screwed up so that’s how i do it) but now i cant download the game for some reason, il be getting my razer phone (gold edition) within a month or so@jamesPLANESii
looks exactly like one of my old accoun'ts planes, but modified...
@MrAspy
Also the car will be a rear engine, 2 seater which should help simplify the interior a bit
Ok, when finished ill make my roof a sub assembly. Before i send it off to you@TakicraftCorporation
@TakicraftCorporation perfect, i also nudged the suspension together to make room for any further parts. working on both bumpers this week then side panels, roofing and aerodynamics
The interior frame is temporary... just to hold the thing together and keep a center for mirroring, ill make the floor and driveshaft housing once its done so you’ll have a better reference and starting point @TakicraftCorporation
Ive been working on this for a while now,id like some help with it later on as far as scaling, interior and detail work. If thats not too much to ask. And of course once it’s finished we can both post it and give eachother credits for the portions we did.@TakicraftCorporation
Or enhanced graphics, finally smooth out the terrain on the islands and smooth the jumps and race courses. Really annoying
Id like to see that you have in mind :)@MrAspy
The rotators connector points are glitched. I messed around with the thing for a bit and found that taking the Bottom fuspension arm and rotators from the front suspension, copying it and replace it with the rear ones works well, but you will have to safely remove the bumper so you can place the part in without it connecting to the wrong parts. Nudge the bumper back in place but maybe farther back since this bug is caused by having too many connecting points too close to a rotator
Thanks! Right now im shaping up the body of the car, i got the basic shape of the hood and am working on the grill. Though some parts like connecting triangular curves are really difficult @MrAspy
Itll also handle better after some fine tuning omce the body is finished @MrAspy
When you enter a drift you have to counter steer to maintain angle and trajectory, just like in real life . Its a bit of a learning process but its fun once you get the hang of it@MrAspy
Thanks@MrAspy
Thanks, i was planning on tuning the alignment and camber of the wheels bu i want sure if the wheels had that detailed of physics. Il do dome testing on my controll chassis to make sure of it@BlobfishMaster
Thanks @DJS8Corporations
Its not based on anything... but its starting to look like that Mercedes concept for some reason, but im gonna try to jeep it original @Tank6376
Thanks @Dogeoverlord
What do you mean by deja vu? Is there another similar car?@BuiltBionixInd10
I cant tell when it will be done, the project is a stop and go thing based on ideas i pull outta my rear... im trying to think of how to make the curves on the body.@Tank6376
The suspension is stiff with low travel, meant to withstand heavy downforce, itll bottom out on a rally track, but im also working on an off road vehicle @MrAspy
Sure thing, just make sure to mention me :)@Winstonlharambe
I know, i get that lol@AWESOMENESS360
The build a turret for me plz challenge lol
Thanks! This is me trying to relight my creative flame in sp@Chancey21
Can u use the truck body for something?
No problem@Finn8484
Might be a file error, did it crash before it was in the game?like in the map? Or in the builder?@hotweels
My ipod can handle max 1000 parts... what’s the setup? I can probably diagnose the problem based in the details you give me of your machine...@hotweels
Dont forget draft members @Stellarlabs
I am making one, im trying to make a Grumman avenger based on what my grandfather piloted and got a double-ace with @tsampoy
Maybe i will lol@DemonSniper8
What can i say, i have a fine eye for detail... i was gonna add more but my current iOS device can only handle 700-800 parts, so i left it here to be safe for other mobile users@jamesPLANESii
Thanks @CRJ900Pilot
Loved?@Pilotcal7
You said you’d remove a point if i used jets...@RodWan
Or the de haviland vampire
Or the messerschmit me-262
For example (the MIG)
Ww2 did have jet engines dude@RodWan
Ww2 had jets... can you make an exception so long as it stays under the sound barrier? Jet planes never reached past the speed of sound until late in the cold war (after ww2 before vietnam)
It doesn’t work like that with drag modifications, once the part is moved the properties reset, it has to be done directly @F104Deathtrap
I’ll find someone else, thanks for trying though@HistoricBirds
Thanks, can you send me a link?@HistoricBirds
Can be fictional but has to follow all the limitations of today’s outdated crafts... also it cant defend itself with anything besides countermeasures and relies on nonexistent support aircraft in the game to protect it.
Maybe Edit the rules to fit the expectations and limitations of the game instead of the real world, cuz this takes the fun out of simpleplanes. The game is basically about escaping from the limitations of the real world and crafting our wildest ideas into a reality and see what they do
Make the engines much bigger
And thanks for all the support even though ive been absent for over a month @jamesPLANESii
And thanks for all the support even though ive been absent for over a month @jamesPLANESii
Lol its ok, im looking forward to more competitions, but I deleted the game so I could update it (my iPod is screwed up so that’s how i do it) but now i cant download the game for some reason, il be getting my razer phone (gold edition) within a month or so@jamesPLANESii
Ah, i agree with that, its definitely harder to present on ios@jamesPLANESii