@126 of course. I'll accept the ai request. But later. I'm planning to make something like "official Ai request center (™)" thing. So i don't have to confused with other notifications.. XD
@126
I'm sure it's all because i changed the method of how i make the fenders.
My previous cars' fenders were made in the way like this. Place the hollow fuselage as same as wheel's direction.
Good thing in this method is, Requires very fewer part to make a fender.
But the minus is, hasn't much capable to make more accurate shape. And even it causes an texture glitch when you shorten its length way too much. (This thing happened very often, and it's even make me want to give the whole project up 💀)
And.. since i was making lightning mcqueen, i decided to change the method how i make the fenders.
It is looking like this.
Place the fuselage to facing forward, Instead of placing the fuselage as same as wheel's direction.
Minus thing is, there's no way to find efficient in this method.
But the Plus is, giving the modeler a capable of replicate more accurate shape without worrying of texture glitches or anything.
Oh or maybe because my code didn't find the "variable output" such as SS_R , SS_LWRPM_R and WRPM_L from two rear wheels. Try to give these names to each correct one at the variable output of each two rear wheels first, and then try to copy the codes to your car.
(I'm not sure am english'ing right, especially when it goes complicate like this..)
Instead copying all the variables one by one youself, what about to copy all the variables from here to there at onece? But ofcourse, you have to make a backup before you doing this kind of action.
@LunarEclipseSP yes, very much. :D
But while GT-R has interior without over 1000 part count, this R8 one is already over thousands of part count without interior. So i'm not sure am i'll be able to make the interior.
@126 i just made detailed rims yesterday, and total p/c of whole car is 1027. (Yes, no interior.) I'm not sure am i'll be able to make the interior. Due to how hot my phone is..
I'm, uh, kinda.. yes. But since that one of mine is too outdated, what about to take a look at this one instead? It's a bit newer, and has better modelings
This gif is exactly made by me, but the racing track's not.
Luckily, the original creator of this map has let the android users to download map from google drive. Here is the link to his comment.
@dyHU
Have you ever noticed/tried to activate my built-in function "CompatibleMode"? It's preventing the gear system from causing problem on low physics.
@QuebecorMotorCompany
every configuration between the version With Ai and without is exactly same (except 3 parts that were removed. Camera, Joystick base, label. These are only needed for human).
@DatFiat126Fan19
You don't have to sorry to me.
Btw, kinda lot of peoples tagging me on somewhere. Cannot even compare with how you've tagged me just once, lol...
@ThatRandomCouchPotato
It's just Simple Hyper with Additional body kits, which i'm planning to upload later. (it was inspired from Porsche 935 racing car.) but maybe it would be delayed a bit, because a lot of other reasons (one of them is, as soon as i load it, my phone's temperature is just INTENSIFIES.. 🔥)
T
@GrFrog
T
@CaptainBrayden
@ChaseRacliot
@SETSUNA0414
T
@NINJ4
@Pakkoyan
@L3FT2R1GHT
T
@Cereal
@ThatRandomCouchPotato
@ConvoyPerson
T
+2@TheNewSPplayer
@001
@BYardley
A/T 3 @intruder72 @Zhixunlin23
A/T 2 @TheMouse @RealMicroZackSP @TheSPTuner
A/T 1 @MAPA @DatFiat126Fan9 @Lwillswith2sentryguns
Surprisingly well done!
+1I decided not to make interior. my phone is about to grill my finger.. 🔥
+6VERY blurred XD
@SimpleCreate i'm building an R8 but it's way too much part counts 📈📈
+1💀
BMW Taillights!!!
@126 of course. I'll accept the ai request. But later. I'm planning to make something like "official Ai request center (™)" thing. So i don't have to confused with other notifications.. XD
+1@126
+1I'm sure it's all because i changed the method of how i make the fenders.
My previous cars' fenders were made in the way like this. Place the hollow fuselage as same as wheel's direction.
Good thing in this method is, Requires very fewer part to make a fender.
But the minus is, hasn't much capable to make more accurate shape. And even it causes an texture glitch when you shorten its length way too much. (This thing happened very often, and it's even make me want to give the whole project up 💀)
And.. since i was making lightning mcqueen, i decided to change the method how i make the fenders.
It is looking like this.
Place the fuselage to facing forward, Instead of placing the fuselage as same as wheel's direction.
Minus thing is, there's no way to find efficient in this method.
But the Plus is, giving the modeler a capable of replicate more accurate shape without worrying of texture glitches or anything.
@Lwillswith2sentryguns sure. but even that one is still alot, like over 800 part as you seen on first pic.
Oh or maybe because my code didn't find the "variable output" such as
+1SS_R,SS_LWRPM_RandWRPM_Lfrom two rear wheels. Try to give these names to each correct one at the variable output of each two rear wheels first, and then try to copy the codes to your car.(I'm not sure am english'ing right, especially when it goes complicate like this..)
I'm driving agera at grid a/tsport, and its feeling of power is just 💪💪
Instead copying all the variables one by one youself, what about to copy all the variables from here to there at onece? But ofcourse, you have to make a backup before you doing this kind of action.
+1The Power of Agera is 💪💪💪
+1@LunarEclipseSP yes, very much. :D
+1But while GT-R has interior without over 1000 part count, this R8 one is already over thousands of part count without interior. So i'm not sure am i'll be able to make the interior.
@126 i just made detailed rims yesterday, and total p/c of whole car is 1027. (Yes, no interior.) I'm not sure am i'll be able to make the interior. Due to how hot my phone is..
+2@Kuruma234 yes
I'm, uh, kinda.. yes. But since that one of mine is too outdated, what about to take a look at this one instead? It's a bit newer, and has better modelings
+1Ah D: D: i can understand what you feel..
@DatFiat126Fan19
Not very much but
This is how its progress looks like.
(A very little changes and progress per day.. 🐌)
@SamTheUncle
+1This is nice.
+1A true "German car"??
This gif is exactly made by me, but the racing track's not.
Luckily, the original creator of this map has let the android users to download map from google drive. Here is the link to his comment.
@dyHU as you can check it out from my profile, i'm from south korea :D
+1tt
Reminds me a Clutch plate??
+1@dyHU
+1Have you ever noticed/tried to activate my built-in function "CompatibleMode"? It's preventing the gear system from causing problem on low physics.
@dyHU You can control the gear by move the Trim (slider on the right side of your screen) up and down.
@Lwillswith2sentryguns maybe, after my two new cars were published.
@QuebecorMotorCompany
+1every configuration between the version With Ai and without is exactly same (except 3 parts that were removed. Camera, Joystick base, label. These are only needed for human).
@DatFiat126Fan19
You don't have to sorry to me.
Btw, kinda lot of peoples tagging me on somewhere. Cannot even compare with how you've tagged me just once, lol...
@ThatRandomCouchPotato
+2It's just Simple Hyper with Additional body kits, which i'm planning to upload later. (it was inspired from Porsche 935 racing car.) but maybe it would be delayed a bit, because a lot of other reasons (one of them is, as soon as i load it, my phone's temperature is just INTENSIFIES.. 🔥)
Gaming mouse?
+1No, the Racing Mouse!!
@Majakalona yeah 🌊🌊🌊
+1What if i do
Excellent!! It is good to finally see a proper variation of McQueen i made.
From P L A N E
+4To "plan"
💀💀
Idk why it does, but this car reminds me Assetto corsa 🏎
+1@ConvoyPerson
+1Kinda arcade'ish, because the car it self is real quick and has very light weight. You can get it on here anyway
@whydoesmehavestupid
This one is only for Ai, but..
Still, you can drive the original one instead
Alt+F40..
+4@Zhixunlin23 Exactly. 😄 nice to meet you
+1